PaintSquare.com
      | Connect Follow us on Twitter Like us on Facebook
About | Subscribe | Advertise
  

 


TM0108-2012 TM0108-2012 Testing of Catalyzed Titanium Anodes for Use in Soils or Natural Waters

All Standards | NACE Standards
Search Standards


Click to Purchase and Download this Standard or Test Method

Revision Date: August 16, 2012
Updated On: October 01, 2012
Editorial Change:
 
This test method is intended to provide an indication of an anode’s ability to perform satisfactorily for a specific number of years. Because such anodes can fail with little or no weight loss, lifetime expectation cannot be extrapolated from operation at normal operating current density, and testing must be conducted at high current density until an acceptable amount of charge has been accumulated. This standard is applicable for catalyzed titanium anodes intended for use in underground or underwater environments, and it is intended for use by consultants, suppliers, and end users of catalyzed titanium CP anodes.

(Back to all Standards)

 
   

Julbert, Inc.
Built from the ground up.

Dust Collectors Available!
We deliver to your Jobsite!
Built Tough! Priced Right!
PH: 208-437-2100 customerservice@julbertinc.com


KTA-Tator, Inc. - Corporate Office
KTA Analyzes
Coating Failures

• Field Diagnosis
• Lab Diagnosis
• Determination of Cause
• Recommendations
www.kta.com
800-245-6379


Atlas Material Testing Technology

Helping You Put Your Products To The Test

• Outdoor Accelerated
Weathering
• Laboratory Testing
Services
• Accelerated Weathering
Instruments

www.atlas-mts.com atlas.info@ametek.com


IBIX North America
Portable Powder Coating System

All-in-one skid mounted system for on-site repairs. Durable coating for industrial, structural steel, pipeline and marine applications. 727-322-4611


DeFelsko Corporation
PosiTest Automatic Adhesion Tester

Electronically controlled hydraulic pump applies smooth and continuous pull-off pressure at user selectable rates. No twisting, pumping or cranking.


AGC Chemicals
LUMIFLON®FEVE Resin Used On Vibrant Red Bridge

LUMIFLON based coatings can last up to 30 years without fading, offering a low-maintenance solution that retains color and gloss and can be field-applied.


Waterjet Technology Association (WJTA)
Automation brings new degree of safety

See new advances in automated/handheld waterjet tools for safe & productive surface prep/anti-corrosion applications at the WJTA-IMCA Conf/Expo, Nov. 2-4, 2015


HoldTight Solutions Inc.
NO FLASH RUST -
NO CONTAMINANTS

Our HoldTight®102 salt remover & flash rust preventer prevents flash
rust by removing surface contaminants. It has no equal; only wannabees.
Contact us for your
nearest distributor.
(800) 319.8802 sales@holdtight.com


Midsun Specialty Products
Stopaq 30+ Year Coatings

Use Stopaq corrosion prevention coatings on pipelines, field joints, tank chimes, structural steel and more. Learn more at www.midsunsp.com/stopaq


Blastox/The TDJ Group, Inc.
Blastox - One Step
Lead Abatement

Don't waste money on added labor steps with other methods. Don't mix, meter or apply at the job-site. Avoid strict hazardous waste rules.
Let your painters paint

 
 
 
Technology Publishing

The Technology Publishing Network

The Journal of Protective Coatings & Linings (JPCL) PaintSquare
Durability + Design Paint BidTracker

 
EXPLORE:      JPCL   |   PaintSquare News   |   Interact   |   Buying Guides   |   Webinars   |   Resources   |   Classifieds
REGISTER AND SUBSCRIBE:      Free PaintSquare Registration   |   Subscribe to JPCL   |   Subscribe to PaintSquare News
MORE:      About PaintSquare.com   |   Privacy policy   |   Terms & conditions   |   Site Map   |   Search   |   Contact Us
 

© Copyright 2000-2015, Technology Publishing / PaintSquare, All rights reserved
2100 Wharton Street, Suite 310, Pittsburgh PA 15203-1951; Tel 1-412-431-8300; Fax 1-412-431-5428; E-mail webmaster@paintsquare.com