PaintSquare.com
Follow us on Twitter Follow us on LinkedIn Like us on Facebook Follow us on Instagram Visit the TPC Store
Search the site

 


ASTM (358)

Search Standards | Back to all Standards


Physical & Mechanical Testing (62)

- Standard Practice for Locating the Thinnest Spot in a Zinc (Galvanized) Coating on Iron or Steel Articles

- Standard Test Method for Weight [Mass] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings

- Standard Test Method for Measurement of Coating Thickness by the Beta Backscatter Method

- Standard Test Method for Porosity in Metallic Coatings by Humid Sulfur Vapor (“Flowers-of-Sulfur”

- Standard Test Method for Gross Defects and Mechanical Damage in Metallic Coatings by Polysulfide Immersion

- Standard Test Method for Gross Defects and Mechanical Damage in Metallic Coatings by the Phosphomolybdic Acid (PMA) Method

- Standard Test Methods for Assessing the Adhesion of Metallic and Inorganic Coatings by the Mechanized Tape Test

- Standard Test Methods for Resistance of Porcelain Enameled Utensils to Boiling

- Standard Test Method for Bond Strength of Chemical-Resistant Mortars

- Standard Test Method for Measurement of Dry-Film Thickness of Organic Coatings Using Micrometers

- Standard Test Methods for Nondestructive Measurement of Dry Film Thickness of Nonmagnetic Coatings Applied to a Ferrous Base

- Standard Test Methods for Measurement of Wet Film Thickness of Organic Coatings

- Standard Test Method for Nondestructive Measurement of Dry Film Thickness of Nonconductive Coatings Applied to a Nonferrous Metal Base

- Standard Test Method for Indendation Hardess of Organic Coatings

- Standard Practice for Testing Water Resistance of Coatings Using Water Fog Apparatus

- Standard Practice for Preparation of Bar and Rod Specimens for Adhesion Tests

- Standard Practice for Testing Water Resistance of Coatings in 100% Relative Humidity

- Standard Test Method for Volume Nonvolatile Matter in Clear or Pigmented Coatings

- Standard Test Method for Evaluating Degree of Surface Disfigurement of Paint Films by Fungal or Algal Growth, or Soil and Dirt Accumulation

- Standard Test Method for Evaluating Coatings Used in Light-Water Nuclear Power Plants at Simulated Design Basis Accident (DBA) Conditions

- Standard Test Method for Effects of Gamma Radiation on Coatings for Use in Light-Water Nuclear Power Plants

- Standard Test Method for Viscosity by Dip-Type Viscosity Cups

- Standard Test Methods for Field Measurement of Surface Profile of Blast Cleaned Steel

- Standard Guide for Establishing Procedures to Qualify and Certify Personnel Performing Coating Work Inspection in Nuclear Facilities

- Standard Practice for Testing Water Resistance of Coatings Using Controlled Condensation

- Standard Test Method for Detection of Lead in Paint by Direct Aspiration Atomic Absorption Spectroscopy

- Standard Test Method for Erosion Testing of Antifouling Paints Using High Velocity Water

- Standard Test Method for Subjecting Marine Antifouling Coating to Biofouling and Fluid Shear Forces in Natural Seawater

- Standard Guide for Assessing the Condition of Aged Coatings on Steel Surfaces

- Standard Test Method for Organotin Release Rates of Antifouling Coating Systems in Sea Water

- Standard Test Method for Viscosity of Paints and Related Materials by ISO Flow Cups

- Standard Practice for Discontinuity (Holiday) Testing of Nonconductive Protective Coating on Metallic Substrates

- Standard Test Method for Mar Resistance of Organic Coatings

- Standard Test Method for Determination of Weight Percent Volatile Content of Solvent-Borne Paints in Aerosol Cans

- Standard Practice for Physical Characterization of Paint Brushes

- Standard Test Method for Determination of Weight Percent Volatile Content of Water-Borne Aerosol Paints

- Standard Practice for Assessing the Solvent Resistance of Organic Coatings Using Solvent Rubs

- Standard Practice for Testing Biofouling Resistance of Marine Coatings Partially Immersed

- Standard Practice for Field Sampling of Coating Films for Analysis for Heavy Metals

- Standard Practice for Determination of Graffiti Resistance

- Standard Test Method for Evaluating Adhesion by Knife

- Standard Guide for Testing Exterior Wood Stains

- Standard Test Method for Wet Adhesion of Latex Paints to a Gloss Alkyd Enamel Substrate

- Standard Test Method for Impact Flexibility of Organic Coatings

- Standard Test Method for An Imaging Technique to Measure Rust Creepage at Scribe on Coated Test Panels Subjected to Corrosive Environments

- Standard Practice for Nondestructive Measurement of Dry Film Thickness of Nonmagnetic Coatings Applied to Ferrous Metals and Nonmagnetic, Nonconductive Coatings Applied to Non-Ferrous Metals

