- ISO 8079:1984 Aerospace process -- Anodic treatment of aluminium alloys -- Sulfuric acid process, dyed coating

- ISO 8080:1985 Aerospace -- Anodic treatment of titanium and titanium alloys -- Sulfuric acid process

- ISO 8081:1985 Aerospace process -- Chemical conversion coating for aluminium alloys -- General purpose

- Personal fall-arrest systems -- Part 1: Full-body harnesses

- Personal fall-arrest systems -- Part 1: Full-body harnesses

- Personal fall-arrest systems -- Part 2: Lanyards and energy absorbers

- Personal fall-arrest systems -- Part 3: Self-retracting lifelines

- Personal fall-arrest systems -- Part 4: Vertical rails and vertical lifelines incorporating a sliding-type fall arrester

- Personal fall-arrest systems -- Part 5: Connectors with self-closing and self-locking gates

- ISO 14567:1999 Personal protective equipment for protection against falls from a height -- Single-point anchor devices

- ISO 10333-1:2000/Amd 1:2002

- ISO 8501-3:2006 Preparation of steel substrates before application of paints and related products -- Visual assessment of surface cleanliness -- Part 3: Preparation grades of welds, cut edges and other areas with surface imperfections

- ISO 8502-2:2005 Preparation of steel substrates before application of paints and related products -- Tests for the assessment of surface cleanliness -- Part 2: Laboratory determination of chloride on cleaned surfaces

- ISO 8501-1:2007 Preparation of steel substrates before application of paints and related products -- Visual assessment of surface cleanliness -- Part 1: Rust grades and preparation grades………..

- ISO 8501-1:2007 Representative photographic examples of the change of appearance imparted to steel when blast-cleaned with different abrasives

- ISO 8502-6:2006 Preparation of steel substrates before application of paints and related products -- Tests for the assessment of surface cleanliness -- Part 6: Extraction of soluble contaminants for analysis -- The Bresle method

- ISO 1463:2003 Metallic and oxide coatings -- Measurement of coating thickness -- Microscopical method

- ISO 8503-1:2012 Preparation of steel substrates before application of paints and related products -- Surface roughness characteristics of blast-cleaned steel substrates -- Part 1: Specifications and definitions for ISO surface profile comparators……..

- ISO 8503-2:2012 Preparation of steel substrates before application of paints and related products -- Surface roughness characteristics of blast-cleaned steel substrates -- Part 2: Method for the grading of surface profile of abrasive blast-cleaned st

- ISO 8503-3:2012 Preparation of steel substrates before application of paints and related products -- Surface roughness characteristics of blast-cleaned steel substrates -- Part 3: Method for the calibration of ISO surface profile comparators and for

- ISO 27874:2008 Metallic coatings -- Test methods for electrodeposited gold and gold alloy coatings -- Part 4: Determination of gold content

- ISO 3861:2005 Rubber hoses for sand and grit blasting -- Specification

- Paints and varnishes -- Terms and definitions for coating materials -- Part 3: Surface preparation and methods of application

- ISO 4526:2004 Metallic coatings -- Electroplated coatings of nickel for engineering purposes

- Autocatalytic nickel-phosphorus coatings -- Specification and test methods

- ISO 4521:2008 Metallic coatings -- Electrodeposited silver and silver alloy coatings for engineering purposes

- ISO 4521:2008 Metallic coatings -- Test methods for electrodeposited silver and silver alloy coatings -- Part 1: Determination of coating thickness

- ISO 4521:2008 Metallic coatings -- Test methods for electrodeposited silver and silver alloy coatings -- Part 2: Adhesion tests

- ISO 4521:2008 Metallic coatings -- Test methods for electrodeposited silver and silver alloy coatings -- Part 3: Determination of the presence of residual salts

- ISO 27874:2008 Metallic coatings -- Electrodeposited gold and gold alloy coatings for engineering purposes

- ISO 27874:2008 Metallic coatings -- Test methods for electrodeposited gold and gold alloy coatings -- Part 1: Determination of coating thickness

- ISO 4524-2:2000 Metallic coatings -- Test methods for electrodeposited gold and gold alloy coatings -- Part 2: Environmental tests

- ISO 8251:2011 Anodized aluminium and aluminium alloys -- Measurement of wear resistance and wear index of anodic oxidation coatings with an abrasive wheel wear test apparatus

- ISO 8993:2010 Anodized aluminium and aluminium alloys -- Rating system for the evaluation of pitting corrosion -- Chart method

- ISO 8994:2011 Anodized aluminium and aluminium alloys -- Rating system for the evaluation of pitting corrosion -- Grid method

- ISO 9587:2007 Metallic and other inorganic coatings -- Pretreatments of iron or steel to reduce the risk of hydrogen embrittlement

- Metallic and other inorganic coatings -- Post-coating treatments of iron or steel to reduce the risk of hydrogen embrittlement

- ISO 9717:2010 Phosphate conversion coatings for metals -- Method of specifying requirements

- Anodizing of aluminium and its alloys -- Determination of the fastness to ultra-violet light of coloured anodic oxide coatings

- ISO 6719:2010 Anodized aluminium and aluminium alloys -- Measurement of reflectance characteristics of aluminium surfaces using integrating-sphere instruments

- ISO 7599:2010 Anodizing of aluminium and its alloys -- General specifications for anodic oxide coatings on aluminium

- ISO 7668:2010 Anodized aluminium and aluminium alloys -- Measurement of specular reflectance and specular gloss at angles of 20 degrees, 45 degrees, 60 degrees or 85 degrees

- ISO 7759:2010 Anodizing of aluminium and its alloys -- Measurement of reflectivity characteristics of aluminium surfaces using abridged goniophotometer or goniophotometer

- ISO 7989:2006 Zinc coatings for steel wire

- ISO 9587:2007 Metallic and other inorganic coatings -- Pretreatments of iron or steel to reduce the risk of hydrogen embrittlement

- Metallic and other inorganic coatings -- Post-coating treatments of iron or steel to reduce the risk of hydrogen embrittlement

- ISO 3882:2003 Metallic and other non-organic coatings -- Review of methods of measurement of thickness

- Metallic coatings -- Review of porosity tests

- Metallic and other inorganic coatings -- Thermal spraying -- Zinc, aluminium and their alloys

- ISO 2085:2010 Anodizing of aluminium and its alloys -- Check of continuity of thin anodic oxide coatings -- Copper sulphate test

- ISO 2106:2011 Anodizing of aluminium and its alloys -- Determination of mass per unit area (surface density) of anodic oxide coatings -- Gravimetric method

- ISO 2135:2010 Anodizing of aluminium and its alloys -- Accelerated test of light fastness of coloured anodic oxide coatings using artificial light

