| Connect Follow us on Twitter Like us on Facebook
About | Subscribe | Advertise


Get on-line education from the Pro Video Learning Series.

Problem Solving Forum

| More

January 14 - January 20, 2013

Is the MEK rub test a conclusive test to check the cure of IOZ coatings?

More items for Quality Control

Selected Answers

From Simon Hope of Bilfinger Salamis on January 16, 2013:
     MEK rub test is only subjective as proof of cure for IOZ coatings. The test is only valid for the actual area tested and can only be applied to the whole item by extrapolation of result. Confidence in the result can vary wildly, depending on time, humidity and temperature, as the curing mechanism of IOZ is totally dependent on the integration of water into the silicate precursor to create the matrix to support the metallic zinc. Hence, the best advice is that once touch dry, fresh water washing enhances the cure mechanism. High humidity and water washing will give confidence and MEK rub then gives verification.

From wenbo chen of International Paint on January 15, 2013:
     Though ASTM D 4752 describes a standard test method for measuring MEK resistance of IOZ by solvent rub, we always use a coin test in the field. The MEK test is more likely a lab test.

From Chuck Pease of MMI Tank on January 14, 2013:
     Not conclusive, as Dave mentioned. Only a estimation. This requirement is per ASTM D 4752.  Note that in the 4th paragraph, line 2, they call it an estimation.

From Dipesh Vyas of CARBOLINE on February 15, 2013:
     My field expereince reveals that the coin test is the best, easiest,quickest most and reliable test to verify curing of spray- applied IOZ film. The MEK rub test, if not performed by a skilled person, can have misleading  results because spray-applied IOZ always has some loose zinc dust ( overspray), and if not cleaned will react with MEK  In first 5 passes, only satin will be noticed .

From Tom Schwerdt of Texas Department of Transportation on January 22, 2013:
     Wenbo, the MEK rub is certainly a field test - all you need is a rag, MEK and a finger! (Okay, a glove would be nice to have, too.) The MEK rub is more conclusive than the coin test. The only truly conclusive test is in the lab - generally a force cure in a sealed vial, followed by gas chromatography.

From Dave Lisnock of Arizona State University W.P. Carey Facilities on January 14, 2013:
     No, it is not  a conclusive test. The only true test is a lab test.

From Tom Schwerdt of Texas Department of Transportation on February 19, 2013:
     Dipesh - how crisp is the edge of your coin? How much force are you using? At what angle are you holding the coin? The coin test is at least as variable (if not more so) than the MEK rub test.

Please sign in to submit your answer this question    

Tagged categories: Curing; Performance testing

Current PSF Question | Submit a PSF Question | Full PSF Archive

KTA-Tator, Inc. - Corporate Office

• Coating failure analysis
• Independent
  comparative testing
• Accelerated
  weathering testing
• Toxic metals testing
• A2LA Accredited
Contact: Kevin Brown,
at 336-386-4000

Fischer Technology Inc.
DUALSCOPE®FMP100 with DataCenter IP

Transfer customized inspection plans from PC to FMP100 using step-by-step guidance with prompts and pictures throughout the measurement procedure

DeFelsko Corporation
PosiTest Automatic Adhesion Tester

Electronically controlled hydraulic pump applies smooth and continuous pull-off pressure at user selectable rates. No twisting, pumping or cranking.

Elcometer, Inc.
Elcometer 266
DC Holiday Detector

Easily Finds Pinholes, Flaws & Thin Spots; Safer, More Reliable Testing; Voltage-Adjustable Keypad; Dual-Safety Switch On Handle.

HoldTight Solutions Inc.

Our HoldTight®102 salt remover & flash rust preventer prevents flash
rust by removing surface contaminants. It has no equal; only wannabees.
Contact us for your
nearest distributor.
(800) 319.8802

Modern Safety Techniques
Modern Safety Techniques

See our Low Temperature Catalyst for your CO removal needs. Help to provide your workers with safe, comfortable breathing air!

U.S. Zinc
Products. Customized With U.S.

Our plant can produce multiple grades of zinc dust. In fact, we offer the most comprehensive product line in the industry, including special additive blends.

Abrasives Inc.
Check our Prices for Blast Abrasives

Faced with higher abrasive costs? We invite you to call & check our rates on Black Magic® coal slag and other quality blast materials. Abrasives Inc. 800-584-7524

Axxiom Manufacturing
Schmidt Improves Conversion Kits

Schmidt's conversion kits turn out-of-date blast pots into high quality, efficient blasters. Quick, easy to install with step by step instructions.
Call 1-800-231-2085

Industrial Vacuum Equipment Corp.
Hurricane Vacuums
& Dust Collectors

Vacuum and dust collector hose, filters and related accessories.

Technology Publishing

The Technology Publishing Network

The Journal of Protective Coatings & Linings (JPCL) PaintSquare
Durability + Design Paint BidTracker

EXPLORE:      JPCL   |   PaintSquare News   |   Interact   |   Buying Guides   |   Webinars   |   Resources   |   Classifieds
REGISTER AND SUBSCRIBE:      Free PaintSquare Registration   |   Subscribe to JPCL   |   Subscribe to PaintSquare News
MORE:      About   |   Privacy policy   |   Terms & conditions   |   Site Map   |   Search   |   Contact Us

© Copyright 2000-2015, Technology Publishing / PaintSquare, All rights reserved
2100 Wharton Street, Suite 310, Pittsburgh PA 15203-1951; Tel 1-412-431-8300; Fax 1-412-431-5428; E-mail