Click to Purchase and Download this Standard or Test Method
Revision Date: May 01, 1996
Updated On: April 01, 2002
Editorial Change: November 1, 2004
This specification covers an ambient-cured, two-component water-borne epoxy coating that is intended for use as a finish coat in multicoat water-borne epoxy systems for steel.
Topcoats are categorized according to performance levels.
Topcoats meeting this specification, when used with an appropriate primer, are suitable for exposures in Environmental Zones 1A (interior, normally dry), 1B (exterior, normally dry), 2A (frequently wet by fresh water), 2B (frequently wet by salt water), and 3C (chemical exposure, alkaline).
The specified topcoat is intended for application by brush, spray, or roller over primed surfaces prepared in accordance with the manufacturer's recommendations. It is suitable for use as a water-borne epoxy topcoat in a two-coat system or as an intermediate coat and topcoat in a three-coat system, to be applied in accordance with the manufacturer's recommendations.
NO FLASH RUST - NO CONTAMINANTS
Our HoldTight®102 salt remover & flash rush inhibitor prevents flash rust by removing surface contaminants. Contact us for your nearest distributor. (800) 319.8802 firstname.lastname@example.org
GOT LEAD? Specify Pretox System products
The ONLY Lead Stabilizer
Compatible with All
Paint Removal Methods.
Works with all Blast Media:
Grits | Recyclable Abrasives
| CO2 | Water | Power Tools | Etc.
Call Dave Steffen at 800.338.8296.