- ISO 2143:2010 Anodizing of aluminium and its alloys -- Estimation of loss of absorptive power of anodic oxide coatings after sealing -- Dye spot test with prior acid treatment

- ISO 2360:2003 Non-conductive coatings on non-magnetic basis metals -- Measurement of coating thickness -- Eddy current method

- ISO 2376:2010 Anodization (anodic oxidation) of aluminium and its alloys -- Insulation check by measurement of breakdown potential

- ISO 2931:2010 Anodizing of aluminium and its alloys -- Assessment of quality of sealed anodic oxide coatings by measurement of admittance or impedance

- ISO 3210:2010 Anodizing of aluminium and its alloys -- Assessment of quality of sealed anodic oxide coatings by measurement of the loss of mass after immersion in phosphoric-chromic acid solution

- ISO 3211:2010 Anodizing of aluminium and its alloys -- Assessment of resistance of anodic oxide coatings to cracking by deformation

- ISO 3613:2010 Chromate conversion coatings on zinc, cadmium, aluminium-zinc alloys and zinc-aluminium alloys -- Test methods

- Protection against corrosion of iron and steel in structures -- Zinc and aluminium coatings -- Guidelines

- ISO 2106:2011

- Specification for hard anodic oxidation coatings on aluminium and its alloys

- ISO 1461:2009 Hot dip galvanized coatings on fabricated iron and steel articles -- Specifications and test methods ISO 1461:1999 Hot dip galvanized coatings on fabricated iron and steel articles -- Specifications and test methods

- ISO 14921:2010 Thermal spraying -- Procedures for the application of thermally sprayed coatings for engineering components

- Anodized aluminium and aluminium alloys -- Visual determination of image clarity of anodic oxidation coatings -- Chart scale method

- Anodized aluminium and aluminium alloys -- Instrumental determination of image clarity of anodic oxidation coatings -- Instrumental method

- ISO 2177:2003 Metallic coatings -- Measurement of coating thickness -- Coulometric method by anodic dissolution

- ISO 2080:2008 Electroplating and related processes -- Vocabulary

- ISO 2081:2008 Metallic coatings -- Electroplated coatings of zinc on iron or steel

- ISO 2082:2008 Metallic coatings -- Electroplated coatings of cadmium on iron or steel

- Preparation of steel substrates before application of paints and related products -- Test methods for non-metallic blast-cleaning abrasives -- Part 1: Sampling

- ISO 11127-2:2011 Preparation of steel substrates before application of paints and related products -- Test methods for non-metallic blast-cleaning abrasives -- Part 2: Determination of particle size distribution

- ISO 11127-3:2011 Preparation of steel substrates before application of paints and related products -- Test methods for non-metallic blast-cleaning abrasives -- Part 3: Determination of apparent density

- ISO 11127-4:2011 Preparation of steel substrates before application of paints and related products -- Test methods for non-metallic blast-cleaning abrasives -- Part 4: Assessment of hardness by a glass slide test

- ISO 11127-5:2011 Preparation of steel substrates before application of paints and related products -- Test methods for non-metallic blast-cleaning abrasives -- Part 5: Determination of moisture

- ISO 11127-6:2011 Preparation of steel substrates before application of paints and related products -- Test methods for non-metallic blast-cleaning abrasives -- Part 6: Determination of water-soluble contaminants by conductivity measurement

- ISO 11127-7:2011 Preparation of steel substrates before application of paints and related products -- Test methods for non-metallic blast-cleaning abrasives -- Part 7: Determination of water-soluble chlorides

- ISO 12944-4:1998 Paints and varnishes -- Corrosion protection of steel structures by protective paint systems -- Part 4: Types of surface and surface preparation

- ISO/TR 15235:2001 Preparation of steel substrates before application of paints and related products -- Collected information on the effect of levels of water-soluble salt contamination

- ISO 11126-1:1993/Cor 1:1997

- ISO 11126-7:1995/Cor 1:1999

- ISO 8502-8:2001 Preparation of steel substrates before application of paints and related products -- Tests for the assessment of surface cleanliness -- Part 8: Field method for the refractometric determination of moisture

- ISO 8502-9:1998 Preparation of steel substrates before application of paints and related products -- Tests for the assessment of surface cleanliness -- Part 9: Field method for the conductometric determination of water-soluble salts

- ISO 8501-2:1994 Preparation of steel substrates before application of paints and related products -- Visual assessment of surface cleanliness -- Part 2: Preparation grades of previously coated steel substrates after localized removal of previous coat

- ISO 8504-1:2000 Preparation of steel substrates before application of paints and related products -- Surface preparation methods -- Part 1: General principles

- ISO 8504-2:2000 Preparation of steel substrates before application of paints and related products -- Surface preparation methods -- Part 2: Abrasive blast-cleaning

- ISO 8504-3:1993 Preparation of steel substrates before application of paints and related products -- Surface preparation methods -- Part 3: Hand- and power-tool cleaning

- Preparation of steel substrates before application of paints and related products -- Specifications for metallic blast-cleaning abrasives -- Part 1: General introduction and classification

- Preparation of steel substrates before application of paints and related products -- Specifications for metallic blast-cleaning abrasives -- Part 2: Chilled-iron grit

- Preparation of steel substrates before application of paints and related products -- Specifications for metallic blast-cleaning abrasives -- Part 3: High-carbon cast-steel shot and grit

- Preparation of steel substrates before application of paints and related products -- Specifications for metallic blast-cleaning abrasives -- Part 4: Low-carbon cast-steel shot

- Preparation of steel substrates before application of paints and related products -- Test methods for metallic blast-cleaning abrasives -- Part 1: Sampling

- Preparation of steel substrates before application of paints and related products -- Test methods for metallic blast-cleaning abrasives -- Part 2: Determination of particle size distribution

- Preparation of steel substrates before application of paints and related products -- Test methods for metallic blast-cleaning abrasives -- Part 3: Determination of hardness

- Preparation of steel substrates before application of paints and related products -- Test methods for metallic blast-cleaning abrasives -- Part 4: Determination of apparent density

- Preparation of steel substrates before application of paints and related products -- Test methods for metallic blast-cleaning abrasives -- Part 5: Determination of percentage defective particles and of microstructure

- Preparation of steel substrates before application of paints and related products -- Test methods for metallic blast-cleaning abrasives -- Part 6: Determination of foreign matter

- Preparation of steel substrates before application of paints and related products -- Test methods for metallic blast-cleaning abrasives -- Part 7: Determination of moisture

- Preparation of steel substrates before application of paints and related products -- Specifications for non-metallic blast-cleaning abrasives -- Part 1: General introduction and classification

