PaintSquare.com
      | Connect Follow us on Twitter Like us on Facebook
About | Subscribe | Advertise
  

 


SSPC-PS Guide 15.00, Guide for Selecting Chlorinated Rubber Painting Systems

All Standards | SSPC Standards
Search Standards


Click to Purchase and Download this Standard or Test Method

Revision Date: November 01, 1982
Updated On: April 01, 2002
Editorial Change: November 1, 2004
 
The specifications summarized and described in this guide cover chlorinated rubber painting systems for blast cleaned or pickled steel. These coatings are not recommended for areas exposed to strong organic solvents, oxidizing acids, or areas where the surface temperature exceeds 74 øC (165 øF). Straight chain unsaturated acids, and fats and oils of animal or vegetable origin will cause softening and swelling of these coatings.

These systems are suitable for use on parts or structures exposed in Environmental Zones 1A (interior, normally dry), 1B (exterior, normally dry), 2A (frequently wet by fresh water), 2B (frequently wet by salt water), 2C (fresh water immersion), 2D (salt water immersion), 3A (chemical exposure, acid), 3B (chemical exposure, neutral), and 3C (chemical exposure, alkaline).

Chlorinated rubber paints are single-package systems that dry by solvent evaporation and have low permeability to water vapor and oxygen. After drying, they are nonflammable and resistant to mildew growth.

The color of the finish must be specified.

(Back to all Standards)

 
   

Armorthane
Polyurethane and Polyurea Sprayed-On Protection

Buy POLYURETHANE or POLYUREA coatings and spray equipment for years of proven chemical resistance, water- and weather-proofing, and structural improvements.


International Paint LLC
Interplan Mobile

Effective maintenance planning and corrosion control all starts with an effective asset survey.


Carboline Company
Fireproofing Solutions

Pyroclad® X1 Thermo-Lag® Pyrocrete® – protecting against hydrocarbon and jet fires, explosions, and cryogenic spills.


HoldTight Solutions Inc.
NO FLASH RUST -
NO CONTAMINANTS

Our HoldTight®102 salt remover & flash rust preventer prevents flash
rust by removing surface contaminants. It has no equal; only wannabees.
Contact us for your
nearest distributor.
(800) 319.8802 sales@holdtight.com


DeFelsko Corporation
PosiTest Automatic Adhesion Tester

Electronically controlled hydraulic pump applies smooth and continuous pull-off pressure at user selectable rates. No twisting, pumping or cranking.


Advanced Recycling Systems
ADVANCED RECYCLING SYSTEMS (ARS)

Recycling Machines, Dust Collectors, Rapid Deployment units are time-tested and approved for the rugged industrial environment. Contact ARS today!
(330)536-8210


Abrasives Inc.
Need abrasives FAST?

Emergencies happen – who bails you out? One call to Abrasives Inc. and it's taken care of. Period. Sales support available 24/7.
800-584-7524


Fischer Technology Inc.
Measure TSA Coatings on Stainless Steel

The PHASCOPE® PMP10 from FISCHER precisely measures thermally sprayed aluminum (TSA) on stainless steel.


Elcometer, Inc.
Elcometer 106 Pull-Off Adhesion Tester

Portable, easy to operate; Provides numerical value for adhesion; Comes in carrying case - Ideal for site tests; No power supply necessary.

 
 
 
Technology Publishing

The Technology Publishing Network

The Journal of Protective Coatings & Linings (JPCL) PaintSquare
Durability + Design Paint BidTracker

 
EXPLORE:      JPCL   |   PaintSquare News   |   Interact   |   Buying Guides   |   Webinars   |   Resources   |   Classifieds
REGISTER AND SUBSCRIBE:      Free PaintSquare Registration   |   Subscribe to JPCL   |   Subscribe to PaintSquare News
MORE:      About PaintSquare.com   |   Privacy policy   |   Terms & conditions   |   Site Map   |   Search   |   Contact Us
 

© Copyright 2000-2015, Technology Publishing / PaintSquare, All rights reserved
2100 Wharton Street, Suite 310, Pittsburgh PA 15203-1951; Tel 1-412-431-8300; Fax 1-412-431-5428; E-mail webmaster@paintsquare.com