|
Sherwin-Williams
Our 3,500 locations give you a level of service that is simply unmatched.
POLYFLEX brand Polyurea
high chemical resistant membranes are used extensively to protect our environment in secondary containment applications.
Performance Amine 1,3-BAC
A highly reactive cycloaliphatic diamine offering superior performance. Reasonable cost and curing efficacy makes it suitable for all types of epoxy resin applications.
New resins from BASF will have metals loving water:
Excellent corrosion resistance, low VOC, high gloss, thin films basf.us/industrialcoatings
polyorders@basf.com
800-231-7868
Wasser Coatings Protect
some of the most important bridges in the country; learn about our NEPCOAT-approved system and our entire range of MCU & Polyurea coatings.
1-800-627-2968
www.wassercoatings.com
Rubber In a can!
Rubberized Spray in a
Handy Aerosol Can
• Stays flexible
• Seals off moisture penetration
• Non sagging formulation
• Will not crack, chip or peel
• Apply to wet and dry surfaces
• Paintable
Termarust (HR CSA) Chemically Stops
Active Corrosion
Hydro Utility Penstock Overcoated in 1997. Was power washed and overcoated with major cost saving. No environmental impact with Termarust's low LC50 of 41,007 ppm.
|
Follow us on Twitter
Join us on Facebook
