PaintSquare.com
      | Connect Follow us on Twitter Like us on Facebook
About | Subscribe | Advertise
  

 

Your Daily Quiz

| More

Quiz Leaderboard: 7/28 - 8/27/2015    Sign in to track your quiz score! | Full Leaderboard

  • 1. Michael Beitzel (18/19 answered correctly)

  • 2. Robert Cloutier (18/19 answered correctly)

  • 3. Matt Burst (18/19 answered correctly)

  • 4. William Turcotte (18/19 answered correctly)

  • 5. Shabbir Hussain Shah (18/19 answered correctly)

  • 6. Douglas Steitz (18/19 answered correctly)

  • 7. Doug Driscoll, Sr. (18/19 answered correctly)

  • 8. willem van Gent (18/19 answered correctly)

  • 9. Mark Gierke (18/19 answered correctly)

  • 10. Farooq M (18/19 answered correctly)

  • 11. Stephen Lipsham (17/19 answered correctly)

  • 12. Robert Gantt (17/19 answered correctly)

  • 13. David Danielson (17/19 answered correctly)

  • 14. Mark Anater (17/19 answered correctly)

  • 15. Dave Heyne (17/19 answered correctly)

  • 16. Robin Hasak (17/19 answered correctly)

  • 17. Bryon Beck (16/19 answered correctly)

  • 18. Lee Burke (16/19 answered correctly)

  • 19. David Zuskin (15/19 answered correctly)

  • 20. Mark Allen (15/19 answered correctly)


Tuesday, December 13, 2011

What is “sweat-in” time?

Time required for solvent to evaporate from an applied coating film
Time required for dehumidification to minimize moisture in a tank so that coating work can begin
Time required for some 2-component materials to react with one another chemically before the coating can be applied
Time required for concrete to cure sufficiently to be coated with a film-forming material

Log in or register to PaintSquare save your results and track your cumulative quiz score!

   


Previous Quizzes from the Past Week

Monday, December 12, 2011
Who was recently elected Vice President of SSPC and therefore is in line to be President in 2013?

Friday, December 9, 2011
Which of the following coating types is an inorganic/organic hybrid?

Thursday, December 8, 2011
Why are chlorinated rubber and vinyl coatings no longer widely used in the U.S. as protective coatings?

Wednesday, December 7, 2011
A reduction in air abrasive blast nozzle pressure from 100 psi to 80 psi has what effect on the productivity of the blasting operation?

Tuesday, December 6, 2011
Which of the following attributes is not normally considered an advantage of vinyl ester coatings?


More previous quizzes

SSPC: The Society for Protective Coatings
http://www.sspc.org/

Join SSPC and Enhance
Your Career !


HoldTight Solutions Inc.
NO FLASH RUST -
NO CONTAMINANTS

Our HoldTight®102 salt remover & flash rust preventer prevents flash
rust by removing surface contaminants. It has no equal; only wannabees.
Contact us for your
nearest distributor.
(800) 319.8802 sales@holdtight.com


NLB Corporation
MiniARM automates surface prep

NLB’s Mini ARM lets an operator control high-pressure water jets remotely, with fast tool changes for different jobs. It maximizes protection and productivity.


CS Unitec
Work Cleaner and Safer

CS Unitec’s Vibro-Lo low-vibration scalers offer high performance for greater productivity & improved operator comfort. Optional dust shroud. info@csunitec.com


Mitsubishi Gas Chemical America
Performance Amine 1,3-BAC

A highly reactive cycloaliphatic diamine offering superior performance. Reasonable cost and curing efficacy makes it suitable for all types of epoxy resin applications.


Carboline Company
Fireproofing Solutions

Pyroclad® X1 Thermo-Lag® Pyrocrete® – protecting against hydrocarbon and jet fires, explosions, and cryogenic spills.


DeFelsko Corporation
PosiTest Automatic Adhesion Tester

Electronically controlled hydraulic pump applies smooth and continuous pull-off pressure at user selectable rates. No twisting, pumping or cranking.


AGC Chemicals
LUMIFLON®FEVE Resin Used On Vibrant Red Bridge

LUMIFLON based coatings can last up to 30 years without fading, offering a low-maintenance solution that retains color and gloss and can be field-applied.


Modern Safety Techniques
Modern Safety Techniques

See our Low Temperature Catalyst for your CO removal needs. Help to provide your workers with safe, comfortable breathing air!

 
 
 
Technology Publishing

The Technology Publishing Network

The Journal of Protective Coatings & Linings (JPCL) PaintSquare
Durability + Design Paint BidTracker

 
EXPLORE:      JPCL   |   PaintSquare News   |   Interact   |   Buying Guides   |   Webinars   |   Resources   |   Classifieds
REGISTER AND SUBSCRIBE:      Free PaintSquare Registration   |   Subscribe to JPCL   |   Subscribe to PaintSquare News
MORE:      About PaintSquare.com   |   Privacy policy   |   Terms & conditions   |   Site Map   |   Search   |   Contact Us
 

© Copyright 2000-2015, Technology Publishing / PaintSquare, All rights reserved
2100 Wharton Street, Suite 310, Pittsburgh PA 15203-1951; Tel 1-412-431-8300; Fax 1-412-431-5428; E-mail webmaster@paintsquare.com