PaintSquare.com


The First Word in Protective & Marine Coatings

A Product of Technology Publishing / PaintSquare
JPCL | PaintSquare News | Durability + Design | Paint BidTracker


NACE (134)

Search Standards | Back to all Standards


Recommended Practices (90)

- NACE No. 1/SSPC-SP 5 White Metal Blast Cleaning

- NACE No. 10/SSPC-PA 6 Fiberglass-Reinforced Plastic (FRP) Linings Applied to Bottoms of Carbon Steel Aboveground Storage Tanks

- NACE No. 11/SSPC-PA 8 Thin-Film Organic Linings Applied in New Carbon Steel Process Vessels

- NACE No. 12/AWS C2.23M/SSPC-CS 23.00 Specification for the Application of Thermal Spray Coatings (Metallizing) of Aluminum, Zinc, and Their Alloys and Composites for the Corrosion Protection of Steel

- NACE No. 13/SSPC-ASC-1 Industrial Coating and Lining Application Specialist Qualification and Certification

- NACE No. 2/SSPC-SP 10 Near-White Metal Blast Cleaning

- NACE No. 3/SSPC-SP 6 Commercial Blast Cleaning

- NACE No. 4/SSPC-SP 7 Brush-Off Blast Cleaning

- NACE No. 6/SSPC-SP 13 Surface Preparation of Concrete

- NACE No. 8/SSPC-SP 14 Industrial Blast Cleaning

- RP0170-2004 Protection of Austenitic Stainless Steels and Other Austenitic Alloys from Polythionic Acid Stress Corrosion Cracking During Shutdown of Refinery Equipment

- RP0189-2002 On-Line Monitoring of Cooling Waters

- RP0193-2001 External Cathodic Protection of On-Grade Carbon Steel Storage Tank Bottoms

- Method for Conducting Coating (Paint) Panel Evaluation Testing in Atmospheric Exposures

- RP0287-2002 Field Measurement of Surface Profile of Abrasive Blast Cleaned Steel Surfaces Using a Replica Tape

- Care, Handling, and Installation of Internally Plastic-Coated Oilfield Tubular Goods and Accessories

- RP0292-2003 Installation of Thin Metallic Wallpaper Lining in Air Pollution Control and Other Process Equipment

- RP0297-2004 Maintenance Painting of Electrical Substation Apparatus Including Flow Coating of Transformer Radiators

- RP0303-2003 Field-Applied Heat-Shrinkable Sleeves for Pipelines: Application, Performance, and Quality Control

- RP0304-2004 Design, Installation, and Operation of Thermoplastic Liners for Oilfield Pipelines

- Field-Applied Underground Wax Coating Systems for Underground Pipelines: Application, Performance, and Quality Control

- RP0391-2001 Materials for the Handling and Storage of Concentrated (90 to 100%) Sulfuric Acid at Ambient Temperatures

- RP0394-2002 Application, Performance, and Quality Control of Plant-Applied, Fusion-Bonded Epoxy External Pipe Coating

- RP0395-99 Fusion-Bonded Epoxy Coating of Steel Reinforcing Bars

- RP0399-2004 Plant-Applied, External Coal Tar Enamel Pipe Coating Systems: Application, Performance, and Quality Control

- RP0402-2002 Field-Applied Fusion-Bonded Epoxy (FBE) Pipe Coating Systems for Girth Weld Joints: Application, Performance, and Quality Control

- RP0495-2003 Guidelines for Qualifying Personnel as Abrasive Blasters and Coating and Lining Applicators in the Rail Industries

- RP0602-2002 Field-Applied Coal Tar Enamel Pipe Coating Systems: Application, Performance, and Quality Control

- RP0692-2003 Application of a Coating System to Exterior Surfaces of Steel Rail Cars

- Preparation, Installation, Analysis, and Interpretation of Corrosion Coupons in Oilfield Operations

- Cathodic Protection of Prestressed Concrete Cylinder Pipelines

- SP0102-2010 In-Line Inspection of Pipelines

- Control of Internal Corrosion in Steel Pipelines and Piping Systems

- Corrosion Control of Offshore Structures by Protective Coatings

- SP0109-2009, Field Application of Bonded Tape Coatings for External Repair, Rehabilitation, and Weld Joints on Buried Metal Pipelines

- SP0110-2010 Wet Gas Internal Corrosion Direct Assessment Methodology for Pipelines