- Standard Guide for Establishing Procedures to Monitor the Performance of Safety-Related Coating Service Level III Lining Systems in an Operating Nuclear Power Plant

- Standard Test Method for Testing Fracture of Level Paintbrush Filaments

- Standard Test Method for Pull-Off Adhesion Strength of Coatings on Concrete Using Portable Pull-Off Adhesion Testers

- Standard Test Method for Measuring Total Water and Volatiles in Liquid Coatings Which Produce Cure Water Upon Heating

- Standard Test Method for Measurement of the Surface Tension of Solid Coatings, Substrates and Pigments using Contact Angle Measurements

- Standard Test Method for Evaluating Ink Stainblocking of Architectural Paint Systems by Visual Assessment

- Standard Practice for Evaluating the Water Wash-Off Resistance of Traffic Paints Using an Atomizing Spray Device

- Standard Practice for Testing Water Resistance of Coatings Using Water Immersion

- Standard Test Method for Measuring Humidity with a Psychrometer (the Measurement of Wet- and Dry-Bulb Temperatures

- Standard Test Method for Surface Burning Characteristics of Building Materials

- Standard Practice for Quality Control Receipt Inspection Procedures for Protective Coatings (Paint), Used in Marine Construction and Shipbuilding

- Standard Practice for Inspection of Marine Surface Preparation and Coating Application

- Standard Test Method for Nondestructive Measurement of Film Thickness of Pipeline Coatings on Steel

- Standard Test Method for Abrasion Resistance of Pipeline Coatings

- Standard Test Methods for Holiday Detection in Pipeline Coatings

- Standard Test Method for Ring Bendability of Pipeline Coatings (Squeeze Test)


(Back to all Standards)

 
   
Advertisements
 
PreTox Products - NexTec, Inc.
 
GOT LEAD? Specify Pretox System products
 
The ONLY Lead Stabilizer Compatible with All Paint Removal Methods. Works with all Blast Media: Grits | Recyclable Abrasives | CO2 | Water | Power Tools | Etc. Call Dave Steffen at 800.338.8296.
 

 
Mitsubishi Gas Chemical America
 
Performance Amine 1,3-BAC
 
A highly reactive cycloaliphatic diamine offering superior performance. Reasonable cost and curing efficacy makes it suitable for all types of epoxy resin applications.
 

 
Industrial Vacuum Equipment Corp.
 
Hurricane Vacuums
& Dust Collectors
 
Vacuum and dust collector hose, filters and related accessories.
IndustrialVacuum.com
 

 
Harsco
 
BLACK BEAUTY® App
 
Download the free app for BLACK BEAUTY® Abrasives. Explore all the features from the palm of your hand.
Toll Free: 1-888-733-3646
 

 
Sherwin-Williams
 
Sherwin-Williams General Polymers Resinous Flooring App
 
Our coatings and linings expertise available 24/7, allowing you to explore the Sherwin-Williams systems best suited for your flooring needs. Android Users Click here to Download the app today!
 

 
Aggreko
 
Dehumidification, Power and Temperature Control Rentals
 
Aggreko offers rental solutions for your painting/coating project. Dehumidifiers, cooling, heating, power and 24/7 service, nationwide.
844-433-9802
 

 
Fischer Technology Inc.
 
NEW PROBE FOR MEASURING TSA THICKNESS
 
Paired with the PHASCOPE PMP10, Fischer’s new probe is quick and accurate for measuring thermally sprayed aluminum on stainless steel. Click to learn more.
 

 
SABRE Autonomous Solutions
 
Productivity
 
Personnel are free to do other tasks while the ALPHA1 does the “dirty work”.
 

 
Bullard
 
Upgrade with the Bullard GenVX
 
Click here for your blast helmet.
 

 
Jotun Paints Inc.
 
Jotun Jotachar 1709
 
Mesh-free passive fire protection epoxy designed to protect against hydrocarbon pool fire scenarios for up to four hours as defined in the ANSI/UL1709 standard.
 

 
 
 

Technology Publishing Co., 1501 Reedsdale Street, Suite 2008, Pittsburgh, PA 15233

TEL 1-412-431-8300  • FAX  1-412-431-5428  •  EMAIL webmaster@paintsquare.com


The Technology Publishing Network

Durability + Design PaintSquare the Journal of Protective Coatings & Linings Paint BidTracker

 
EXPLORE:      JPCL   |   PaintSquare News   |   Interact   |   Buying Guides   |   Webinars   |   Resources   |   Classifieds
REGISTER AND SUBSCRIBE:      Free PaintSquare Registration   |   Subscribe to JPCL   |   Subscribe to PaintSquare News
MORE:      About PaintSquare.com   |   Privacy policy   |   Terms & conditions   |   Site Map   |   Search   |   Contact Us