PaintSquare.com
      | Connect Follow us on Twitter Like us on Facebook
About | Subscribe | Advertise
  

 


TM0105-2005 Test Procedures for Organic-Based Conductive Coating Anodes for Use on Concrete Structures

All Standards | NACE Standards
Search Standards


Click to Purchase and Download this Standard or Test Method

Revision Date:
Updated On: August 08, 2012
Editorial Change:
 
New in 2005. Evaluates the performance characteristics of organic-based conductive coating anode materials applied to steel-reinforced concrete surfaces for the purpose of supplying cathodic protection current to the embedded steel. Provides methods to test the durability of the organic conductive coating anode under defined laboratory conditions, i.e., conditions present when current discharges from the anode as it would in a working cathodic protection system. Tests consist of resistivity, adhesion, coating appearance, anode life, and water vapor permeation tests. Key words: adhesion, cathodic protection, coating appearance, coating application, electrochemical test, organic-based conductive coating, resistivity, test panel, water vapor permeation.

(Back to all Standards)

 
   

Termarust Technologies
Termarust (HR CSA) Chemically Stops
Active Corrosion

Truss bridge treated with Termarust's (HR CSA) in 1995. This highway & rail truss bridge is still stable and there still is no active corrosion.


BASF
New resins from BASF will have metals loving water:

Excellent corrosion resistance, low VOC, high gloss, thin films basf.us/industrialcoatings
polyorders@basf.com
800-231-7868


NLB Corporation
VacLance cleans up as you do surface preparation

Add vacuum recovery to any NLB rotating water jet lance with a VacLance attachment and vacuum source. Model DM32283 works vertically, horizontally and in corners.


Armakleen Company, The
ARMEX when nondestructive cleaning is critical

When substrates cannot be damaged ARMEX is the only choice for blast media. ARMEX is a USDA approved A-1 cleaner available in eleven formulations.


Dampney Co., Inc.
Rubber In a can!

Rubberized Spray in a
Handy Aerosol Can

• Stays flexible
• Seals off moisture penetration
• Non sagging formulation
• Will not crack, chip or peel
• Apply to wet and dry surfaces
• Paintable


Polyval Coatings
Polyflex® Polyurea Linings

Polyflex™ new Polyurea Geotextile Membrane System has been specifically engineered to protect the environment in containment applications.
www.polyflexlinings.com


International Bridge Conference
International Bridge Conference

Save the dates to attend the 2015 IBC. Four full days of educational sessions and 150 exhibits all in the City of Bridges. Click here for more information.


Blastox/The TDJ Group, Inc.
Blastox - One Step
Lead Abatement

Don't waste $$ on added labor steps with other methods. Don't mix, meter or apply at the job-site. Avoid strict hazardous waste rules.
Let your painters paint!


HoldTight Solutions Inc.
NO FLASH RUST -
NO CONTAMINANTS

Our HoldTight®102 salt remover & flash rush inhibitor prevents flash rust by removing surface contaminants.
Contact us for your nearest distributor. (800) 319.8802 sales@holdtight.com

 
 
 
Technology Publishing

The Technology Publishing Network

The Journal of Protective Coatings & Linings (JPCL) PaintSquare
Durability + Design Paint BidTracker

 
EXPLORE:      JPCL   |   PaintSquare News   |   Interact   |   Buying Guides   |   Webinars   |   Resources   |   Classifieds
REGISTER AND SUBSCRIBE:      Free PaintSquare Registration   |   Subscribe to JPCL   |   Subscribe to PaintSquare News
MORE:      About PaintSquare.com   |   Privacy policy   |   Terms & conditions   |   Site Map   |   Search   |   Contact Us
 

© Copyright 2000-2015, Technology Publishing / PaintSquare, All rights reserved
2100 Wharton Street, Suite 310, Pittsburgh PA 15203-1951; Tel 1-412-431-8300; Fax 1-412-431-5428; E-mail webmaster@paintsquare.com