| Connect Follow us on Twitter Like us on Facebook
About | Subscribe | Advertise


D5064 Standard Practice for Conducting a Patch Test to Assess Coating Compatibility

All Standards | ASTM Standards
Search Standards

Click to Purchase and Download this Standard or Test Method

Revision Date: August 09, 2012
Updated On: October 01, 2012
Editorial Change:
1.1 This practice covers the procedures for testing coating compatibility when maintenance of an in-place coating system is being contemplated. It does not cover procedures for assessing the integrity of the existing coating to determine if it can be repainted, nor does it establish the compatibility of the maintenance coating system with the substrate or corrosion products. The practice is intended for use in the field.

Note 1 - Pass-Fail Criteria (for example, adhesion requirements) are not established by this practice. These should be established by the user or specifier with input from the supplier.

1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.

This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

(Back to all Standards)



The Next Generation
of Blasting

• Lightest
• Coolest
• Most Comfortable
• Most Dependable

CS Unitec
Peening Preparation Tools

CS Unitec’s hand-held scarifiers are an ideal alternative to small-area shot blasting for cleaning and preparing concrete & metal surfaces.

Sherwin-Williams Protective & Marine Coatings

With 4,000 distribution points and 3,700+ years of experience, Sherwin-Williams delivers the products, support and expertise you need, right where you need it.

Avalotis Corporation
Choose experience. Choose quality. Choose safety.

Avalotis Corporation has been meeting and exceeding clients’ specifications and expectations for almost 50 years. The first name in painting and protective coatings: Avalotis.

SAFE Systems, Inc.
Enduroguard -
The Tough Cable
for a Tough Industry.

Reduce maintenance costs and down time, increase job site safety with Enduroguard Cable. Available exclusively from SAFE Systems. UL listed, flexible, abrasion resistant and cut resistant.

Ethox Chemicals LLC
Ethoflex® ER instantly upgrades your epoxy!

The only epoxy additive that improves flexibility, corrosion resistance, toughness, and adhesion, without hurting pot life, cure time, or increasing VOCs.

Novetas Solutions
Number 1 Crushed Glass Abrasive in America!

6 NEW plants coast to coast! Safe for environment, 100% recycled glass. White Metal Finish! No unsafe toxins like Beryllium & Arsenic!
Call 866-775-6226

HoldTight Solutions Inc.

Our HoldTight®102 salt remover & flash rust preventer prevents flash
rust by removing surface contaminants. It has no equal; only wannabees.
Contact us for your
nearest distributor.
(800) 319.8802

Termarust Technologies
Termarust (HR CSA) Chemically Stops
Active Corrosion

Hydro Utility Penstock Overcoated in 1997. Was power washed and overcoated with major cost saving. No environmental impact with Termarust's low LC50 of 41,007 ppm.

NLB Corporation
Water jet surface prep, high or low

See how quickly HydroPrep® tools do surface prep, with no containment needed. Choose automated Crawler for overhead, Vortex™ for floors, or handheld VertaJet™.

Technology Publishing

The Technology Publishing Network

The Journal of Protective Coatings & Linings (JPCL) PaintSquare
Durability + Design Paint BidTracker

EXPLORE:      JPCL   |   PaintSquare News   |   Interact   |   Buying Guides   |   Webinars   |   Resources   |   Classifieds
REGISTER AND SUBSCRIBE:      Free PaintSquare Registration   |   Subscribe to JPCL   |   Subscribe to PaintSquare News
MORE:      About   |   Privacy policy   |   Terms & conditions   |   Site Map   |   Search   |   Contact Us

© Copyright 2000-2015, Technology Publishing / PaintSquare, All rights reserved
2100 Wharton Street, Suite 310, Pittsburgh PA 15203-1951; Tel 1-412-431-8300; Fax 1-412-431-5428; E-mail