PaintSquare.com


The First Word in Protective & Marine Coatings

A Product of Technology Publishing / PaintSquare
JPCL | PaintSquare News | Durability + Design | Paint BidTracker


C602-11 Cement-Mortar Lining of Water Pipelines in Place—4 In. (100 mm) and Larger

All Standards | AWWA Standards
Search Standards


Click to Purchase and Download this Standard or Test Method

Revision Date:
Updated On: October 22, 2013
Editorial Change:
 
This standard covers the requirements for the materials and application of a cement-mortar lining to the inside surface of 4-in. (100-mm) and larger new and old steel, ductile-iron, and cast-iron water pipelines that have been previously installed, as well as related work. The application requirements are: that the lining of all straight pipe sections and long radius bends shall be accomplished by a machine that progresses uniformly through the pipe, applies cement mortar against the pipe surfaces, and is provided with an attachment for mechanically troweling the mortar to obtain a smooth lining of uniform thickness with smooth transitions over joints; and that the lining of bends, specials, and areas adjacent to valves shall be machine sprayed and hand troweled or, where machine placement is impractical, shall be performed manually. The purpose of this standard is to define the minimum requirements for cement-mortar lining of water pipelines, 4 in. (100 mm) and larger, in place, including materials, design, and methods for construction. The major revisions in this editions of ANSI/AWWA C602-95 include the following: the format has been changed to AWWA standard style; the title of the standard has been revised; definitions (Sec. 3) have been revised; Sec. 5.2.1 (old Sec. 5.1) and Sec. 5.3.1 (old Sec. 9.1) have been revised; and, Table 1 on recommended thicknesses of cement-mortar linings has been revised.

(Back to all Standards)

 
   

DRYCO
DEHUMIDIFICATION FOR
ANY SIZE PROJECT!

Temporary climate control equipment. Dehumidifiers,
Heaters, A/C, Power, More…
Toll Free: 866-379-2600


Denso North America Inc.
Denso Protal Liquid Coatings

A full range of fast cure, high build epoxies for a variety of above and below ground corrosion protection.
Call 1-281-821-3355 or Visit densona.com


Blastox/The TDJ Group, Inc.
Blastox - One Step
Lead Abatement

Don't waste $$ on added labor steps with other methods. Don't mix, meter or apply at the job-site. Avoid strict hazardous waste rules.
Let your painters paint!


Abrasives Inc.
Check our Prices for Blast Abrasives

Faced with higher abrasive costs? We invite you to call & check our rates on Black Magic® coal slag and other quality blast materials. Abrasives Inc. 800-584-7524


Polyval Coatings
POLYFLEX brand Polyurea

high chemical resistant membranes are used extensively to protect our environment in secondary containment applications.


International Paint LLC
A Long Track Record of Success

  • Polyurethanes
  • Linings
  • Epoxies
  • Zincs
The Power to Protect™
1-800-589-1267


Van Air Systems
The Blast Pak

Van Air Systems' portable desiccant air dryer. Get dry compressed air with this All-In-One blasting and coating solution.

 
 
 
Technology Publishing

The Technology Publishing Network

The Journal of Protective Coatings & Linings (JPCL) PaintSquare
Durability + Design Paint BidTracker JPCL Europe

 
EXPLORE:      JPCL   |   PaintSquare News   |   Interact   |   Buying Guides   |   Webinars   |   Resources   |   Classifieds
REGISTER AND SUBSCRIBE:      Free PaintSquare Registration   |   Subscribe to JPCL   |   Subscribe to PaintSquare News
MORE:      About PaintSquare.com   |   Privacy policy   |   Terms & conditions   |   Site Map   |   Search   |   Contact Us
 

© Copyright 2000-2014, Technology Publishing / PaintSquare, All rights reserved
2100 Wharton Street, Suite 310, Pittsburgh PA 15203-1951; Tel 1-412-431-8300; Fax 1-412-431-5428; E-mail webmaster@paintsquare.com