PaintSquare.com
      | Connect Follow us on Twitter Like us on Facebook
About | Subscribe | Advertise
  

 


AWWA (101)

Search Standards | Back to all Standards


Coagulation Chemicals (6)

- Liquid Sodium Silicate

- Aluminum Sulfate—Liquid, Ground, or Lump

- Sodium Aluminate

See more  


Concrete Pipe (5)

- Design of Prestressed Concrete Cylinder Pipe

- Concrete Pressure Pipe, Bar-Wrapped, Steel-Cylinder Type

- Reinforced Concrete Pressure Pipe, Steel-Cylinder Type

See more  


Disinfection Chemicals (4)

- Liquid Chlorine

- Ammonium Sulfate

- Sodium Chlorite

See more  


Disinfection of Facilities (4)

- Disinfecting Water Mains

- Disinfection of Water-Storage Facilities

- Disinfection of Water Treatment Plants

See more  


Ductile-Iron Pipe and Fittings (8)

- ANSI Standard for Cement-Mortar Lining for Ductile-Iron Pipe and Fittings for Water

- ANSI Standard for Polyethylene Encasement for Ductile-Iron Pipe Systems

- ANSI Standard for Ductile-Iron and Gray-Iron Fittings, 3 In. Through 48 In. (76 mm Through 1,219 mm), for Water

See more  


Filtration Media (2)

- Filtering Material

- Precoat Filter Media


Meters (8)

- Direct-Reading, Remote-Registration Systems for Cold-Water Meters

- Cold-Water Meters—Displacement Type, Bronze Main Case

- Cold-Water Meters—Compound Type

See more  


Pipe Installation (5)

- Installation of Steel Water Pipe--4 In. (100 mm) and Larger

- Cement-Mortar Lining of Water Pipelines in Place—4 In. (100 mm) and Larger

- Underground Installation of Polyvinyl Chloride (PVC) Pressure Pipe and Fittings for Water

See more  


Plant Equipment (2)

- Contact-Molded, Fiberglass-Reinforced Plastic Wash Water Troughs and Launders (Includes addendum F101a-97)

- Matched-Die-Molded, Fiberglass-Reinforced Plastic Weir Plates, Scum Baffles, and Mounting Brackets (Includes addendum F102a-97)


Plastic Pipe (7)

- Polyvinyl Chloride (PVC) Pressure Pipe, and Fabricated Fittings, 4 In. Through 12 In. (100 mm Through 300 mm), for Water Distribution

- Polyvinyl Chloride (PVC) Pressure Fittings for Water—4 In. Through 8 In. (100 mm Through 200 mm)

- Fiberglass Pressure Pipe

See more  


Prophylaxis (3)

- Sodium Fluoride

- Sodium Fluorosilicate

- Fluorosilicic Acid


Scale and Corrosion Control Chemicals (8)

- Sulfur Dioxide

- Sodium Hydroxide (Caustic Soda)

- Calcium Chloride

See more  


Service Lines (1)

- Underground Service Line Valves and Fittings (Also Included: Collected Standards for Service Line Materials)


Softening Chemicals (3)

- Sodium Chloride

- Soda Ash

- Quicklime and Hydrated Lime (Includes addendum B202a-97)


Steel Pipe (13)

- Cement-Mortar Protective Lining and Coating for Steel Water Pipe—4 In. (100 mm) and Larger—Shop Application

- Steel Water Pipe—6 In. (150 mm) and Larger

- Coal-Tar Protective Coatings and Linings for Steel Water Pipelines—Enamel and Tape—Hot-Applied (Includes addendum C203a-99)

See more  


Storage (6)

- Automatically Controlled, Impressed-Current Cathodic Protection for the Interior of Steel Water Tanks

- Wire- and Strand-Wound, Circular, Prestressed Concrete Water Tanks (Includes addendum D110a-96)

- Factory-Coated Bolted Steel Tanks for Water Storage

See more  


Taste and Odor Control (6)

- Potassium Permanganate

- Granular Activated Carbon

- Reactivation of Granulated Activated

See more  


Valves and Hydrants (10)

- Metal-Seated Gate Valves for Water Supply Service (Includes addendum C500a-95)

- Double Check Valve Backflow Prevention Assembly

- Reduced-Pressure Principle Backflow Prevention Assembly

See more  


(Back to all Standards)

 
   

Thermion Inc
Buy Back Program

We are offering $5,000
credit for your old Model
This drive system is
being discontinued by
the manufacturer.
More information at
thermioninc.com
877.884.3428


Global Werbeagentur GmbH (obo: Vincentz Network Hannover - European Coatings Show)
European Coatings Show

For the first time over 1,000 exhibitors from all over the world! Plan your visit online now!


CHLOR*RID International Inc.
Free Webinar

Learn about soluble salts, along with a discussion on allowable levels.
More information at
www.chlor-rid.com,

800-422-3217


Sidewinder/Persyst Enterprises, Inc.
The Sidewinder Model M2 Solvent Recycler

Combat the rising cost of gunwash, thinners, acetone & more while drastically reducing waste disposal coat.


HoldTight Solutions Inc.
NO FLASH RUST -
NO CONTAMINANTS

Our HoldTight®102 salt remover & flash rush inhibitor prevents flash rust by removing surface contaminants.
Contact us for your nearest distributor. (800) 319.8802 sales@holdtight.com


Wasser High-Tech Coatings Inc.
Wasser Coatings Protect

Wasser Coatings offer a complete range of Moisture Cure Urethane (NEPCOAT approved) systems in addition to Polyurea membranes and linings(NSF).
www.wassercoatings.com


NLB Corporation
Water jet surface prep, high or low

See how quickly HydroPrep® tools do surface prep, with no containment needed. Choose automated Crawler for overhead, Vortex™ for floors, or handheld VertaJet™.


Mohawk Garnet
Mohawk Garnet™ – North American Hard Rock

Rough around the edges – which is what you want in your abrasive. More information at 1.866.642.7638 or info@mohawkgarnet.com


Polygon
POLYGON - Temporary Humidity Control

We specialize in innovative climate control solutions for industrial painting, utilizing alternative energy sources and combining desiccants with heating or cooling.

 
 
 
Technology Publishing

The Technology Publishing Network

The Journal of Protective Coatings & Linings (JPCL) PaintSquare
Durability + Design Paint BidTracker

 
EXPLORE:      JPCL   |   PaintSquare News   |   Interact   |   Buying Guides   |   Webinars   |   Resources   |   Classifieds
REGISTER AND SUBSCRIBE:      Free PaintSquare Registration   |   Subscribe to JPCL   |   Subscribe to PaintSquare News
MORE:      About PaintSquare.com   |   Privacy policy   |   Terms & conditions   |   Site Map   |   Search   |   Contact Us
 

© Copyright 2000-2015, Technology Publishing / PaintSquare, All rights reserved
2100 Wharton Street, Suite 310, Pittsburgh PA 15203-1951; Tel 1-412-431-8300; Fax 1-412-431-5428; E-mail webmaster@paintsquare.com