PaintSquare.com
      | Connect Follow us on Twitter Like us on Facebook
About | Subscribe | Advertise
  

 


A767 Standard Specification for Zinc-Coated (Galvanized) Steel Bars for Concrete Reinforcement

All Standards | ASTM Standards
Search Standards


Click to Purchase and Download this Standard or Test Method

Revision Date: August 24, 2009
Updated On: August 25, 2009
Editorial Change:
 
This specification covers steel reinforcing bars with protective zinc coatings applied by dipping the properly prepared reinforcing bars into a molten bath of zinc. Galvanization shall be used to prepare reinforcing bars. The galvanizer shall be permitted to subject the newly coated steel reinforcing bars to air or steam wiping to remove excess zinc from the bars. The mass of zinc coating shall conform to specified requirements. The mass of the coating shall be determined by magnetic thickness gage measurements. Stripping method, weighing before and after galvanizing, and microscopy method shall be used to referee the results obtained by magnetic thickness measurements. A retest shall be provided if the average zinc coating mass fails to meet the requirements. The galvanized coating shall be chromate treated.

1.1 This specification covers steel reinforcing bars with protective zinc coatings applied by dipping the properly prepared reinforcing bars into a molten bath of zinc.

(Back to all Standards)

 
   

Atlantic Design, Inc.
CLICK HERE

to see what we did to this dust collector! ADI can increase the efficiency and life of your equipment! Any brand, for less than new! 866.Call.ADI


Desco Mfg. Co., Inc.

Dust - Free Surface Prep
Made EASY!

Efficient-Fast clean/remove
Advanced Containment
Safe - Well Below OSHA
Yes! - Innovative Solutions!
DESCO Mfg.Co., Inc.
www.descomfg.com
800-337-2648


Covestro Deutschland
What keeps contractors one layer ahead when finishing their projects?

The answer: Pasquick®. Thanks to Pasquick®, one layer of coating is saved – resulting in faster workflows and earlier project finishing. Learn more.


Axxiom Manufacturing
Revolutionary Units

By integrating Schmidt's Aftercoolers with our blast pots, these systems remove moisture from air and minimize equipment footprint on jobsite.
Call 1-800-231-2085


Novetas Solutions
Number 1 Crushed Glass Abrasive in America!

Manufactured from 100% Recycled Glass.
NO Crystalline Silica,
Beryllium & Arsenic
Great White Metal Finish!
4 plants on Navy QPL
Call us at 866-775-6226


NLB Corporation
NLB Sure Shroud: Greater Protection and Flexibility

NLB’s Sure Shroud’s lighter weight and flexibility reduces operator fatigue and offers unmatched protection against high pressure hose ruptures. 10k to 40k psi rated.


Bullard

The Next Generation
of Blasting

• Lightest
• Coolest
• Most Comfortable
• Most Dependable


Clemco International GmbH
Global engineering-trusted solutions

For more than 70 years, Clemco has provided the highest quality blast equipment with a total commitment to comfort and safety.


DeFelsko Corporation
PosiTector Inspection Kits

PosiTector 6000 Coating Thickness Gage easily converts to a surface profile gage, dew point meter or ultrasonic wall thickness gage with a simple probe change


Modern Safety Techniques
Modern Safety Techniques

See our Low Temperature Catalyst for your CO removal needs. Help to provide your workers with safe, comfortable breathing air!

 
 
 
Technology Publishing

The Technology Publishing Network

The Journal of Protective Coatings & Linings (JPCL) PaintSquare
Durability + Design Paint BidTracker

 
EXPLORE:      JPCL   |   PaintSquare News   |   Interact   |   Buying Guides   |   Webinars   |   Resources   |   Classifieds
REGISTER AND SUBSCRIBE:      Free PaintSquare Registration   |   Subscribe to JPCL   |   Subscribe to PaintSquare News
MORE:      About PaintSquare.com   |   Privacy policy   |   Terms & conditions   |   Site Map   |   Search   |   Contact Us
 

© Copyright 2000-2016, Technology Publishing / PaintSquare, All rights reserved
2100 Wharton Street, Suite 310, Pittsburgh PA 15203-1951; Tel 1-412-431-8300; Fax 1-412-431-5428; E-mail webmaster@paintsquare.com