Click to Purchase and Download this Standard or Test Method
Revision Date: November 01, 1982
Updated On: April 01, 2002
Editorial Change: November 1, 2004
This specification covers a ready-to-mix aluminum vinyl chloride, acetate copolymer paint intended for use over vinyl butyral wash primer (such as described in SSPC-Paint 27) or as a finish coat over vinyl chloride-acetate copolymer paint (such as described in SSPC-Paint 9). This paint is not intended or recommended for use over bare steel.
This paint is suitable for exposures in Environmental Zones 2C (fresh water immersion), 2D (salt water immersion), and 3B (chemical exposure, neutral), and is intended primarily to be used as a finish coat in a system applied to steel surfaces prepared in accordance with SSPC-SP 10, Near-White Blast Cleaning, or SSPC-SP 8, Pickling. When used for salt water immersion, a wash primer is recommended. Because of the possibility of lifting of the undercoats, this paint is not intended to be used over types of paints which have poor solvent resistance. This paint is intended primarily for application by conventional air spray and is to be applied in accordance with SSPC-PA 1, Shop, Field, and Maintenance Painting of Steel.
Rubber In a can! Rubberized Spray in a Handy Aerosol Can
• Stays flexible
• Seals off moisture penetration
• Non sagging formulation
• Will not crack, chip or peel
• Apply to wet and dry surfaces
GMA Garnet™ Natural Abrasives
- Superior cleaning performance
- Even Profile
- Low Dust
- Environmentally friendly
- Recyclable up to 5 times
Tel : +1 832 243 9300
Free Webinar Learn about soluble salts, along with a discussion on
More information at www.chlor-rid.com, 800-422-3217
Powerful Protection in a Small Package
Mounts inside blast helmet, alerts operator to dangerous breathing-air condition by audible, visual, and vibratory alarms. Easily calibrated, battery operated.