PaintSquare.com
      | Connect Follow us on Twitter Like us on Facebook
About | Subscribe | Advertise
  

 


C907-12 Polyvinyl Chloride (PVC) Pressure Fittings for Water—4 In. Through 8 In. (100 mm Through 200 mm)

All Standards | AWWA Standards
Search Standards


Click to Purchase and Download this Standard or Test Method

Revision Date:
Updated On: October 22, 2013
Editorial Change:
 
This standard covers pressure class 150 polyvinyl chloride (PVC) injection-molded fittings with push-on rubber gasketed joints in nominal sizes 4 in., 6 in., and 8 in. The fittings are for use with PVC water distribution pipe having an outside diameter conforming to the dimensions of cast-iron pipe, and with dimension ratios of 18 or 25 as described in ANSI/AWWA C900, Standard for Polyvinyl Chloride (PVC) Pressure Pipe, 4 In. Through 12 In., for Water Distribution. Further design considerations are provided for guidance when the fittings will be used with PVC pressure pipes other than Class 150 and Class 100. Topics covered include: materials; fitting requirements; testing; pressure class of fittings; compatible application criteria; pressure class derating factors; and information of general interest to users of injection-molded PVC fittings (construction, safety factors, and causes of failure and their prevention).

(Back to all Standards)

 
   

DRYCO
DEHUMIDIFICATION FOR
ANY SIZE PROJECT!

Temporary climate control equipment. Dehumidifiers,
Heaters, A/C, Power, More…
Toll Free: 866-379-2600


Polyval Coatings
Polyflex® Polyurea Linings

Polyflex ™ new Polyurea Geotextile Membrane System has been specifically engineered to protect the environment in containment applications.
www.polyflexlinings.com


LPI Incorporated
LPI, Inc.

Manufactures air-powered man lifts for use in prep, paint and blast booths. Standard and custom designs.
Phone 800-657-6956 or www.lpi-inc.com


Blastox/The TDJ Group, Inc.
Blastox - One Step
Lead Abatement

Don't waste $$ on added labor steps with other methods. Don't mix, meter or apply at the job-site. Avoid strict hazardous waste rules.
Let your painters paint!


Abrasives Inc.
Check our Prices for Blast Abrasives

Faced with higher abrasive costs? We invite you to call & check our rates on Black Magic® coal slag and other quality blast materials. Abrasives Inc. 800-584-7524


Mitsubishi Gas Chemical America
Performance Amine 1,3-BAC

A highly reactive cycloaliphatic diamine offering superior performance. Reasonable cost and curing efficacy makes it suitable for all types of epoxy resin applications.


Wasser High-Tech Coatings Inc.
Wasser Coatings Protect

Wasser Coatings offer a complete range of Moisture Cure Urethane (NEPCOAT approved) systems in addition to Polyurea membranes and linings(NSF).
www.wassercoatings.com

 
 
 
Technology Publishing

The Technology Publishing Network

The Journal of Protective Coatings & Linings (JPCL) PaintSquare
Durability + Design Paint BidTracker

 
EXPLORE:      JPCL   |   PaintSquare News   |   Interact   |   Buying Guides   |   Webinars   |   Resources   |   Classifieds
REGISTER AND SUBSCRIBE:      Free PaintSquare Registration   |   Subscribe to JPCL   |   Subscribe to PaintSquare News
MORE:      About PaintSquare.com   |   Privacy policy   |   Terms & conditions   |   Site Map   |   Search   |   Contact Us
 

© Copyright 2000-2015, Technology Publishing / PaintSquare, All rights reserved
2100 Wharton Street, Suite 310, Pittsburgh PA 15203-1951; Tel 1-412-431-8300; Fax 1-412-431-5428; E-mail webmaster@paintsquare.com