PaintSquare.com
Follow us on Twitter Follow us on LinkedIn Like us on Facebook Follow us on Instagram Visit the TPC Store
Search the site

 


D5179 Standard Test Method for Measuring Adhesion of Organic Coatings to Plastic Substrates by Direct Tensile Testing

All Standards | ASTM Standards
Search Standards


Click to Purchase and Download this Standard or Test Method

Revision Date:
Updated On: October 24, 2008
Editorial Change:
 
1.1 This test method covers the laboratory determination of organic coating adhesion to plastic substrates by mounting and removing an aluminum stud from the surface of the coating and measuring the force required to break the coating/substrate bond with a tensile tester.

1.2 This test method requires that the aluminum stud be adhered directly to the surface of a coated, cured panel (Fig. 1).

1.3 This test method is used to compare the adhesion of coatings to various plastic substrates, thus allowing for a quantitative comparison of various coating/substrate combinations.

1.4 Other tensile test methods are Test Method D 4541 and ISO 4624 (but are not technically equivalent).

1.5 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.

1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

(Back to all Standards)

 
   
Advertisements
 
Termarust Technologies
 
Termarust (HR CSA) Chemically Stops
Active Corrosion
 
Arch truss treated with Termarust's (HR CSA) in 2003. This steel arch bridge is rust free on all surfaces including the crevice corroded joints and connections.
 

 
KTA-Tator, Inc. - Corporate Office
 
KTA-TATOR LABORATORY SERVICES
 
• Coating failure analysis
• Independent testing
• Accelerated weathering testing
• Abrasives Testing
• Oil & Gas Material Qualification
• A2LA Certificate #2455.01
Contact: Rob Leggat
at 412-788-1300 x176
 

 
Monti Tools, Inc.
 
BRISTLE BLASTER® – THE ORIGINAL ONE
 
  • Abrasive blast with a power tool
  • Remove corrosion, mill scale and coatings
  • Cleans & roughens
  • Meets SSPC-SP 10 / NACE No. 2
  • Profile up to 4.7 mils
  • ATEX Zone 1
  •  

     
    BASF
     
    New resins from BASF will have metals loving water!
     
    Excellent corrosion resistance, low VOC, high gloss, thin films www.basf.us/industrialcoatings dpsolutions@basf.com 800-231-7868
     

     
    Sherwin-Williams
     
    Sherwin-Williams Protective & Marine Coatings
     
    With 4,000 distribution points and 3,700+ years of combined experience, Sherwin-Williams delivers the products, support and expertise you need, right where you need it.
     

     
    Abrasives Inc.
     
    Need more MAGIC around?
     
    Black Magic® is a premier solution for abrasive blast media. Stop by our new website & find out how you can get more Magic. www.AbrasivesInc.com 800-584-7524
     

     
    Mitsubishi Gas Chemical America
     
    Performance Amine 1,3-BAC
     
    A highly reactive cycloaliphatic diamine offering superior performance. Reasonable cost and curing efficacy makes it suitable for all types of epoxy resin applications.
     

     
    DeFelsko Corporation
     
    PosiTest LPD Low voltage Pinhole Detector
     
    Uses a wet sponge to detect holidays, pinholes and other discontinuities on metal and concrete substrates. Easy to use ergonomic design and 4 voltage outputs.
     

     
    CHLOR*RID International Inc.
     
    SOLUTIONS THAT WORK
     
    Companies that invest in corrosion control use CHLOR RID products
    • Soluble salt removal liquid
    • Test kits to verify contamination levels
    • Surface passivation to hold the blast
    INFO@CHLOR-RID.COM 800.422.3217
     

     
    Harsco
     
    BLACK BEAUTY® GLASS
     
    A 100% post-consumer bottle glass abrasive from a company you can trust. Toll Free: 1-888-733-3646
     

     
     
     

    Technology Publishing Co., 1501 Reedsdale Street, Suite 2008, Pittsburgh, PA 15233

    TEL 1-412-431-8300  • FAX  1-412-431-5428  •  EMAIL webmaster@paintsquare.com


    The Technology Publishing Network

    Durability + Design PaintSquare the Journal of Protective Coatings & Linings Paint BidTracker

     
    EXPLORE:      JPCL   |   PaintSquare News   |   Interact   |   Buying Guides   |   Webinars   |   Resources   |   Classifieds
    REGISTER AND SUBSCRIBE:      Free PaintSquare Registration   |   Subscribe to JPCL   |   Subscribe to PaintSquare News
    MORE:      About PaintSquare.com   |   Privacy policy   |   Terms & conditions   |   Site Map   |   Search   |   Contact Us