PaintSquare.com
      | Connect Follow us on Twitter Like us on Facebook
About | Subscribe | Advertise
  

D7514 Standard Test Method for Evaluating Ink Stainblocking of Architectural Paint Systems by Visual Assessment

All Standards | ASTM Standards
Search Standards


Click to Purchase and Download this Standard or Test Method

Revision Date: February 19, 2014
Updated On: February 20, 2014
Editorial Change:
 
5.1 This standard may be used by paint companies and raw material suppliers to assess effectiveness of interior architectural primers for blocking stains from bleeding through to a topcoat.

5.2 In practice, different ink-stained substrates may give various results for stainblocking performance for a primer and topcoat system. As such, this test method may be used for a number of different ink-stained surfaces.

1.1 This standard provides a method for evaluating the ability of an architectural paint system to block ink stains from markers and writing instruments from bleeding through a primer into a topcoat.

1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

(Back to all Standards)

 
   

International Paint LLC

International Paint Engineered Coatings

Learn about our solutions for:
  • Structural Steel
  • Piping & Equipment
  • Storage Tanks
  • Pressure Vessels
  • Secondary Containment


    Modern Safety Techniques
    Modern Safety Techniques

    See our Low Temperature Catalyst for your CO removal needs. Help to provide your workers with safe, comfortable breathing air!


    Termarust Technologies
    Termarust (HR CSA) Chemically Stops
    Active Corrosion

    Pipeline Utility Aerial crossings coated since 1992. Termarust's (HR CSA) was used to overcoat lead paint and preserve cables, pipes and support towers.


    DeHumidification Technologies
    HUMIDITY PROBLEMS?

    DH Tech has the most innovative and reliable equipment available to
    control humidity efficiently
    and effectively.
    IT'S UNDER CONTROL!


    Clemco Industries Corp.
    Powerful Protection in a Small Package

    Mounts inside blast helmet, alerts operator to dangerous breathing-air condition by audible, visual, and vibratory alarms. Easily calibrated, battery operated.


    HoldTight Solutions Inc.
    NO FLASH RUST -
    NO CONTAMINANTS

    Our HoldTight®102 salt remover & flash rush inhibitor prevents flash rust by removing surface contaminants.
    Contact us for your nearest distributor. (800) 319.8802 sales@holdtight.com


    PreTox Products - NexTec, Inc.
    GOT LEAD? Specify Pretox System products

    The ONLY Lead Stabilizer Compatible with All Paint Removal Methods. Works with all Blast Media: Grits | Recyclable Abrasives | CO2 | Water | Power Tools | Etc. Call Dave Steffen at 800.338.8296.

  •  
     
     
    Technology Publishing

    The Technology Publishing Network

    The Journal of Protective Coatings & Linings (JPCL) PaintSquare
    Durability + Design Paint BidTracker

     
    EXPLORE:      JPCL   |   PaintSquare News   |   Interact   |   Buying Guides   |   Webinars   |   Resources   |   Classifieds
    REGISTER AND SUBSCRIBE:      Free PaintSquare Registration   |   Subscribe to JPCL   |   Subscribe to PaintSquare News
    MORE:      About PaintSquare.com   |   Privacy policy   |   Terms & conditions   |   Site Map   |   Search   |   Contact Us
     

    © Copyright 2000-2015, Technology Publishing / PaintSquare, All rights reserved
    2100 Wharton Street, Suite 310, Pittsburgh PA 15203-1951; Tel 1-412-431-8300; Fax 1-412-431-5428; E-mail webmaster@paintsquare.com