Click to Purchase and Download this Standard or Test Method
Revision Date: November 01, 1982
Updated On: April 01, 2002
Editorial Change: November 1, 2004
This specification covers an air drying, ready-mixed, water-borne semigloss latex paint for use on metal surfaces primed with a primer conforming to SSPC-Paint 23, Latex Primer for Steel Surfaces. It is intended for use as a topcoat of a water-borne coating system consisting of two coats of primer, and one or two coats of this water-borne topcoat.
This paint is suitable for exposures in Environmental Zones 1A (interior, normally dry) and 1B (exterior, normally dry), and is intended for brush, spray, or roller application over properly primed steel surfaces and is to be applied in accordance with SSPC-PA 1, Shop, Field, and Maintenance Painting of Steel. It is not recommended to expose steel to the weather with less than two coats of waterborne coating; therefore, ntermediate and topcoats should be applied as soon as possible.
GOT LEAD? Specify Pretox System products
The ONLY Lead Stabilizer
Compatible with All
Paint Removal Methods.
Works with all Blast Media:
Grits | Recyclable Abrasives
| CO2 | Water | Power Tools | Etc.
Call Dave Steffen at 800.338.8296.
The MBX Bristle Blaster
Get a 2.7 to 3.3 mil profile and a
Near White Metal Clean.
For info visit www.mbxit.com
or call 877 629-8777
Blastox - One Step Lead Abatement
Don't waste $$ on added labor steps with other methods. Don't mix, meter or apply at the job-site. Avoid strict hazardous waste rules. Let your painters paint!