Click to Purchase and Download this Standard or Test Method
Revision Date:
Updated On: January 16, 2007
Editorial Change:
1.1 This guide covers key issues to be considered when examining metallic failures when corrosion is suspected as either a major or minor causative factor.
1.2 Corrosion-related failures could include one or more of the following: change in surface appearance (for example, tarnish, rust, color change), pin hole leak, catastrophic structural failure (for example, collapse, explosive rupture, implosive rupture, cracking), weld failure, loss of electrical continuity, and loss of functionality (for example, seizure, galling, spalling, swelling).
1.3 Issues covered include overall failure site conditions, operating conditions at the time of failure, history of equipment and its operation, corrosion product sampling, environmental sampling, metallurgical and electrochemical factors, morphology (mode) or failure, and by considering the preceding, deducing the cause(s) of corrosion failure.
This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
Nation Wide Equipment Rentals
Rapid Prep, LLC is a full service provider of sandblasting & all other surface preparation equipment, with 60 years of experience within the industrial painting industry.
GMA Garnet™ Natural Abrasives
- Superior cleaning performance
- Even Profile
- Low Dust
- Cost-Effective
- Environmentally friendly
- Recyclable up to 5 times
Tel : +1 832 243 9300
See the difference immediately Black Magic®
Quality blast abrasive goes farther.
Use Black Magic® The Tough Stuff
coal slag. Cleaner, consistent, less dust.
Order yours today! Abrasives Inc. 800-584-7524
U.S. Zinc helps the world work – the
proven corrosion protection properties
of our zinc dust prolong the life of
marine coatings.
Dustless Coatings Removal
Strip it, clean it, and profile it, all dust free! High production rates and Blast like finishes. Comply with new lead standards.
From Detection to Correction
Corrosion Probe, Inc. has the Most Concrete Coatings Experience and Expertise. Contact us today at
860-767-4402, www.cpiengineering.com
Denso SeaShield Marine Systems
A full range of steel, concrete and timber pile rehabilitation systems including petrolatum systems, fiberglass jackets, epoxy grouts and many other product lines. Call 1-281-821-3355 or Visit densona.com
Follow us on Twitter
Join us on Facebook
