PaintSquare.com


The First Word in Protective & Marine Coatings

A Product of Technology Publishing / PaintSquare
JPCL | PaintSquare News | Durability + Design | Paint BidTracker

Bridge Coating Systems: Selecting and Sourcing

Paint and Coatings Industry News

Main News Page


Adhesives Maker Fined $917K in Blast

Wednesday, September 14, 2011

More items for Health & Safety

Comment | More

Global sealant and adhesive giant Bostik Inc. faces 50 federal safety citations and $917,000 in fines for an explosion March 13 that injured four workers at a company chemical plant in Middleton, MA.

The explosion and four-alarm fire rocked the plant on a Sunday night, significantly damaging the facility. Nearby residents were urged to stay in their homes with doors and windows closed, but no evacuations were ordered. News reports said the blast was heard miles away.

 Bostik chemcial plant explosion
The blast was traced to two valves that were inadvertently left open, allowing vapors to ignite.

Four employees were treated at area hospitals and released by the next day.

Vapors Cited

Bostik preliminarily traced the blast to ignition of flammable vapors. “Findings point to a single instance in which two internal valves in an open position appear to have allowed flammable vapors to escape into the building and ignite when exposed to an internal ignition source,” the company said in a statement.

OSHA’s inspection confirmed that theory.

The plant’s general manager told WHDH-TV that he did not know what chemicals had been in use or what products were being manufactured at the time of the explosion.

However, the company did hire the environmental consulting firm GEI Consultants, Inc. (GEI) in January 2011 to investigate reports by two residents of odors in the area. GEI identified “slight intensity odors” associated with the plant in February but said they posed no health risk.

Willful Citations

The OSHA citations, detailed in two documents, identify numerous serious deficiencies in the company’s process safety management (PSM) program.

A PSM program details requirements and procedures employers must follow to proactively address hazards associated with processes and equipment that involve large amounts of hazardous chemicals. In the Bostik case, OSHA said, the chemical was acetone, used in a PSM-covered process known as direct solvation.

OSHA found that the process safety information for the solvation process was incomplete. The agency said that the employer’s analysis of hazards related to the process did not address previous incidents with a potential for catastrophic results, such as forklifts that struck process equipment; and did not address human factors such as operator error, communication between shift changes, and employee fatigue from excessive overtime.

In addition, OSHA said, the company did not ensure that a forklift and electrical equipment, such as a light fixture, switches and a motor, were approved for use in Class 1 hazardous locations where flammable gases or vapors are present.

As a result, OSHA issued Bostik an extraordinary nine willful citations, with $630,000 in proposed fines, for these conditions.  A willful violation is one committed with intentional knowing or voluntary disregard for the law’s requirements, or with plain indifference to worker safety and health.

Serious Violations

The 41 serious violations alleged by OSHA included:

• Storing 55-gallon drums of flammable liquid in exit areas;

• Lack of an emergency response plan;

• Uncontrolled use of electronic devices in the presence of flammable liquids and vapors after the explosion;

• