Click to Purchase and Download this Standard or Test Method
Revision Date:
Updated On: March 05, 2009
Editorial Change:
1.1 This standard covers procedures for establishing a monitoring program for condition assessment of Coating Service Level I coating systems in operating nuclear power plants. Monitoring is an ongoing process of evaluating the condition and performance of the in-service coating systems.
1.2 It is the intent of this standard to provide a recommended basis for establishing a coatings condition assessment program, not to mandate a singular basis for all programs. Variations or simplifications of the program described in this standard may be appropriate for each operating nuclear power plant depending on their licensing commitments. Similar guidelines are applicable for Coating Service Level III and other areas outside containment.
1.3 This standard does not address the requirements of ASME Section XI, In-Service Inspection Subsections IWE and IWL.
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
Our HoldTight®102 salt remover & flash rust preventer prevents flash
rust by removing surface contaminants. Contact us for your
nearest distributor.
(800) 319.8802 sales@holdtight.com
Sandblast additive delivered to jobsite pre-blended to eliminate hazardous abrasive wastes. Why mix, meter or apply at the job-site? Blast with ease and Let your painters paint!
1(800)-252-7869
ARC HT-S is a 100% solids glass/ceramic reinforced novolac epoxy lining for high temperature aqueous cold wall corrosion conditions. ARC HT-S is easily applied by roller, brush, squeegee, or airless spray.
Mesh-free passive fire protection epoxy designed to protect against hydrocarbon pool fire scenarios for up to four hours as defined in the ANSI/UL1709 standard.
Novatek Corporation,
Dustless Coatings Removal
Strip, clean and profile all dust free!
Comply with new lead standards.
Contact today: (866) 563-7800
www.Novatekco.com
Technology Publishing Co., 1501 Reedsdale Street, Suite 2008, Pittsburgh, PA 15233