- Preparation of steel substrates before application of paints and related products -- Specifications for non-metallic blast-cleaning abrasives -- Part 3: Copper refinery slag

- Preparation of steel substrates before application of paints and related products -- Specifications for non-metallic blast-cleaning abrasives -- Part 4: Coal furnace slag

- Preparation of steel substrates before application of paints and related products -- Specifications for non-metallic blast-cleaning abrasives -- Part 5: Nickel refinery slag

- Preparation of steel substrates before application of paints and related products -- Specifications for non-metallic blast-cleaning abrasives -- Part 6: Iron furnace slag

- Preparation of steel substrates before application of paints and related products -- Specifications for non-metallic blast-cleaning abrasives -- Part 7: Fused aluminium oxide

- Preparation of steel substrates before application of paints and related products -- Specifications for non-metallic blast-cleaning abrasives -- Part 8: Olivine sand

- Preparation of steel substrates before application of paints and related products -- Specifications for non-metallic blast-cleaning abrasives -- Part 9: Staurolite

- Preparation of steel substrates before application of paints and related products -- Specifications for non-metallic blast-cleaning abrasives -- Part 10: Almandite garnet

- ISO 2093:1986 Electroplated coatings of tin -- Specification and test methods

- ISO 4536:1985 Metallic and non-organic coatings on metallic substrates -- Saline droplets corrosion test (SD test)

- ISO 4538:1978 Metallic coatings -- Thioacetamide corrosion test (TAA test)

- ISO 4524-6:1988 Metallic coatings -- Test methods for electrodeposited gold and gold alloy coatings -- Part 6: Determination of the presence of residual salts

- ISO 8502-3:1992 Preparation of steel substrates before application of paints and related products -- Tests for the assessment of surface cleanliness -- Part 3: Assessment of dust on steel surfaces prepared for painting (pressure-sensitive tape method

- ISO 8502-4:1993 Preparation of steel substrates before application of paints and related products -- Tests for the assessment of surface cleanliness -- Part 4: Guidance on the estimation of the probability of condensation prior to paint application

- ISO 8502-5:1998 Preparation of steel substrates before application of paints and related products -- Tests for the assessment of surface cleanliness -- Part 5: Measurement of chloride on steel surfaces prepared for painting (ion detection tube method

- ISO 2178:1982 Non-magnetic coatings on magnetic substrates -- Measurement of coating thickness -- Magnetic method

- ISO 2179:1986 Electroplated coatings of tin-nickel alloy -- Specification and test methods

- ISO 2361:1982 Electrodeposited nickel coatings on magnetic and non-magnetic substrates -- Measurement of coating thickness -- Magnetic method

- ISO 2819:1980 Metallic coatings on metallic substrates -- Electrodeposited and chemically deposited coatings -- Review of methods available for testing adhesion

- ISO 3497:2000 Metallic coatings -- Measurement of coating thickness -- X-ray spectrometric methods

- ISO 3543:2000 Metallic and non-metallic coatings -- Measurement of thickness -- Beta backscatter method

- ISO 3868:1976 Metallic and other non-organic coatings -- Measurement of coating thicknesses -- Fizeau multiple-beam interferometry method

- ISO 3882:1986 Metallic and other non-organic coatings -- Review of methods of measurement of thickness

- ISO 4516:2002 Metallic and other inorganic coatings -- Vickers and Knoop microhardness tests

- ISO 4518:1980 Metallic coatings -- Measurement of coating thickness -- Profilometric method

- ISO 4519:1980 Electrodeposited metallic coatings and related finishes -- Sampling procedures for inspection by attributes

- ISO 4524-2:2000 Metallic coatings -- Test methods for electrodeposited gold and gold alloy coatings -- Part 2: Mixed flowing gas (MFG) environmental tests

- ISO 4524-3:1985 Metallic coatings -- Test methods for electrodeposited gold and gold alloy coatings -- Part 3: Electrographic tests for porosity

- Methods for corrosion testing of metallic and other inorganic coatings on metallic substrates -- Rating of test specimens and manufactured articles subjected to corrosion tests

- Chemical conversion coatings -- Rinsed and non-rinsed chromate conversion coatings on aluminium and aluminium alloys

- ISO 11408:1999 Chemical conversion coatings -- Black oxide coating on iron and steel -- Specification and test methods

- ISO/TR 11728:1993 Anodized aluminium and aluminium alloys -- Accelerated test of weather fastness of coloured anodic oxide coatings using cyclic artificial light and pollution gas

- ISO 14231:2000 Thermal spraying -- Acceptance inspection of thermal spraying equipment

- ISO 14232:2000 Thermal spraying -- Powders -- Composition and technical supply conditions

- ISO 14916:1999 Thermal spraying -- Determination of tensile adhesive strength

- ISO 14917:1999 Thermal spraying -- Terminology, classification

- ISO 14918:1998 Thermal spraying -- Approval testing of thermal sprayers Thermal spraying -- Approval testing of thermal sprayers Thermal spraying -- Approval testing of thermal sprayers

- ISO 14919:2001 Thermal spraying -- Wires, rods and cords for flame and arc spraying -- Classification -- Technical supply conditions

- ISO 14920:1999 Thermal spraying -- Spraying and fusing of self-fluxing alloys

- ISO 14922-1:1999 Thermal spraying -- Quality requirements of thermally sprayed structures -- Part 1: Guidance for selection and use

- ISO 14922-2:1999 Thermal spraying -- Quality requirements of thermally sprayed structures -- Part 2: Comprehensive quality requirements

- ISO 14922-3:1999 Thermal spraying -- Quality requirements of thermally sprayed structures -- Part 3: Standard quality requirements

- ISO 14922-4:1999 Thermal spraying -- Quality requirements of thermally sprayed structures -- Part 4: Elementary quality requirements

- ISO 15730:2000 Metallic and other inorganic coatings -- Electropolishing as a means of smoothing and passivating stainless steel

- ISO 1460:1992 Metallic coatings -- Hot dip galvanized coatings on ferrous materials -- Gravimetric determination of the mass per unit area

- ISO 2063:1991 Metallic and other inorganic coatings -- Thermal spraying -- Zinc, aluminium and their alloys

- ISO 2064:1996 Metallic and other inorganic coatings -- Definitions and conventions concerning the measurement of thickness

- Metallic and other inorganic coatings -- Measurement of mass per unit area -- Review of gravimetric and chemical analysis methods

- ISO/TR 8125:1984 Anodizing of aluminium and its alloys -- Determination of colour and colour difference of coloured anodic coatings

- ISO 6988:1985 Metallic and other non organic coatings -- Sulfur dioxide test with general condensation of moisture

