The First Word in Protective & Marine Coatings

A Product of Technology Publishing / PaintSquare
JPCL | PaintSquare News | Durability + Design | Paint BidTracker

Friday, August 3, 2012

Log in or register to PaintSquare save your results and track your cumulative quiz score!

Previous Quizzes from the Past Week

Wednesday, August 1, 2012
If a specification requires one of the following–brush-off blasting (SSPC-SP 7), commercial blasting (SSPC-SP 6), or near-white blasting (SSPC-SP 10), what other cleaning standard is invoked?

Tuesday, July 31, 2012
What organization recently issued a standard for measuring the profile of concrete after surface preparation?

Monday, July 30, 2012
What coating property is evaluated with the tape test?

Friday, July 27, 2012
In air abrasive blasting, why is it sometimes useful to adjust the angle of attack (angle of the nozzle in relation to the workpiece)?

Thursday, July 26, 2012
Why must laitance and efflorescence be removed before coating concrete?

Your Job Just Got Safer!
In 2013 we've streamlined
many of our products.
They are even more
economical, with enhanced
safety features. All with the same ADI power you expect. 866.Call.ADI

Best NSF 61.5 Approved Potable Water Polyurea
VersaFlex Polyurea Earns Highest ANSI/NSF 61.5 Rating for High Temp Service, Minimum Tank Size and Max Thickness. All Polyureas Are Not Created Equal. FREE WHITE PAPER.

CNSL Based Products
Renewable CNSL epoxy curing agents and resins with fast cure at low temperature, adhesion to unprepared surfaces and excellent corrosion and water protection.

GMA Garnet™
Natural Abrasives
- Superior cleaning performance
- Even Profile
- Low Dust
- Cost-Effective
- Environmentally friendly
- Recyclable up to 5 times
Tel : +1 832 243 9300

New resins from BASF will have metals loving water:
Excellent corrosion resistance, low VOC, high gloss, thin films basf.us/industrialcoatings
polyorders@basf.com
800-231-7868

NEW PosiTector
Inspection Kits
PosiTector 6000 Coating Thickness Gage easily converts to a surface profile gage, dew point meter or ultrasonic wall thickness gage with a simple probe change.

One Team. Infinite Solutions.
Greenhorne & O’Mara is now Stantec. Contact us for coatings and corrosion consulting, design, analysis, and inspection services at john.woods@stantec.com.

The Technology Publishing Network