PaintSquare.com
      | Connect Follow us on Twitter Like us on Facebook
About | Subscribe | Advertise
  

 

Download our Free Top Contractors e-Resource Guide.

Your Daily Quiz

| More

Quiz Leaderboard: 4/30 - 5/30/2016    Sign in to track your quiz score! | Full Leaderboard

  • 1. Michael Beitzel (20/21 answered correctly)

  • 2. Robert Cloutier (20/21 answered correctly)

  • 3. Robin Hasak (20/21 answered correctly)

  • 4. Matt Burst (20/21 answered correctly)

  • 5. Brian McEwen (20/21 answered correctly)

  • 6. Doug Driscoll, Sr. (20/21 answered correctly)

  • 7. David Zuskin (20/21 answered correctly)

  • 8. willem van Gent (20/21 answered correctly)

  • 9. SUDALAI RAJ (20/21 answered correctly)

  • 10. Mark Allen (20/21 answered correctly)

  • 11. Mark Gierke (20/21 answered correctly)

  • 12. Juan I. Ordinas (20/21 answered correctly)

  • 13. Stephen Lipsham (20/21 answered correctly)

  • 14. Gustavo Vidal (20/21 answered correctly)

  • 15. Mark Anater (19/21 answered correctly)

  • 16. Farooq M (19/21 answered correctly)

  • 17. James Albertoni (19/21 answered correctly)

  • 18. Dave Heyne (19/21 answered correctly)

  • 19. Adam Carter (19/21 answered correctly)

  • 20. Gunnar Ackx (19/21 answered correctly)


Monday, August 1, 2011

Which of the following statements about SSPC-SP 11, Power Tool Cleaning to Bare Metal, is correct?

It has no surface profile requirement.
It requires a minimum 1-mil surface profile.
It requires the removal of only loosely adhering mill scale, rust, and paint.
None of these statements is correct.

Log in or register to PaintSquare save your results and track your cumulative quiz score!

   


Previous Quizzes from the Past Week

Friday, July 29, 2011
Which of the following statement about mixing two-component materials is not true?

Thursday, July 28, 2011
A White Metal Blast, SSPC-SP 5, allows what to remain on the surface after blast cleaning?

Wednesday, July 27, 2011
When there is a conflict between requirements on a product data sheet and the specification, such as film thickness requirements, which is the governing document?

Tuesday, July 26, 2011
True or false: Respirators suitable for use in Immediately Dangerous to Life or Health (IDLH) atmospheres can include a combination full facepiece pressure demand supplied-air respirator (SAR) with auxiliary self-contained air supply.

Monday, July 25, 2011
What coating defect is most likely to be caused by exceeding the recoat interval recommended for an epoxy coating?


More previous quizzes

Montipower, Inc.
The MBX Bristle Blaster

Get a 2.7 to 3.3 mil profile and a Near White Metal Clean. For info visit www.mbxit.com or call 877 629-8777


Axxiom Manufacturing
Revolutionary Units

By integrating Schmidt's Aftercoolers with our blast pots, these systems remove moisture from air and minimize equipment footprint on jobsite.
Call 1-800-231-2085


CHLOR*RID International Inc.
Free Webinar

Learn about soluble salts, along with a discussion on allowable levels.
More information at
www.chlor-rid.com,

800-422-3217


NLB Corporation
MiniARM automates surface prep

NLB’s Mini ARM lets an operator control high-pressure water jets remotely, with fast tool changes for different jobs. It maximizes protection and productivity.


Monti Tools, Inc.
BRISTLE BLASTER® - THE ORIGINAL ONE

Surface cleanliness of SSPC-10 | Anchor profile
up to 4.7 mils | Removes corrosion & coatings |
ATEX approved for zone 1
| www.monti.com | 832-623-7970


Novatek Corporation
Novatek Corporation, Dustless Coatings Removal

Strip, clean and profile all dust free! Comply with new lead standards. Contact today: (866) 563-7800


SSPC: The Society for Protective Coatings
http://www.sspc.org/

Join SSPC and Enhance
Your Career !


Atlantic Design, Inc.
CLICK HERE

to see what we did to this dust collector! ADI can increase the efficiency and life of your equipment! Any brand, for less than new! 866.Call.ADI


Advanced Recycling Systems
ADVANCED RECYCLING SYSTEMS (ARS)

Recycling Machines, Dust Collectors, Rapid Deployment units are time-tested and approved for the rugged industrial environment. Contact ARS today!
(330)536-8210


Blastox/The TDJ Group, Inc.
Blastox - One Step
Lead Abatement

Don't waste money on added labor steps with other methods. Don't mix, meter or apply at the job-site. Avoid strict hazardous waste rules.
Let your painters paint

 
 
 
Technology Publishing

The Technology Publishing Network

The Journal of Protective Coatings & Linings (JPCL) PaintSquare
Durability + Design Paint BidTracker

 
EXPLORE:      JPCL   |   PaintSquare News   |   Interact   |   Buying Guides   |   Webinars   |   Resources   |   Classifieds
REGISTER AND SUBSCRIBE:      Free PaintSquare Registration   |   Subscribe to JPCL   |   Subscribe to PaintSquare News
MORE:      About PaintSquare.com   |   Privacy policy   |   Terms & conditions   |   Site Map   |   Search   |   Contact Us
 

© Copyright 2000-2016, Technology Publishing / PaintSquare, All rights reserved
2100 Wharton Street, Suite 310, Pittsburgh PA 15203-1951; Tel 1-412-431-8300; Fax 1-412-431-5428; E-mail webmaster@paintsquare.com