Click to Purchase and Download this Standard or Test Method
Revision Date: May 01, 1997
Updated On: April 01, 2002
Editorial Change: November 1, 2004
This specification covers a slow drying French process zinc oxide, raw linseed oil, and alkyd primer suitable for use over hand-cleaned steel.
This primer is suitable for exposures in Environmental Zones 1A (interior, normally dry) and 1B (exterior, normally dry), and is intended for brush, roller, or spray application over steel surfaces prepared in accordance with SSPC-SP 2, Hand Tool Cleaning, or better. (Within the limitation stated in Section 2.1 of the standard) it is suitable as a shop primer, field primer, maintenance primer, or intermediate coat and is to be applied in accordance with SSPC-PA 1, Shop, Field, and Maintenance Painting of Steel. If the primed part of the structure is to be exposed to the weather, it should be topcoated as soon as practical.
Wasser Coatings Protect
some of the most important bridges in the country; learn about our NEPCOAT-approved system and our entire range of MCU & Polyurea coatings.
Schmidt Improves Portable Blasters
Schmidt's VBS System reduces blowdown intensity, prevents exhaust from damaging floor while using no screens or filters.
Reduces sound; Increasing safety. Call 1-800-231-2085
The Blast Pak
Van Air Systems' portable desiccant air dryer. Get dry compressed air with this All-In-One blasting and coating solution.
PREMIUM SLAG ABRASIVES
In surface preparation tests run for NIOSH by an independent
company, Sharpshot® was shown to be the best slag abrasive for
cutting speed and cost per sq. ft. Call Steve: 520-297-4626
Metal Patching Compound
One Part / Ready to Use / High Temperature. Fill surface imperfections, voids, rough welds prior to painting and powder coating.