PaintSquare.com


The First Word in Protective & Marine Coatings

A Product of Technology Publishing / PaintSquare
JPCL | PaintSquare News | Durability + Design | Paint BidTracker

ISO (443)

Search Standards | Back to all Standards

Metallurgy (38)

- Corrosion tests in artificial atmosphere at very low concentrations of polluting gas(es)

- Corrosion of metals and alloys -- Aqueous corrosion testing of zirconium alloys for use in nuclear power reactors

- ISO 10270:1995/Cor 1:1997

- ISO 11130:2010 Corrosion of metals and alloys -- Alternate immersion test in salt solution

- ISO 11306:1998 Corrosion of metals and alloys -- Guidelines for exposing and evaluating metals and alloys in surface sea water

- ISO 11463:1995 Corrosion of metals and alloys -- Evaluation of pitting corrosion

- ISO 11474:1998 Corrosion of metals and alloys -- Corrosion tests in artificial atmosphere -- Accelerated outdoor test by intermittent spraying of a salt solution (Scab test)

- ISO 11782-1:1998 Corrosion of metals and alloys -- Corrosion fatigue testing -- Part 1: Cycles to failure testing

- ISO 11782-2:1998 Corrosion of metals and alloys -- Corrosion fatigue testing -- Part 2: Crack propagation testing using precracked specimens

- ISO 11845:1995 Corrosion of metals and alloys -- General principles for corrosion testing

- ISO 11846:1995 Corrosion of metals and alloys -- Determination of resistance to intergranular corrosion of solution heat-treatable aluminium alloys

- ISO 11881:1999 Corrosion of metals and alloys -- Exfoliation corrosion testing of aluminium alloys

- ISO 11881:1999/Cor 1:1999

- ISO 14993:2001 Corrosion of metals and alloys -- Accelerated testing involving cyclic exposure to salt mist, "dry" and "wet" conditions

- ISO 15324:2000 Corrosion of metals and alloys -- Evaluation of stress corrosion cracking by the drop evaporation test

- ISO 3651-1:1998 Determination of resistance to intergranular corrosion of stainless steels -- Part 1: Austenitic and ferritic-austenitic (duplex) stainless steels -- Corrosion test in nitric acid medium by measurement of loss in mass (Huey test)

- ISO 3651-2:1998 Determination of resistance to intergranular corrosion of stainless steels -- Part 2: Ferritic,austenitic and ferritic-austenitic (duplex) stainless steels -- Corrosion test in media containing sulfuric acid

- ISO 6509:1981 Corrosion of metals and alloys -- Determination of dezincification resistance of brass

- ISO 6957:1988 Copper alloys -- Ammonia test for stress corrosion resistance

- ISO 7384:1986 Corrosion tests in artificial atmosphere -- General requirements

- ISO 7441:1984 Corrosion of metals and alloys -- Determination of bimetallic corrosion in outdoor exposure corrosion tests

- ISO 7539-1:1987 Corrosion of metals and alloys -- Stress corrosion testing -- Part 1: General guidance on testing procedures

- ISO 7539-2:1989 Corrosion of metals and alloys -- Stress corrosion testing -- Part 2: Preparation and use of bent-beam specimens

- ISO 7539-3:1989 Corrosion of metals and alloys -- Stress corrosion testing -- Part 3: Preparation and use of U-bend specimens

- ISO 7539-4:1989 Corrosion of metals and alloys -- Stress corrosion testing -- Part 4: Preparation and use of uniaxially loaded tension specimens

- ISO 7539-5:1989 Corrosion of metals and alloys -- Stress corrosion testing -- Part 5: Preparation and use of C-ring specimens

- ISO 7539-8:2000 Corrosion of metals and alloys -- Stress corrosion testing -- Part 8: Preparation and use of specimens to evaluate weldments

- ISO 8044:1999 Corrosion of metals and alloys -- Basic terms and definitions

- ISO 8407:2009 Corrosion of metals and alloys -- Removal of corrosion products from corrosion test specimens

- ISO 8565:2011 Metals and alloys -- Atmospheric corrosion testing -- General requirements for field tests

- ISO 8993:2010 Anodized aluminium and aluminium alloys -- Rating system for the evaluation of pitting corrosion -- Chart method

- ISO 8994:2011 Anodized aluminium and aluminium alloys -- Rating system for the evaluation of pitting corrosion -- Grid method

- ISO 9223:2012 Corrosion of metals and alloys -- Corrosivity of atmospheres -- Classification

- ISO 9224:2012 Corrosion of metals and alloys -- Corrosivity of atmospheres -- Guiding values for the corrosivity categories

- ISO 9225:2012 Corrosion of metals and alloys -- Corrosivity of atmospheres -- Measurement of pollution

- ISO 9226:2012 Corrosion of metals and alloys -- Corrosivity of atmospheres -- Determination of corrosion rate of standard specimens for the evaluation of corrosivity

- ISO 9400:1990 Nickel-based alloys -- Determination of resistance to intergranular corrosion

- ISO 9591:2004 Corrosion of aluminium alloys -- Determination of resistance to stress corrosion cracking

(Back to all Standards)
 
   

Empire Scaffold
Work with a scaffold company you can trust
Empire Scaffold is a full-service scaffold company providing specialized, on-site support for the life of the project, with products & experience to keep your projects up & running, safely.

TruQC, LLC
Click here to start your free trial
TruQC is cloud-based job-site documentation built for the iPad. It's easy-to-use, objective and complies to common industry standards. Learn more: TruQCApp.com.

ElektroPhysik
High-precision coating thickness gauge MiniTest 7400
MiniTest 7400 with intuitive menu control, enhanced data management with configuration assistent. Wear-resistant sensors for measuring tasks up to 35mm thickness.

Wasser High-Tech Coatings Inc.
Wasser Coatings
have been used to protect some of the most important bridges in the country; learn about our NEPCOAT-approved system as well as our entire range of MCU coatings and Polyurea membranes.

EnTech Industries, Inc.
EnTech Dust Collectors in Stock & Ready to Ship
2,000 cfm to 80,000 cfm Units
Diesel * Electric * Bi-Powered
* Mobile Trailer Mounted
* Custom Designs and Colors
Find a Dealer near You
Call 1-800-733-5384

Greenhorne & O'Mara, Inc.
One Team. Infinite Solutions.
Greenhorne & O’Mara is now Stantec. Contact us for coatings and corrosion consulting, design, analysis, and inspection services at john.woods@stantec.com.

Fox Industries Inc.
Repair, Protect & Strengthen
Need a coating? Turn to Fox. We have solutions to repair, protect and strengthen concrete, steel and wood substrates. Call 888-760-0369 or email info@foxind.com

 
 
 
Technology Publishing

The Technology Publishing Network

The Journal of Protective Coatings & Linings (JPCL) PaintSquare
Durability + Design Paint BidTracker JPCL Europe
 
EXPLORE:      JPCL   |   PaintSquare News   |   Interact   |   Buying Guides   |   Webinars   |   Resources   |   Classifieds
REGISTER AND SUBSCRIBE:      Free PaintSquare Registration   |   Subscribe to JPCL   |   Subscribe to PaintSquare News
MORE:      About PaintSquare.com   |   Privacy policy   |   Terms & conditions   |   Site Map   |   Search   |   Contact Us
 

© Copyright 2000-2013, Technology Publishing / PaintSquare, All rights reserved
2100 Wharton Street, Suite 310, Pittsburgh PA 15203-1951; Tel 1-412-431-8300; Fax 1-412-431-5428; E-mail webmaster@paintsquare.com