June 17 - June 23, 2013
What are some ways to improve transfer efficiency of airless spray application?
More items for
Ken Beauvais of Self on
July 28, 2014:
Control the environment in which you are trying to coat.
Simon Hope of Bilfinger Salamis on
September 16, 2013:
Add to this, improvements can be made using air-assisted airless units for actual transfer performance. Also the use of plural pumps on jobs can reduce waste, particularly the heated units as this can improve pot life and quality of finish as well.
Keith Holdsworth of Eastern Tank on
September 12, 2013:
Heated airless spray technology increases transfer efficiency and reduces solvent consumption at the same time.
Atanas Cholakov of ACT on
June 17, 2013:
Coatings transfer efficiency varies significantly, depending on the surface complexity, geometry and size. You may want to consider masking (encapsulating) of the area if it involves field work. Use a skilled spray operator. Refer to the product data sheet of the paint supplier for information on pump pressure, correct spray tip, etc.
José Avendaño of Testers y Multimetros 2011 CA on
June 17, 2013:
Please sign in to submit your answer this question
Initially, we must select a right pump rate, gun and nozzle tip. During application, the painter must maintain an adequate distance from the surface, have good application technique (keeping the gun perpendicular to the surface and moving the hand at the correct speed). They should continuously monitor environmental conditions to avoid painting during high winds and excessive temperatures.
Current PSF Question
| Submit a PSF Question
| Full PSF Archive