- ISO 7583:1986 Anodizing of aluminium and its alloys -- Vocabulary

- ISO 4539:1980 Electrodeposited chromium coatings -- Electrolytic corrosion testing (EC test)

- ISO 4541:1978 Metallic and other non-organic coatings -- Corrodkote corrosion test (CORR test)

- ISO 4543:1981 Metallic and other non-organic coatings -- General rules for corrosion tests applicable for storage conditions

- ISO 6988:1985 Metallic and other non organic coatings -- Sulfur dioxide test with general condensation of moisture

- ISO 7587:1986 Electroplated coatings of tin-lead alloys -- Specification and test methods

- ISO 8401:1986 Metallic coatings -- Review of methods of measurement of ductility

- ISO 9220:1988 Metallic coatings -- Measurement of coating thickness -- Scanning electron microscope method

- ISO 15720:2001 Metallic coatings -- Porosity tests -- Porosity in gold or palladium coatings on metal substrates by gel-bulk electrography

- ISO 15721:2001 Metallic coatings -- Porosity tests -- Porosity in gold or palladium coatings by sulfurous acid/sulfur dioxide vapour

- ISO 15724:2001 Metallic and other inorganic coatings -- Electrochemical measurement of diffusible hydrogen in steels -- Barnacle electrode method

- ISO 14656:1999 Epoxy powder and sealing material for the coating of steel for the reinforcement of concrete

- Methods for corrosion testing of metallic and other inorganic coatings on metallic substrates -- Rating of test specimens and manufactured articles subjected to corrosion tests

- ISO 12687:1996 Metallic coatings -- Porosity tests -- Humid sulfur (flowers of sulfur) test

- ISO 14647:2000 Metallic coatings -- Determination of porosity in gold coatings on metal substrates -- Nitric acid vapour test

- ISO 3868:1976 Metallic and other non-organic coatings -- Measurement of coating thicknesses -- Fizeau multiple-beam interferometry method

- Metallic coatings -- Porosity tests -- Ferroxyl test

- Metallic and other inorganic coatings -- Test for residual embrittlement in both metallic-coated and uncoated externally-threaded articles and rods -- Inclined wedge method

- ISO 10683:2000 Fasteners -- Non-electrolytically applied zinc flake coatings

- ISO 12686:1999 Metallic and other inorganic coatings -- Automated controlled shot-peening of metallic articles prior to nickel, autocatalytic nickel or chromium plating, or as a final finish

- ISO 11126-1:1993/Cor 2:1997

- ISO 3892:2000 Conversion coatings on metallic materials -- Determination of coating mass per unit area -- Gravimetric methods

- ISO 4520:1981 Chromate conversion coatings on electroplated zinc and cadmium coatings

- ISO 4536:1985 Metallic and non-organic coatings on metallic substrates -- Saline droplets corrosion test (SD test)

- ISO 4541:1978 Metallic and other non-organic coatings -- Corrodkote corrosion test (CORR test)

- ISO 4543:1981 Metallic and other non-organic coatings -- General rules for corrosion tests applicable for storage conditions Metallic and other non-organic coatings -- General rules for corrosion tests applicable for storage conditions

- ISO 8994:2011 Anodized aluminium and aluminium alloys -- Rating system for the evaluation of pitting corrosion -- Grid method

- ISO 9223:2012 Corrosion of metals and alloys -- Corrosivity of atmospheres -- Classification

- ISO 9224:2012 Corrosion of metals and alloys -- Corrosivity of atmospheres -- Guiding values for the corrosivity categories

- ISO 9225:2012 Corrosion of metals and alloys -- Corrosivity of atmospheres -- Measurement of pollution

- ISO 9226:2012 Corrosion of metals and alloys -- Corrosivity of atmospheres -- Determination of corrosion rate of standard specimens for the evaluation of corrosivity

- ISO 11130:2010 Corrosion of metals and alloys -- Alternate immersion test in salt solution

- ISO 9591:2004 Corrosion of aluminium alloys -- Determination of resistance to stress corrosion cracking

- Corrosion tests in artificial atmosphere at very low concentrations of polluting gas(es)

- Corrosion of metals and alloys -- Aqueous corrosion testing of zirconium alloys for use in nuclear power reactors

- ISO 11306:1998 Corrosion of metals and alloys -- Guidelines for exposing and evaluating metals and alloys in surface sea water

- ISO 11463:1995 Corrosion of metals and alloys -- Evaluation of pitting corrosion

- ISO 11474:1998 Corrosion of metals and alloys -- Corrosion tests in artificial atmosphere -- Accelerated outdoor test by intermittent spraying of a salt solution (Scab test)

- ISO 11782-1:1998 Corrosion of metals and alloys -- Corrosion fatigue testing -- Part 1: Cycles to failure testing

- ISO 11782-2:1998 Corrosion of metals and alloys -- Corrosion fatigue testing -- Part 2: Crack propagation testing using precracked specimens

- ISO 11845:1995 Corrosion of metals and alloys -- General principles for corrosion testing

- ISO 11846:1995 Corrosion of metals and alloys -- Determination of resistance to intergranular corrosion of solution heat-treatable aluminium alloys

- ISO 11881:1999 Corrosion of metals and alloys -- Exfoliation corrosion testing of aluminium alloys

- ISO 14993:2001 Corrosion of metals and alloys -- Accelerated testing involving cyclic exposure to salt mist, "dry" and "wet" conditions

- ISO 15324:2000 Corrosion of metals and alloys -- Evaluation of stress corrosion cracking by the drop evaporation test

- ISO 10270:1995/Cor 1:1997

- ISO 11881:1999/Cor 1:1999

- ISO 9400:1990 Nickel-based alloys -- Determination of resistance to intergranular corrosion

- ISO 3651-1:1998 Determination of resistance to intergranular corrosion of stainless steels -- Part 1: Austenitic and ferritic-austenitic (duplex) stainless steels -- Corrosion test in nitric acid medium by measurement of loss in mass (Huey test)

- ISO 3651-2:1998 Determination of resistance to intergranular corrosion of stainless steels -- Part 2: Ferritic,austenitic and ferritic-austenitic (duplex) stainless steels -- Corrosion test in media containing sulfuric acid

- ISO 6509:1981 Corrosion of metals and alloys -- Determination of dezincification resistance of brass

- ISO 6957:1988 Copper alloys -- Ammonia test for stress corrosion resistance

- ISO 7384:1986 Corrosion tests in artificial atmosphere -- General requirements

- ISO 7441:1984 Corrosion of metals and alloys -- Determination of bimetallic corrosion in outdoor exposure corrosion tests

- ISO 7539-1:1987 Corrosion of metals and alloys -- Stress corrosion testing -- Part 1: General guidance on testing procedures

