PaintSquare.com
Follow us on Twitter Follow us on LinkedIn Like us on Facebook Follow us on Instagram Visit the TPC Store
Search the site

 

Problem Solving Forum

| More

November 25 - December 6, 2013

During a week of heavy rain, we painted the interior of a heated concrete building. The paint blistered badly a week later on the walls with an outside exposure. What’s the best way to remove the coating, prepare the surface, and recoat to prevent future blistering?


Selected Answers

From Car F. of Municipal City on December 3, 2013:
Before doing anything on the INSIDE, I would investigate whats on the outside walls and what kind of waterproofing was applied [if any] to the exterior walls. You seem to indicate that the walls NOT facing the outside were fine, so this may point  to a problem related to the exterior walls and not necessarily to the actual coating. Concrete is not impervious, and water and moisture will migrate, sometimes a great distance.

From juan hurtado of International Paint on November 27, 2013:
You can also remove the coating by blasting with with crushed  walnut shells, which is a lot faster than soda blasting.And I would also recommend  checking the concrete for moisture.

From Michael Quaranta of OPERATIONS 40 on November 25, 2013:
Well, for the first element of searching for a response, what kind of coating was used? Probably the heated concrete building was very high in interior humidity, and if you used the standard epoxy, it was doomed for failure. Without knowing what coating was used, it becomes a guess about the best the removal process. Soda blast would be slow but perhaps the best. Next, use a water-based epoxy, and either spray of roll that coating (colors available) on the concrete wall. The pot life is more than 2 hours and the cure is razor-proof after 24 hours.

Please sign in to submit your answer this question    

Tagged categories: Blistering; Coating failure


Current PSF Question | Submit a PSF Question | Full PSF Archive

Advertisements
 
Strategic Materials Inc.
 
Coming April 2017
 
Available April 2017. TruAbrasives™, a clean crushed glass abrasive superior to other abrasives for performance, health, and environmental benefits.
 

 
Waterjet Technology Association (WJTA)
 
Click to register today!
 
See the latest automated and handheld UHP waterblasting tools/systems/products. Exhibits, live demos, educational sessions, waterjet short course, networking.
 

 
SAFE Systems, Inc.
 
Portable Dust Collectors for Tough Environments
 
Trailer and skid-mounted models in numerous sizes, powered by electric and/or diesel. Sloped roofs, multiple dust inlets, high static, dampered fans. Lockable power & drive compartments.
 

 
SEMicro Division, M.E. Taylor Engineering, Inc.
 
Coatings Adhesion Testers
 
The PATTI® accurately measures the bond strength between coating & substrate. Outfitted properly, the surface can be rough, porous, or curved & >10K psi strong!
 

 
Aggreko
 
Dehumidification, Power and Temperature Control Rentals
 
Aggreko offers rental solutions for your painting/coating project. Dehumidifiers, cooling, heating, power and 24/7 service, nationwide.
844-433-9802
 

 
PreTox Products - NexTec, Inc.
 
GOT LEAD? Specify Pretox System products
 
The ONLY Lead Stabilizer Compatible with All Paint Removal Methods. Works with all Blast Media: Grits | Recyclable Abrasives | CO2 | Water | Power Tools | Etc. Call Dave Steffen at 800.338.8296.
 

 
Termarust Technologies
 
Termarust (HR CSA) Chemically Stops
Active Corrosion
 
Arch truss treated with Termarust's (HR CSA) in 2003. This steel arch bridge is rust free on all surfaces including the crevice corroded joints and connections.
 

 
PPG Protective and Marine Coatings Group
 
We Protect and Beautify the World
 
PPG is widely recognized as a world leader in protective and marine coatings, developing innovative, cutting-edge products and services.
 

 
Safway Services
 
Safeguard Assets. Ensure Productivity. HAKI®
 
Protect assets and equipment. Keep facilities open and operational. Maintain schedules regardless of weather. Ensure smooth and continuous production. Easy to erect. Safway is the primary distributor of HAKI® products including HAKISPAN and HAKITEC® 750 – in North America.
 

 
Jotun Paints Inc.
 
Jotachar JF750 - The Time Saving Solution
 
The only mesh free solution for jet fire scenarios. Jotachar saves installation time and material costs - the next generation of epoxy passive fire protection.
 

 
 
 

Technology Publishing Co., 1501 Reedsdale Street, Suite 2008, Pittsburgh, PA 15233

TEL 1-412-431-8300  • FAX  1-412-431-5428  •  EMAIL webmaster@paintsquare.com


The Technology Publishing Network

Durability + Design PaintSquare the Journal of Protective Coatings & Linings Paint BidTracker

 
EXPLORE:      JPCL   |   PaintSquare News   |   Interact   |   Buying Guides   |   Webinars   |   Resources   |   Classifieds
REGISTER AND SUBSCRIBE:      Free PaintSquare Registration   |   Subscribe to JPCL   |   Subscribe to PaintSquare News
MORE:      About PaintSquare.com   |   Privacy policy   |   Terms & conditions   |   Site Map   |   Search   |   Contact Us