PaintSquare.com
      | Connect Follow us on Twitter Like us on Facebook
About | Subscribe | Advertise
  

 

Problem Solving Forum

| More

May 5 - May 9, 2014

What is the best method for removing fluorescent orange spray graffiti from a brick wall?


Selected Answers

From Car F. of Municipal City on May 13, 2014:
In my municipal setting, we are constantly confronted with graffiti. I have tried many, many products, but I have found one that meets my requirements for speed, efficiency, and environmental regulations. Apply a coat of paint remover. Cover with a sheet of black plastic to increase the temperature inside the shroud, helping the active ingredients in the paint remover. Allow to dwell overnight. Remove the plastic sheet. Use a plastic or wire brush to scrub the overspray. Wipe off most of the paint remover. Powers wash at a pressure that will not damage the bricks. Contain the power washing run-off.

From Jack Seeney of Brichem on May 5, 2014:
I suggest spraying on a colored, moisture-curing polysiloxane anti-graffiti coating, which can be applied over tagged surfaces. In the future, I suggest using either the clear or colored version of this permanent anti-graffiti coating. Then any tags applied over the anti-graffiti coating  can be removed with a cold water wash. No harsh chemicals are required!

Please sign in to submit your answer this question    

Tagged categories: Graffiti; Graffiti removal


Current PSF Question | Submit a PSF Question | Full PSF Archive

HoldTight Solutions Inc.
NO FLASH RUST -
NO CONTAMINANTS

Our HoldTight®102 salt remover & flash rush inhibitor prevents flash rust by removing surface contaminants.
Contact us for your nearest distributor. (800) 319.8802 sales@holdtight.com


Minerals Research & Recovery

HIGH PERFORMANCE ABRASIVES


“Made in the USA!”

Why recycle waste from other countries? Go FASTER, CLEANER, at 1/3 THE COST with MR&R “All-American” Sharpshot®HP!!

WATCH THE VIDEO


U.S. Zinc
Historic Reliability. Innovative Performance.

The reliable protection properties of our zinc dust help combat deterioration and corrosion in your paints and coatings. U.S. Zinc - Helping the world work™


WINOA Group
W Abrasives : Maintenance Pack

The blasting company able to reduce your maintenance costs up to 30% by fine-tuning consumption, and increasing productivity. Visit us during the GIFA (Hall15 - D14).


Novetas Solutions
Number 1 Crushed Glass Abrasive in America!

Manufactured from 100% Recycled Glass.
NO Crystalline Silica,
Beryllium & Arsenic
Great White Metal Finish!
4 plants on Navy QPL
Call us at 866-775-6226


Atlas Material Testing Technology

Helping You Put Your Products To The Test

• Outdoor Accelerated
Weathering
• Laboratory Testing
Services
• Accelerated Weathering
Instruments

www.atlas-mts.com atlas.info@ametek.com


Mohawk Garnet
North American Hard Rock Garnet

A complete range of quality garnet from two new processing plants. Serving both the abrasive blasting and water jet markets.
Call 1.866.642.7638
Email for follow up – mheilimo@mohawkgarnet.com


NLB Corporation
Water jet surface prep, high or low

See how quickly HydroPrep® tools do surface prep, with no containment needed. Choose automated Crawler for overhead, Vortex™ for floors, or handheld VertaJet™.

 
 
 
Technology Publishing

The Technology Publishing Network

The Journal of Protective Coatings & Linings (JPCL) PaintSquare
Durability + Design Paint BidTracker

 
EXPLORE:      JPCL   |   PaintSquare News   |   Interact   |   Buying Guides   |   Webinars   |   Resources   |   Classifieds
REGISTER AND SUBSCRIBE:      Free PaintSquare Registration   |   Subscribe to JPCL   |   Subscribe to PaintSquare News
MORE:      About PaintSquare.com   |   Privacy policy   |   Terms & conditions   |   Site Map   |   Search   |   Contact Us
 

© Copyright 2000-2015, Technology Publishing / PaintSquare, All rights reserved
2100 Wharton Street, Suite 310, Pittsburgh PA 15203-1951; Tel 1-412-431-8300; Fax 1-412-431-5428; E-mail webmaster@paintsquare.com