PaintSquare.com
      | Connect Follow us on Twitter Like us on Facebook
About | Subscribe | Advertise
  

 


SSPC (107)

Search Standards | Back to all Standards


Abrasives (AB) (3)

- SSPC-AB 1, Mineral and Slag Abrasives

- SSPC-AB 3, Ferrous Metallic Abrasive

- SSPC-AB 2, Cleanliness of Recycled Ferrous Metallic Abrasives


Paint and Coatings (PAINT) (23)

- SSPC-Paint 39 Two-Component Aliphatic Polyurea Topcoat, Fast or Moderate Drying, Performance-Based

- SSPC-Paint 29, Zinc Dust Sacrificial Primer, Performance-Based

- Paint 44, Liquid-Applied Organic Polymeric Coatings and Linings for Concrete Structures in Municipal Wastewater Facilities, Performance-Based

See more  


Paint Application (PA) (15)

- SSPC-PA 15, Method for Preparing Steel Test Panels for Evaluation of Coating Performance

- SSPC-PA 14, Field Application of Plural Component Polyurea and Polyurethane Thick Film Coatings to Concrete and Steel

- SSPC-PA 16, Method for Evaluating Scribe Undercutting of Exposed Steel Test Panels

See more  


Painting Systems (PS) and Coating Systems (CS) (16)

- SSPC-CS 23.00/AWS C2.23M/NACE No. 12, Specification for the Application of Thermal Spray Coatings (Metallizing) of Aluminum, Zinc, and Their Alloys and Composites for the Corrosion Protection of Steel

- SSPC-PS Guide 7.00, Guide for Selecting One-Coat Shop Painting Systems

- SSPC-PS Guide 8.00, Guide to Topcoating Zinc-Rich Primers

See more  


Qualification Procedures (QP) (8)

- SSPC-QP 6, Standard Procedure for Evaluating the Qualifications of Contractors Who Apply Thermal Spray (Metallizing) for Corrosion Protection of Steel and Concrete Structures

- SSPC-QS 1, Standard Procedure for Evaluating a Contractor's Advanced Quality Management System

- SSPC-QP 5, Standard Procedure for Evaluating Qualifications of Coating and Lining Inspection Companies

See more  


Surface Preparation (SP) (17)

- SSPC-SP 1, Solvent Cleaning

- SSPC-SP WJ-2/NACE WJ-2, Waterjet Cleaning of Metals – Very Thorough Cleaning

- SSPC-SP WJ-3/NACE WJ-3, Waterjet Cleaning of Metals – Thorough Cleaning

See more  


Technology Guides (GUIDE) (9)

- SSPC-Guide 7, Guide for the Disposal of Lead-Contaminated Surface Preparation Debris

- SSPC-Guide 16, Guide to Specifying and Selecting Dust Collectors

- SSPC-Guide 17, Guide to Developing a Corporate Safety Program for Industrial Painting and Coating Contractors

See more  


Technology Reports (TR) (5)

- SSPC-TR 5/ICRI 03741/NACE 02203, Design, Installation, and Maintenance of Protective Polymer Flooring Systems for Concrete

- SSPC-TR 1/NACE 6G194, Thermal Pre-Cleaning

- SSPC-TR 2/NACE 6G198, Wet Abrasive Blast Cleaning

See more  


Technology Updates (TU) (10)

- SSPC-TU 1, Surface-Tolerant Coatings for Steel

- SSPC-Guide 15, Field Methods for Retrieval and Analysis of Soluble Salts on Steel and Other Nonporous Substrates

- SSPC-TU 10, Procedures for Applying Thick Film Coatings and Surfacings Over Concrete Floors

See more  


Test Panel Preparation Methods (ME) (1)

- SSPC-ME 1, Uncontaminated Rusted Steel


(Back to all Standards)

 
   

Safway Services
Suspended Access Made Easy With QuikDeck™

The smart choice for suspended access, QuikDeck’s interchangeable, lightweight components make them easy to set up and reassemble when you need to move.


Dampney Co., Inc.
Rubber In a can!

Rubberized Spray in a
Handy Aerosol Can

• Stays flexible
• Seals off moisture penetration
• Non sagging formulation
• Will not crack, chip or peel
• Apply to wet and dry surfaces
• Paintable


Novatek Corporation
Dustless Coatings Removal

Strip it, clean it, and profile it,
all dust free! High production
rates and Blast like finishes.
Comply with new lead
standards.


International Bridge Conference
International Bridge Conference

Save the dates to attend the 2015 IBC. Four full days of educational sessions and 150 exhibits all in the City of Bridges. Click here for more information.


Minerals Research & Recovery

HIGH PERFORMANCE ABRASIVES


“Made in the USA!”

Why recycle waste from other countries? Go FASTER, CLEANER, at 1/3 THE COST with MR&R “All-American” Sharpshot®HP!!

WATCH THE VIDEO


HoldTight Solutions Inc.
NO FLASH RUST -
NO CONTAMINANTS

Our HoldTight®102 salt remover & flash rush inhibitor prevents flash rust by removing surface contaminants.
Contact us for your nearest distributor. (800) 319.8802 sales@holdtight.com


WINOA Group
W Abrasives : Shot Peening Solutions

W Abrasives has developed an exclusive range of products to boost your peening and blasting performances.


Polyval Coatings
Polyflex® Polyurea Linings

Polyflex™ new Polyurea Geotextile Membrane System has been specifically engineered to protect the environment in containment applications.
www.polyflexlinings.com


NLB Corporation
VacLance cleans up as you do surface preparation

Add vacuum recovery to any NLB rotating water jet lance with a VacLance attachment and vacuum source. Model DM32283 works vertically, horizontally and in corners.


Dow Polyurethane Systems
Choose the Right Coat

Dow’s high-performance, protective polyurethane spray elastomer system increases durability for steel and concrete applications.

 
 
 
Technology Publishing

The Technology Publishing Network

The Journal of Protective Coatings & Linings (JPCL) PaintSquare
Durability + Design Paint BidTracker

 
EXPLORE:      JPCL   |   PaintSquare News   |   Interact   |   Buying Guides   |   Webinars   |   Resources   |   Classifieds
REGISTER AND SUBSCRIBE:      Free PaintSquare Registration   |   Subscribe to JPCL   |   Subscribe to PaintSquare News
MORE:      About PaintSquare.com   |   Privacy policy   |   Terms & conditions   |   Site Map   |   Search   |   Contact Us
 

© Copyright 2000-2015, Technology Publishing / PaintSquare, All rights reserved
2100 Wharton Street, Suite 310, Pittsburgh PA 15203-1951; Tel 1-412-431-8300; Fax 1-412-431-5428; E-mail webmaster@paintsquare.com