PaintSquare.com
      | Connect Follow us on Twitter Like us on Facebook
About | Subscribe | Advertise
  

 


D5401 Standard Test Method for Evaluating Clear Water Repellent Coatings on Wood

All Standards | ASTM Standards
Search Standards


Click to Purchase and Download this Standard or Test Method

Revision Date: March 16, 2009
Updated On: April 10, 2009
Editorial Change:
 
Water is known to penetrate wood substrates, causing dimensional instability and eventual deterioration. Clear water repellent coatings are designed to protect wood from damaging effects of water. This test method is used to evaluate the effectiveness of water repellent coatings on wood soon after application or after long-term exterior exposure.

1.1 This test method evaluates the effectiveness of clear water repellent coatings on wood before or after exterior exposure.

1.2 Intralaboratory results with this test method can be used to compare the effectiveness of clear water repellent coatings. The agreement between results obtained in different laboratories may be less satisfactory unless a known water repellent is used as a reference.

1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.

1.4 This standard does not purport to address all of the safety problems, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

(Back to all Standards)

 
   

Montipower, Inc.
The MBX Bristle Blaster

Get a 2.7 to 3.3 mil profile and a Near White Metal Clean. For info visit www.mbxit.com or call 877 629-8777


Minerals Research & Recovery

HIGH PERFORMANCE ABRASIVES


“Made in the USA!”

Why recycle waste from other countries? Go FASTER, CLEANER, at 1/3 THE COST with MR&R “All-American” Sharpshot®HP!!

WATCH THE VIDEO


International Paint LLC

International Paint Engineered Coatings

Learn about our solutions for:
  • Structural Steel
  • Piping & Equipment
  • Storage Tanks
  • Pressure Vessels
  • Secondary Containment


    Axxiom Manufacturing
    Revolutionary Units

    By integrating Schmidt's Aftercoolers with our blast pots, these systems remove moisture from air and minimize equipment footprint on jobsite.
    Call 1-800-231-2085


    CHLOR*RID International Inc.
    Free Webinar

    Learn about soluble salts, along with a discussion on allowable levels.
    More information at
    www.chlor-rid.com,

    800-422-3217


    Dampney Co., Inc.
    Metal Patching Compound

    One Part / Ready to Use / High Temperature. Fill surface imperfections, voids, rough welds prior to painting and powder coating.


    Abrasives Inc.
    Check our Prices for Blast Abrasives

    Faced with higher abrasive costs? We invite you to call & check our rates on Black Magic® coal slag and other quality blast materials. Abrasives Inc. 800-584-7524

  •  
     
     
    Technology Publishing

    The Technology Publishing Network

    The Journal of Protective Coatings & Linings (JPCL) PaintSquare
    Durability + Design Paint BidTracker

     
    EXPLORE:      JPCL   |   PaintSquare News   |   Interact   |   Buying Guides   |   Webinars   |   Resources   |   Classifieds
    REGISTER AND SUBSCRIBE:      Free PaintSquare Registration   |   Subscribe to JPCL   |   Subscribe to PaintSquare News
    MORE:      About PaintSquare.com   |   Privacy policy   |   Terms & conditions   |   Site Map   |   Search   |   Contact Us
     

    © Copyright 2000-2015, Technology Publishing / PaintSquare, All rights reserved
    2100 Wharton Street, Suite 310, Pittsburgh PA 15203-1951; Tel 1-412-431-8300; Fax 1-412-431-5428; E-mail webmaster@paintsquare.com