Click to Purchase and Download this Standard or Test Method
Revision Date: November 01, 1982
Updated On: April 01, 2002
Editorial Change: November 1, 2004
This specification covers an air drying, ready-mixed, water-borne primer for blast cleaned steel. It is intended for use as a primer coat of a water-borne coating system consisting of two coats of this primer, and one or two coats of a water-borne topcoat.
This primer is suitable for exposures in Environmental Zones 1A (interior, normally dry) and 1B (exterior, normally dry), and is intended for brush, spray, or roller application over steel surfaces prepared in accordance with SSPC-SP 6, Commercial Blast Cleaning. It is suitable as a shop primer, field primer, maintenance primer, or intermediate coat, and is to be applied in accordance with SSPC-PA 1, Shop, Field, and Maintenance Painting of Steel. It is not recommended to expose steel to the weather with less than two coats of water-borne coating; therefore, intermediate and topcoats should be applied as soon as possible.
Rubber In a can! Rubberized Spray in a Handy Aerosol Can
• Stays flexible
• Seals off moisture penetration
• Non sagging formulation
• Will not crack, chip or peel
• Apply to wet and dry surfaces
BLACK BEAUTY® App
Download the free app
for BLACK BEAUTY® Abrasives.
Explore all the features from
the palm of your hand. Toll Free: 1-888-733-3646
DELIVERY ANYWHERE - BEST PRICING - FAST!
Lighten your load by buying 50lb. bags at bulk rates. From 50lb. bags to Jumbo Sacks to Bulk Loads, CESCO provides packaging to meet your specific job requirements. Contact us: 888-772-3726 BlastandPaint.com
Wasser Coatings Protect
some of the most important bridges in the country; learn about our NEPCOAT-approved system and our entire range of MCU & Polyurea coatings.