- ISO 7539-2:1989 Corrosion of metals and alloys -- Stress corrosion testing -- Part 2: Preparation and use of bent-beam specimens

- ISO 7539-3:1989 Corrosion of metals and alloys -- Stress corrosion testing -- Part 3: Preparation and use of U-bend specimens

- ISO 7539-4:1989 Corrosion of metals and alloys -- Stress corrosion testing -- Part 4: Preparation and use of uniaxially loaded tension specimens

- ISO 7539-5:1989 Corrosion of metals and alloys -- Stress corrosion testing -- Part 5: Preparation and use of C-ring specimens

- ISO 7539-8:2000 Corrosion of metals and alloys -- Stress corrosion testing -- Part 8: Preparation and use of specimens to evaluate weldments

- ISO 8044:1999 Corrosion of metals and alloys -- Basic terms and definitions

- ISO 6271-1:2004 Clear liquids -- Estimation of colour by the platinum-cobalt scale

- ISO 7142:2007 Binders for paints and varnishes -- Epoxy resins -- General methods of test

- ISO 7143:2007 Paints, varnishes and binders -- Methods of test for characterizing water-based coating materials and binders

- ISO 11402:2004 Binders for paints and varnishes -- Determination of free-formaldehyde content of amino resins -- Sodium sulfite titrimetric method

- ISO/TR 9038:2002 Paints and varnishes -- Determination of the ability of liquid paints to sustain combustion

- ISO 9117-1:2009 Paints and varnishes -- Determination of through-dry state and through-dry time -- Method of test

- ISO 9514:2005 Paints and varnishes -- Determination of the pot-life of liquid systems -- Preparation and conditioning of samples and guidelines for testing

- ISO 787-7:2009 General methods of test for pigments and extenders -- Part 7: Determination of residue on sieve -- Water method -- Manual procedure

- Dyestuffs -- Determination of solubility in organic solvents -- Gravimetric method

- ISO 7783:2011

- ISO 3679:2004 Paints, varnishes, petroleum and related products -- Determination of flashpoint -- Rapid equilibrium method

- ISO 3680:2004 Paints, varnishes, petroleum and related products -- Flash/no flash test -- Rapid equilibrium method

- ISO 4618:2006 Paints and varnishes -- Terms and definitions for coating materials -- Part 1: General terms

- ISO 4618:2006 Paints and varnishes -- Terms and definitions for coating materials -- Part 2: Special terms relating to paint characteristics and properties

- ISO 4618:2006 Paints and varnishes -- Terms and definitions for coating materials -- Part 3: Surface preparation and methods of application

- ISO 9117-2:2010 Paints and varnishes -- Pressure test for stac

- ISO 4628-1:2003 Paints and varnishes -- Evaluation of degradation of paint coatings -- Designation of intensity, quantity and size of common types of defect -- Part 1: General principles and rating schemes

- ISO 4628-2:2003 Paints and varnishes -- Evaluation of degradation of paint coatings -- Designation of intensity, quantity and size of common types of defect -- Part 2: Designation of degree of blistering

- ISO 4628-3:2003 Paints and varnishes -- Evaluation of degradation of paint coatings -- Designation of intensity, quantity and size of common types of defect -- Part 3: Designation of degree of rusting

- ISO 4628-4:2003 Paints and varnishes -- Evaluation of degradation of paint coatings -- Designation of intensity, quantity and size of common types of defect -- Part 4: Designation of degreee of cracking

- ISO 4628-5:2003 Paints and varnishes -- Evaluation of degradation of paint coatings -- Designation of intensity, quantity and size of common types of defect -- Part 5: Designation of degree of flaking

- ISO 6272-1:2011 Paints and varnishes -- Rapid-deformation (impact resistance) tests -- Part 1: Falling-weight test, large-area indenter

- ISO 6272-2:2011 Paints and varnishes -- Rapid-deformation (impact resistance) tests -- Part 2: Falling-weight test, small-area indenter

- ISO 6504-3:2006 Paints and varnishes -- Determination of hiding power -- Part 3: Determination of contrast ratio (opacity) of light-coloured paints at a fixed spreading rate

- Paints and varnishes -- Determination of water-vapour transmission rate -- Part 1: Dish method for free films

- ISO 7783:2011 Paints and varnishes -- Coating materials and coating systems for exterior masonry and concrete -- Part 2: Determination and classification of water-vapour transmission rate (permeability)

- ISO 6860:2006 Paints and varnishes -- Bend test (conical mandrel)

- ISO 2409:2007 Paints and varnishes -- Cross-cut test

- ISO 1513:2010 Paints and varnishes -- Examination and preparation of samples for testing

- ISO 1514:2004 Paints and varnishes -- Standard panels for testing

- ISO 2815:2003 Paints and varnishes -- Buchholz indentation test

- ISO 1513:2010

- ISO 9117-3:2010 Paints and varnishes -- Surface-drying test -- Ballotini method

- ISO 1519:2011 Paints and varnishes -- Bend test (cylindrical mandrel)

- ISO 1522:2006 Paints and varnishes -- Pendulum damping test

- ISO 1522:2006

- ISO 12944-5:2007 Paints and varnishes -- Corrosion protection of steel structures by protective paint systems -- Part 5: Protective paint systems

- ISO 1518-1:2011 Paints and varnishes -- Scratch test

- ISO 1520:2006 Paints and varnishes -- Cupping test

- ISO 2431:2011 Paints and varnishes -- Determination of flow time by use of flow cups

- ISO 2431:2011

- ISO 2808:2007 Paints and varnishes -- Determination of film thickness

- ISO 2810:2004 Paints and varnishes -- Notes for guidance on the conduct of natural weathering tests

- ISO 2811-1:2011 Paints and varnishes -- Determination of density -- Part 1: Pyknometer method

- ISO 2811-2:2011 Paints and varnishes -- Determination of density -- Part 2: Immersed body (plummet) method

- ISO 2811-3:2011 Paints and varnishes -- Determination of density -- Part 3: Oscillation method

- ISO 2811-4:2011 Paints and varnishes -- Determination of density -- Part 4: Pressure cup methodISO 2811-4:1997

- ISO 2812-1:2007 Paints and varnishes -- Determination of resistance to liquids -- Part 1: General methods

- ISO 2812-2:2007 Paints and varnishes -- Determination of resistance to liquids -- Part 2: Water immersion method

- Micaceous iron oxide pigments for paints -- Specifications and test methods

- ISO 15181-1:2007 Paints and varnishes -- Determination of release rate of biocides from antifouling paints -- Part 1: General method for extraction of biocides

- ISO 15181-2:2007 Paints and varnishes -- Determination of release rate of biocides from antifouling paints -- Part 2: Determination of copper-ion concentration in the extract and calculation of the release rate