- Coating Technical File in Accordance with the IMO Performance Standard for Protective Coatings

- Control of External Corrosion on Underground or Submerged Metallic Piping Systems

- Mitigation of Alternating Current and Lightning Effects on Metallic Structures and Corrosion Control SystemsMitigation of Alternating Current and Lightning Effects on Metallic Structures and Corrosion Control Systems

- SP0178-2007 Design, Fabrication, and Surface Finish Practices for Tanks and Vessels to Be Lined for Immersion Service

- Extruded Polyolefin Resin Coating Systems with Soft Adhesives for Underground or Submerged Pipe

- Application of Cathodic Protection for External Surfaces of Steel Well Casings

- Design Considerations for Corrosion Control of Reinforcing Steel in Concrete

- Discontinuity (Holiday) Testing of New Protective Coatings on Conductive Substrates

- SP0191-2008 The Application of Internal Plastic Coatings for Oilfield Tubular Goods and Accessories

- SP0192-2012 Monitoring Corrosion in Oil and Gas Production with Iron Counts

- Corrosion Control of Sucker Rods by Chemical Treatment

- SP0196-2011 Galvanic Anode Cathodic Protection of Internal Submerged Surfaces of Steel Water Storage Tanks

- Control of Corrosion Under Thermal Insulation and Fireproofing Materials—A Systems Approach

- SP0199-2009 Installation of Stainless Chromium-Nickel Steel and Nickel-Alloy Roll-Bonded and Explosion-Bonded Clad Plate in Air Pollution Control Equipment

- SP0200-2008 Steel-Cased Pipeline Practices

- Stress Corrosion Cracking (SCC) Direct Assessment Methodology

- Design, Fabrication, and Inspection of Tanks for the Storage of Petroleum Refining Alkylation Unit Spent Sulfuric Acid at Ambient Temperatures

- Internal Corrosion Direct Assessment Methodology for Pipelines Carrying Normally Dry Natural Gas (DG-ICDA)

- Internal Corrosion Direct Assessment Methodology for Liquid Petroleum Pipelines

- SP0210-2010 Pipeline External Corrosion Confirmatory Direct Assessment

- Handling and Proper Usage of Inhibited Oilfield Acids

- SP0274-2011 High-Voltage Electrical Inspection of Pipeline Coatings

- SP0285-2011 Corrosion Control of Underground Storage Tank Systems by Cathodic Protection

- SP0286-2007 Electrical Isolation of Cathodically Protected Pipelines

- Inspection of Linings on Steel and Concrete

- Impressed Current Cathodic Protection of Reinforcing Steel in Atmospherically Exposed Concrete Structures

- Design, Fabrication, and Inspection of Tanks for the Storage of Concentrated Sulfuric Acid and Oleum at Ambient Temperatures

- Application of a Coating System to Interior Surfaces of New and Used Rail Tank Cars

- SP0296-2010 Guidelines for Detection, Repair, and Mitigation of Cracking of Existing Petroleum Refinery Pressure Vessels in Wet H2S Environments

- Sheet Rubber Linings for Abrasion and Corrosion Serviceby RP0298-98 Sheet Rubber Linings for Abrasion and Corrosion Service

- Selection and Application of a Coating System to Interior Surfaces of New and Used Rail Tank Cars in Molten Sulfur ServiceRP0302-2002 Selection and Application of a Coating System to Interior Surfaces of New and Used Rail Tank Cars in Molten Sulfur Service

- Application of a Coating System to Interior Surfaces of Covered Hopper Rail Cars in Plastic, Food, and Chemical Service

- Metallurgical and Inspection Requirements for Cast Sacrificial Anodes for Offshore Applications

- Impressed Current Cathodic Protection of Internal Submerged Surfaces of Carbon Steel Water Storage Tanks

- SP0390-2009 (formerly RP0390), Maintenance and Rehabilitation Considerations for Corrosion Control of Atmospherically Exposed Existing Steel-Reinforced Concrete Structures

- Recommendations for Training and Qualifying Personnel as Railcar Coating and Lining Inspectors

- SP0398-2006 Recommendations for Training and Qualifying Personnel as Railcar Coating and Lining Inspectors

- SP0403-2008 Avoiding Caustic Stress Corrosion Cracking of Carbon Steel Refinery Equipment and Piping

