| Connect Follow us on Twitter Like us on Facebook
About | Subscribe | Advertise


D3718 Standard Test Method for Low Concentrations of Chromium in Paint by Atomic Absorption Spectroscopy

All Standards | ASTM Standards
Search Standards

Click to Purchase and Download this Standard or Test Method

Revision Date: July 14, 2010
Updated On: July 22, 2010
Editorial Change:
The permissible level of heavy metals in certain coatings is specified by governmental regulatory agencies. This test method provides a fully documented procedure for determining low concentrations of chromium present in both water- and solvent-reducible coatings to determine compliance.

This test method covers the determination of the content of chromium (including chromium oxide) in the range between 0.005 and 1.0 % present in the solids of liquid coatings or in dried films obtained from previously coated substrates. There is no reason to believe that higher levels could not be determined by this test method, provided that appropriate dilutions and adjustments in specimen size and reagent quantities are made.

(Back to all Standards)


Atlantic Design, Inc.

The smallest version of our Blast Vacuum Recyclers, this ADI 2300CFM 2-Pot is a cleverly designed power package for those smaller jobs. 866.Call.ADI

KTA-Tator, Inc. - Corporate Office
Coatings Inspection

Any structure, any height, any place - A qualified coatings inspector is always available. Call 1-800-245-6379.

Waterjet Technology Association (WJTA)
Discover Waterjet from the Experts

Waterjet is an environmentally friendly and growing method of surface prep. Get the latest info and education at WJTA-IMCA
2015 – November 2-4,
New Orleans.

Safway Services
One Source. Every Solution.

The Safway Group is your source for multiservices. Painting, coating, insulation and more – all from the most trusted name in the industry.

Montipower, Inc.
The MBX Bristle Blaster

Get a 2.7 to 3.3 mil profile and a Near White Metal Clean. For info visit or call 877 629-8777


The Next Generation
of Blasting

• Lightest
• Coolest
• Most Comfortable
• Most Dependable

Commercial Sand Blasting & Painting Ltd.
Reliable Service & Superior Workmanship

We’re ready to meet any of your protective coating and lining needs. We can work on your site or in our facilities, with large shops (60,000 sq ft), 40 acres of yard space, and cranes and forklifts on site.

HoldTight Solutions Inc.

Our HoldTight®102 salt remover & flash rust preventer prevents flash
rust by removing surface contaminants. It has no equal; only wannabees.
Contact us for your
nearest distributor.
(800) 319.8802

Termarust Technologies
Termarust (HR CSA) Chemically Stops
Active Corrosion

Hydro Utility Penstock Overcoated in 1997. Was power washed and overcoated with major cost saving. No environmental impact with Termarust's low LC50 of 41,007 ppm.

Farrow System USA, Inc.
       SIMPLY the BEST
In Wet Abrasive Blasting

Automated controls simplify operation. 100lb. media capacity & enclosed water tank, for hours of continuous blasting. Dry weight of 350 lbs. & 150 psi capable.

Technology Publishing

The Technology Publishing Network

The Journal of Protective Coatings & Linings (JPCL) PaintSquare
Durability + Design Paint BidTracker

EXPLORE:      JPCL   |   PaintSquare News   |   Interact   |   Buying Guides   |   Webinars   |   Resources   |   Classifieds
REGISTER AND SUBSCRIBE:      Free PaintSquare Registration   |   Subscribe to JPCL   |   Subscribe to PaintSquare News
MORE:      About   |   Privacy policy   |   Terms & conditions   |   Site Map   |   Search   |   Contact Us

© Copyright 2000-2015, Technology Publishing / PaintSquare, All rights reserved
2100 Wharton Street, Suite 310, Pittsburgh PA 15203-1951; Tel 1-412-431-8300; Fax 1-412-431-5428; E-mail