- ISO 150:2006 Raw, refined and boiled linseed oil for paints and varnishes -- Specifications and methods of test

- ISO 11507:2007 Paints and varnishes -- Exposure of coatings to artificial weathering -- Exposure to fluorescent UV and water

- ISO 11890-1:2007 Paints and varnishes -- Determination of volatile organic compound (VOC) content -- Part 1: Difference method

- ISO 11997-1:2005 Paints and varnishes -- Determination of resistance to cyclic corrosion conditions -- Part 1: Wet (salt fog)/dry/humidity

- ISO 11998:2006 Paints and varnishes -- Determination of wet-scrub resistance and cleanability of coatings

- ISO 12137-1:2011 Paints and varnishes -- Determination of mar resistance -- Part 1: Method using a curved stylus

- ISO 1518-2:2011 Paints and varnishes -- Determination of mar resistance -- Part 2: Method using a pointed stylus

- ISO 1248:2006 Iron oxide pigments for paints

- ISO 11341:2004 Paints and varnishes -- Artificial weathering and exposure to artificial radiation -- Exposure to filtered xenon-arc radiation

- Binders for paints and varnishes -- Determination of monomeric diisocyanates in polyisocyanate resins

- ISO 11909:2007 Binders for paints and varnishes -- Polyisocyanate resins -- General methods of test

- ISO 13885-1:2008 Binders for paints and varnishes -- Gel permeation chromatography (GPC) -- Part 1: Tetrahydrofuran (THF) as eluent

- ISO 11997-1:2005

- ISO 2431:2011

- ISO 12137:2011

- Paints and varnishes -- Corrosion protection of steel structures by protective paint systems -- Measurement of, and acceptance criteria for, the thickness of dry films on rough surfaces

- Corrosion protection of steel structures by protective paint systems -- Assessment of, and acceptance criteria for, the adhesion/cohesion (fracture strength) of a coating -- Part 1: Pull-off testing

- ISO 7252:1984 Paints and varnishes -- Determination of total mercury -- Flameless atomic absorption spectrometric method

- ISO 7724-1:1984 Paints and varnishes -- Colorimetry -- Part 1: Principles

- ISO 7724-2:1984 Paints and varnishes -- Colorimetry -- Part 2: Colour measurement

- ISO 7724-3:1984 Paints and varnishes -- Colorimetry -- Part 3: Calculation of colour differences

- ISO 2884-1:1999 Paints and varnishes -- Determination of viscosity using rotary viscometers -- Part 1: Cone-and-plate viscometer operated at a high rate of shear

- ISO 3231:1993 Paints and varnishes -- Determination of resistance to humid atmospheres containing sulfur dioxide

- ISO 3233:1998 Paints and varnishes -- Determination of percentage volume of non-volatile matter by measuring the density of a dried coating

- ISO 3248:1998 Paints and varnishes -- Determination of the effect of heat

- ISO 3668:1998 Paints and varnishes -- Visual comparison of the colour of paints

- ISO 4623-1:2000 Paints and varnishes -- Determination of resistance to filiform corrosion -- Part 1: Steel substrates

- ISO 4624:2002 Paints and varnishes -- Pull-off test for adhesion

- ISO 8130-4:1992/Cor 1:1993

- ISO 2040:1972 Strontium chromate pigments for paints

- ISO 6270-1:1998 Paints and varnishes -- Determination of resistance to humidity -- Part 1: Continuous condensation

- ISO 1516:2002 Determination of flash/no flash -- Closed cup equilibrium method

- ISO 6713:1984 Paints and varnishes -- Preparation of acid extracts from paints in liquid or powder form

- ISO 6503:1984 Paints and varnishes -- Determination of total lead -- Flame atomic absorption spectrometric method

- ISO 6504-1:1983 Paints and varnishes -- Determination of hiding power -- Part 1: Kubelka-Munk method for white and light-coloured paints

- ISO 7784-1:1997 Paints and varnishes -- Determination of resistance to abrasion -- Part 1: Rotating abrasive-paper-covered wheel method

- ISO 7784-2:1997 Paints and varnishes -- Determination of resistance to abrasion -- Part 2: Rotating abrasive rubber wheel method

- ISO 7784-3:2000 Paints and varnishes -- Determination of resistance to abrasion -- Part 3: Reciprocating test panel method

- ISO 8130-1:1992 Coating powders -- Part 1: Determination of particle size distribution by sieving

- ISO 8130-2:1992 Coating powders -- Part 2: Determination of density by gas comparison pyknometer (referee method)

- ISO 8130-3:1992 Coating powders -- Part 3: Determination of density by liquid displacement pyknometer

- ISO 510:1977 Red lead for paints

- ISO 788:1974 Ultramarine pigments for paints

- ISO 277:2002 Binders for paints and varnishes -- Raw tung oil -- Requirements and methods of test

- ISO 2114:2000 Plastics (polyester resins) and paints and varnishes (binders) -- Determination of partial acid value and total acid value

- ISO 3681:1996 Binders for paints and varnishes -- Determination of saponification value -- Titrimetric method

- ISO 3233:1998/Cor 1:1999

- ISO 1249:1974/Cor 1:1992

- ISO 4619:1998 Driers for paints and varnishes

- ISO 6744-1:1999 Binders for paints and varnishes -- Alkyd resins -- Part 1: General methods of test

- ISO 6744-2:1999 Binders for paints and varnishes -- Alkyd resins -- Part 2: Determination of phthalic anhydride content

- ISO 6744-3:1999 Binders for paints and varnishes -- Alkyd resins -- Part 3: Determination of unsaponifiable matter content

- ISO 6744-4:1999 Binders for paints and varnishes -- Alkyd resins -- Part 4: Determination of fatty acid content

- ISO 4629:1996 Binders for paints and varnishes -- Determination of hydroxyl value -- Titrimetric method

- ISO 2813:1994/Cor 1:1997

- ISO 8130-9:1992 Coating powders -- Part 9: Sampling

- ISO 14446:1999 Binders for paints and varnishes -- Determination of the viscosity of industrial cellulose nitrate solutions and classification of such solutions

- ISO 15880:2000 Paints, varnishes and binders -- Determination of MEQ value of water-based coating materials and binders

- ISO 4626:1980 Volatile organic liquids -- Determination of boiling range of organic solvents used as raw materials

- ISO 8623:1997 Tall-oil fatty acids for paints and varnishes -- Specifications and test methods

- ISO 8130-4:1992 Coating powders -- Part 4: Calculation of lower explosion limit

- ISO 8130-5:1992 Coating powders -- Part 5: Determination of flow properties of a powder/air mixture