- Format, Content, and Guidelines for Developing a Materials Selection Diagram

- Methods and Controls to Prevent In-Service Environmental Cracking of Carbon Steel Weldments in Corrosive Petroleum Refining Environments

- Considerations in the Selection and Evaluation of Rust Preventives and Vapor Corrosion Inhibitors for Interim (Temporary) Corrosion Protection

- SP0490-2007 Holiday Detection of Fusion-Bonded Epoxy External Pipeline Coatings of 250 to 760 µm (10 to 30 mils)

- SP0491-2012 Worksheet for the Selection of Oilfield Nonmetallic Seal Systems

- Metallurgical and Inspection Requirements for Offshore Pipeline Bracelet Anodes

- SP0502-2010 Pipeline External Corrosion Direct Assessment Methodology

- SP0507-2007 External Corrosion Direct Assessment (ECDA) Integrity Data Exchange (IDX) Format

- Methods of Validating Equivalence to ISO 8502-9 on Measurement of the Levels of Soluble Salts

- SP0572-2007 Design, Installation, Operation, and Maintenance of Impressed Current Deep Groundbeds

- Internal Cathodic Protection Systems in Oil-Treating Vessels Internal Cathodic Protection Systems in Oil-Treating Vessels

- Recommended Practice for Prevention, Detection, and Correction of Deaerator Cracking

- Application of a Coating System to Interior Surfaces of New and Used Rail Tank Cars in Concentrated (90 to 98%) Sulfuric Acid Service

- SP0592-2006 Application of a Coating System to Interior Surfaces of New and Used Rail Tank Cars in Concentrated (90 to 98%) Sulfuric Acid Service

- Standard Format for Collection and Compilation of Data for Computerized Material Corrosion Resistance Database Input

- Coatings and Linings over Concrete for Chemical Immersion and Containment Service


(Back to all Standards)

 
   

KTA-Tator, Inc. - Corporate Office
KTA-Tator EH&S Services

• Ambient & Worker Exposure Air Monitoring
• Safety & Health Program Development
• Lead Paint Assessments
& Specifications
• Health Hazard & Jobsite Safety Assessments
Call 1-800-245-6379


Corrosion Probe, Inc.
From Detection to Correction

Corrosion Probe, Inc. has the Most Concrete Coatings Experience and Expertise. Contact us today at
860-767-4402, www.cpiengineering.com


Van Air Systems
Fill Your Air Dryer with
Dry-O-Lite.

Only Dry-O-Lite desiccant from Van Air Systems keeps compressed air lines dry and trouble free. Perfect for blasting and painting.


Mitsubishi Gas Chemical America
Performance Amine 1,3-BAC

A highly reactive cycloaliphatic diamine offering superior performance. Reasonable cost and curing efficacy makes it suitable for all types of epoxy resin applications.


Advanced Recycling Systems
ADVANCED RECYCLING SYSTEMS (ARS)

Recycling Machines, Dust Collectors, Rapid Deployment units are time-tested and approved for the rugged industrial environment. Contact ARS today!
(330)536-8210


DeFelsko Corporation
PosiTector Dew Point Meter

Measures and records
environmental conditions
during surface prep and
painting. 4 Models
Available – Standard
or Advanced features,
Built-in or Separate probe.


CESCO
AQUA MISER

• Ultra high pressure water blaster • 40,000 PSI stripping and cleaning power CESCO is the leader in environmentally sound cleaning and stripping technologies. See our YouTube videos
Contact us: 888-772-3726
Aquamiser.com
BlastandPaint.com

 
 
 
Technology Publishing

The Technology Publishing Network

The Journal of Protective Coatings & Linings (JPCL) PaintSquare
Durability + Design Paint BidTracker JPCL Europe

 
EXPLORE:      JPCL   |   PaintSquare News   |   Interact   |   Buying Guides   |   Webinars   |   Resources   |   Classifieds
REGISTER AND SUBSCRIBE:      Free PaintSquare Registration   |   Subscribe to JPCL   |   Subscribe to PaintSquare News
MORE:      About PaintSquare.com   |   Privacy policy   |   Terms & conditions   |   Site Map   |   Search   |   Contact Us
 

© Copyright 2000-2014, Technology Publishing / PaintSquare, All rights reserved
2100 Wharton Street, Suite 310, Pittsburgh PA 15203-1951; Tel 1-412-431-8300; Fax 1-412-431-5428; E-mail webmaster@paintsquare.com