PaintSquare.com
      | Connect Follow us on Twitter Like us on Facebook
About | Subscribe | Advertise
  

 


D6886 Standard Test Method for Determination of the Individual Volatile Organic Compounds (VOCs) in Air-Dry Coatings by Gas Chromatography

All Standards | ASTM Standards
Search Standards


Click to Purchase and Download this Standard or Test Method

Revision Date: June 25, 2012
Updated On: October 01, 2012
Editorial Change:
 
In using Practice D3960 to measure the VOC content of waterborne coatings, precision tends to be poor for low VOC content air-dry coatings when the VOC weight fraction is determined indirectly. The present method first identifies and then quantifies the weight fraction of individual VOCs directly in air-dry coatings. The total VOC weight fraction can be obtained by adding the individual weight fraction values (Note 4).

Note 4—The present method may be used to speciate solvent-borne air-dry coatings. However, since these normally contain high, and often complex, quantities of solvent, precision tends to be better using the methods contained in Practice D3960, where the VOC fraction is determined by a direct weight loss determination.

SPME/GC makes it possible to identify very low levels of volatile compounds in a coating and could serve to make it possible to identify the presence of hazardous air pollutants (HAPs).

(Back to all Standards)

 
   

SEMicro Division, M.E. Taylor Engineering, Inc.
Coatings Adhesion Testers

The PATTI® accurately measures the bond strength between coating & substrate. Outfitted properly, the surface can be rough, porous, or curved & >10K psi strong!


HoldTight Solutions Inc.
NO FLASH RUST - NO CONTAMINANTS

Our HoldTight®102 salt remover & flash rust
preventer prevents flash
rust by removing surface contaminants. Contact us
for your nearest distributor.
(800) 319.8802 sales@holdtight.com


Clemco International GmbH
Global engineering-trusted solutions

For more than 70 years, Clemco has provided the highest quality blast equipment with a total commitment to comfort and safety.


Monti Tools, Inc.
BRISTLE BLASTER® - THE ORIGINAL ONE

Surface cleanliness of SSPC-10 | Anchor profile
up to 4.7 mils | Removes corrosion & coatings |
ATEX approved for zone 1
| www.monti.com | 832-623-7970


PPG Protective and Marine Coatings Group
Bringing innovation to the surface.™

PPG Protective & Marine Coatings is widely recognized as a world leader in protective and marine coatings, developing innovative, cutting-edge products and services.


Novatek Corporation
Novatek Corporation, Dustless Coatings Removal

Strip, clean and profile all dust free! Comply with new lead standards. Contact today: (866) 563-7800


DRYCO
Humidity & Temperature Control Equipment

Rental Desiccant Dehumidifiers, ArcticDRY Units, Air Conditioners, Heaters and Generators to help control the climate on your next industrial painting project. Nationwide locations, 24/7 service: (866) 379-2600 www.drycogroup.com”


Wasser High-Tech Coatings Inc.
Polyflex® Polyurea Linings

Polyflex ™ new Polyurea Geotextile Membrane System has been specifically engineered to protect the environment in containment applications.
www.polyflexlinings.com

 
 
 
Technology Publishing

The Technology Publishing Network

The Journal of Protective Coatings & Linings (JPCL) PaintSquare
Durability + Design Paint BidTracker

 
EXPLORE:      JPCL   |   PaintSquare News   |   Interact   |   Buying Guides   |   Webinars   |   Resources   |   Classifieds
REGISTER AND SUBSCRIBE:      Free PaintSquare Registration   |   Subscribe to JPCL   |   Subscribe to PaintSquare News
MORE:      About PaintSquare.com   |   Privacy policy   |   Terms & conditions   |   Site Map   |   Search   |   Contact Us
 

© Copyright 2000-2016, Technology Publishing / PaintSquare, All rights reserved
2100 Wharton Street, Suite 310, Pittsburgh PA 15203-1951; Tel 1-412-431-8300; Fax 1-412-431-5428; E-mail webmaster@paintsquare.com