- ISO 8130-6:1992 Coating powders -- Part 6: Determination of gel time of thermosetting coating powders at a given temperature

- ISO 8130-7:1992 Coating powders -- Part 7: Determination of loss of mass on stoving

- ISO 8130-8:1994 Coating powders -- Part 8: Assessment of the storage stability of thermosetting powders

- ISO 8130-10:1998 Coating powders -- Part 10: Determination of deposition efficiency

- ISO 8130-11:1997 Coating powders -- Part 11: Inclined-plane flow test

- ISO 8130-12:1998 Coating powders -- Part 12: Determination of compatibility

- ISO 8130-13:2001 Coating powders -- Part 13: Particle size analysis by laser diffraction

- ISO 11668:1997 Binders for paints and varnishes -- Chlorinated polymerization resins -- General methods of test

- ISO 11908:1996 Binders for paints and varnishes -- Amino resins -- General methods of test

- ISO 11503:1995 Paints and varnishes -- Determination of resistance to humidity (intermittent condensation)

- ISO 787-8:2000 General methods of test for pigments and extenders -- Part 8: Determination of matter soluble in water -- Cold extraction method

- ISO 787-9:1981 General methods of test for pigments and extenders -- Part 9: Determination of pH value of an aqueous suspension

- ISO 787-10:1993 General methods of test for pigments and extenders -- Part 10: Determination of density -- Pyknometer method

- ISO 787-11:1981 General methods of test for pigments and extenders -- Part 11: Determination of tamped volume and apparent density after tamping

- ISO 787-13:2002 General methods of test for pigments and extenders -- Part 13: Determination of water-soluble sulfates, chlorides and nitrates

- ISO 787-14:2002 General methods of test for pigments and extenders -- Part 14: Determination of resistivity of aqueous extract

- ISO 787-15:1986 General methods of test for pigments and extenders -- Part 15: Comparison of resistance to light of coloured pigments of similar types

- ISO 787-16:1986 General methods of test for pigments and extenders -- Part 16: Determination of relative tinting strength (or equivalent colouring value) and colour on reduction of coloured pigments -- Visual comparison method

- ISO 787-17:2002 General methods of test for pigments and extenders -- Part 17: Comparison of lightening power of white pigments

- ISO 787-18:1983 General methods of test for pigments and extenders -- Part 18: Determination of residue on sieve -- Mechanical flushing procedure

- ISO 787-19:1974 General methods of test for pigments -- Part 19: Determination of water-soluble nitrates (Salicylic acid method)

- ISO 787-21:1979 General methods of test for pigments and extenders -- Part 21: Comparison of heat stability of pigments using a stoving medium

- ISO 787-22:1980 General methods of test for pigments and extenders -- Part 22: Comparison of resistance to bleeding of pigments

- ISO 787-24:1985 General methods of test for pigments and extenders -- Part 24: Determination of relative tinting strength of coloured pigments and relative scattering power of white pigments -- Photometric methods

- ISO 787-25:1993 General methods of test for pigments and extenders -- Part 25: Comparison of the colour, in full-shade systems, of white, black and coloured pigments -- Colorimetric method

- ISO 1247:1974 Aluminium pigments for paints

- ISO 1249:1974 Zinc chromate pigments -- Basic zinc potassium chromate pigments and zinc tetrahydroxychromate pigments

- ISO 2495:1995 Iron blue pigments -- Specifications and methods of test

- ISO 3262-1:1997 Extenders for paints -- Specifications and methods of test -- Part 1: Introduction and general test methods

- ISO 3262-2:1998 Extenders for paints -- Specifications and methods of test -- Part 2: Barytes (natural barium sulfate)

- ISO 3262-3:1998 Extenders for paints -- Specifications and methods of test -- Part 3: Blanc fixe

- ISO 3262-4:1998 Extenders for paints -- Specifications and methods of test -- Part 4: Whiting

- ISO 3262-5:1998 Extenders for paints -- Specifications and methods of test -- Part 5: Natural crystalline calcium carbonate

- ISO 3262-6:1998 Extenders for paints -- Specifications and methods of test -- Part 6: Precipitated calcium carbonate

- ISO 3262-7:1998 Extenders for paints -- Specifications and methods of test -- Part 7: Dolomite

- ISO 3262-8:1999 Extenders for paints -- Specifications and methods of test -- Part 8: Natural clay

- ISO 3262-9:1997 Extenders for paints -- Specifications and methods of test -- Part 9: Calcined clay

- ISO 3262-10:2000 Extenders for paints -- Specifications and methods of test -- Part 10: Natural talc/chlorite in lamellar form

- ISO 3262-11:2000 Extenders for paints -- Specifications and methods of test -- Part 11: Natural talc, in lamellar form, containing carbonates

- ISO 3262-12:2001 Extenders for paints -- Specifications and methods of test -- Part 12: Muscovite-type mica

- ISO 3262-13:1997 Extenders for paints -- Specifications and methods of test -- Part 13: Natural quartz (ground)

- ISO 3262-14:2000 Extenders for paints -- Specifications and methods of test -- Part 14: Cristobalite

- ISO 3262-15:2000 Extenders for paints -- Specifications and methods of test -- Part 15: Vitreous silica

- ISO 3262-16:2000 Extenders for paints -- Specifications and methods of test -- Part 16: Aluminium hydroxides

- ISO 3262-17:2000 Extenders for paints -- Specifications and methods of test -- Part 17: Precipitated calcium silicate

- ISO 3262-18:2000 Extenders for paints -- Specifications and methods of test -- Part 18: Precipitated sodium aluminium silicate

- ISO 3262-19:2000 Extenders for paints -- Specifications and methods of test -- Part 19: Precipitated silica

- ISO 3262-20:2000 Extenders for paints -- Specifications and methods of test -- Part 20: Fumed silica

- ISO 3262-21:2000 Extenders for paints -- Specifications and methods of test -- Part 21: Silica sand (unground natural quartz)

- ISO 3262-22:2001 Extenders for paints -- Specifications and methods of test -- Part 22: Flux-calcined kieselguhr

- ISO 3549:1995 Zinc dust pigments for paints -- Specifications and test methods

- ISO 3711:1990 Lead chromate pigments and lead chromate-molybdate pigments -- Specifications and methods of test

- ISO 4620:1986 Cadmium pigments -- Specifications and methods of test

- ISO 4621:1986 Chrome oxide green pigments -- Specifications and methods of test

- ISO 6745:1990 Zinc phosphate pigments for paints -- Specifications and methods of test

- ISO 15234:1999 Paints and varnishes -- Testing of formaldehyde-emitting coatings and melamine foams -- Determination of the steady-state concentration of formaldehyde in a small test chamber

