Click to Purchase and Download this Standard or Test Method
Revision Date: May 01, 1997
Updated On: April 01, 2002
Editorial Change: November 1, 2004
This specification covers a French process zinc oxide, raw linseed oil, and alkyd primer suitable for use over blast cleaned steel.
This is an alkyd/linseed oil primer containing 30% more alkyd resin than SSPC Paint 25. It is not recommended for hand cleaned steel.
This primer is suitable for exposures in Environmental Zones 1A (interior, normally dry) and 1B (exterior, normally dry), and is intended for brush, roller, or spray application over steel surfaces prepared in accordance with SSPC-SP 6/NACE No.3, Commercial Blast Cleaning, or SSPC-SP 11, Power Tool Cleaning to Bare Metal, or better. It is suitable as a shop primer, field primer, maintenance primer, or intermediate coat, and is to be applied in accordance with SSPC-PA 1, Shop, Field, and Maintenance Painting of Steel. If the primed part of the structure is to be exposed to the weather, it should be topcoated as soon as practical.
Nation Wide Equipment Rentals
Rapid Prep, LLC is a full service provider of sandblasting & all other surface preparation equipment, with 60 years of experience within the industrial painting industry.
Cooling Tower Protection
Denso’s Petrolatum Tape Systems provide protection for piping, conduit, electrical boxes, hangers, valves, flanges and sprinkler systems with minimal surface preparation required. Call 1-281-821-3355 or Visit densona.com
PREMIUM SLAG ABRASIVES
In surface preparation tests run for NIOSH by an independent
company, Sharpshot® was shown to be the best slag abrasive for
cutting speed and cost per sq. ft. Call Steve: 520-297-4626