- ISO 15528:2000 Paints, varnishes and raw materials for paints and varnishes -- Sampling

- ISO 15710:2002 Paints and varnishes -- Corrosion testing by alternate immersion in and removal from a buffered sodium chloride solution

- ISO 3270:1984 Paints and varnishes and their raw materials -- Temperatures and humidities for conditioning and testing

- ISO 473:1982 Lithopone pigments for paints -- Specifications and methods of test

- ISO 591-1:2000 Titanium dioxide pigments for paints -- Part 1: Specifications and methods of test

- ISO 787-1:1982 General methods of test for pigments and extenders -- Part 1: Comparison of colour of pigments

- ISO 787-2:1981 General methods of test for pigments and extenders -- Part 2: Determination of matter volatile at 105 degrees C

- ISO 787-3:2000 General methods of test for pigments and extenders -- Part 3: Determination of matter soluble in water -- Hot extraction method

- ISO 787-4:1981 General methods of test for pigments and extenders -- Part 4: Determination of acidity or alkalinity of the aqueous extract

- ISO 787-5:1980 General methods of test for pigments and extenders -- Part 5: Determination of oil absorption value

- ISO 787-23:1979 ISO 787-23:1979

- ISO 2068:1972 Barium chromate pigments for paints

- ISO 13803:2000 Paints and varnishes -- Determination of reflection haze on paint films at 20 degrees

- ISO 12944-2:1998 Paints and varnishes -- Corrosion protection of steel structures by protective paint systems -- Part 2: Classification of environments

- ISO 11997-2:2000 Paints and varnishes -- Determination of resistance to cyclic corrosion conditions -- Part 2: Wet (salt fog)/dry/humidity/UV light

- ISO 12944-1:1998 Paints and varnishes -- Corrosion protection of steel structures by protective paint systems -- Part 1: General introduction

- ISO 12944-3:1998 Paints and varnishes -- Corrosion protection of steel structures by protective paint systems -- Part 3: Design considerations

- ISO 15184:1998 Paints and varnishes -- Determination of film hardness by pencil test

- ISO 14680-1:2000 ISO Paints and varnishes -- Determination of pigment content -- Part 1: Centrifuge method

- ISO 14680-2:2000 Paints and varnishes -- Determination of pigment content -- Part 2: Ashing method

- ISO 14680-3:2000 Paints and varnishes -- Determination of pigment content -- Part 3: Filtration method

- ISO 8780-1:1990 Pigments and extenders -- Methods of dispersion for assessment of dispersion characteristics -- Part 1: Introduction

- ISO 8780-2:1990 Pigments and extenders -- Methods of dispersion for assessment of dispersion characteristics -- Part 2: Dispersion using an oscillatory shaking machine

- ISO 8780-3:1990 Pigments and extenders -- Methods of dispersion for assessment of dispersion characteristics -- Part 3: Dispersion using a high-speed impeller mill

- ISO 8780-4:1990 Pigments and extenders -- Methods of dispersion for assessment of dispersion characteristics -- Part 4: Dispersion using a bead mill

- ISO 8780-5:1990 Pigments and extenders -- Methods of dispersion for assessment of dispersion characteristics -- Part 5: Dispersion using an automatic muller

- ISO 8780-6:1990 Pigments and extenders -- Methods of dispersion for assessment of dispersion characteristics -- Part 6: Dispersion using a triple-roll mill

- ISO 8781-1:1990 Pigments and extenders -- Methods of assessment of dispersion characteristics -- Part 1: Assessment from the change in tinting strength of coloured pigments

- ISO 8781-2:1990 Pigments and extenders -- Methods of assessment of dispersion characteristics -- Part 2: Assessment from the change in fineness of grind

- ISO 8781-3:1990 Pigments and extenders -- Methods of assessment of dispersion characteristics -- Part 3: Assessment from the change in gloss

- ISO 8130-6:1992/Amd 1:1998

- ISO 12944-6:1998 Paints and varnishes -- Corrosion protection of steel structures by protective paint systems -- Part 6: Laboratory performance test methods

- ISO 12944-7:1998 Paints and varnishes -- Corrosion protection of steel structures ISO 12944-7:1988 Paints and varnishes -- Corrosion protection of steel structures by protective paint systems -- Part 7: Execution and supervision of paint work

- ISO 12944-8:1998 Paints and varnishes -- Corrosion protection of steel structures by protective paint systems -- Part 8: Development of specifications for new work and maintenance

- ISO 15741:2001 Paints and varnishes -- Friction-reduction coatings for the interior of on- and offshore steel pipelines for non-corrosive gases

- ISO 80128:1999 Rubber and/or plastics hoses and hose assemblies for airless paint spraying -- Specification

- ISO 1523:2002 Determination of flash point -- Closed cup equilibrium method

- ISO 1524:2000 Paints, varnishes and printing inks -- Determination of fineness of grind Paints, varnishes and printing inks -- Determination of fineness of grind

- ISO 1247:1974/Amd 1:1982

- ISO 2813:1994 Paints and varnishes -- Determination of specular gloss of non-metallic paint films at 20 degrees, 60 degrees and 85 degrees

- ISO 2814:1973 Paints and varnishes -- Comparison of contrast ratio (hiding power) of paints of the same type and colour

- ISO 3856-1:1984 Paints and varnishes -- Determination of "soluble" metal content -- Part 1: Determination of lead content -- Flame atomic absorption spectrometric method and dithizone spectrophotometric method

- ISO 3856-2:1984 Paints and varnishes -- Determination of "soluble" metal content -- Part 2: Determination of antimony content -- Flame atomic absorption spectrometric method and Rhodamine B spectrophotometric method

- ISO 3856-3:1984 Paints and varnishes -- Determination of "soluble" metal content -- Part 3: Determination of barium content -- Flame atomic emission spectrometric method

- ISO 3856-4:1984 Paints and varnishes -- Determination of "soluble" metal content -- Part 4: Determination of cadmium content -- Flame atomic absorption spectrometric method and polarographic method

- ISO 3856-5:1984 Paints and varnishes -- Determination of "soluble" metal content -- Part 5: Determination of hexavalent chromium content of the pigment portion of the liquid paint or the paint in powder form -- Diphenylcarbazide spectrophotometric me

- ISO 3856-6:1984 Paints and varnishes -- Determination of "soluble" metal content -- Part 6: Determination of total chromium content of the liquid portion of the paint -- Flame atomic absorption spectrometric method

- ISO 3856-7:1984 Paints and varnishes -- Determination of "soluble" metal content -- Part 7: Determination of mercury content of the pigment portion of the paint and of the liquid portion of water-dilutable paints -- Flameless atomic absorption spect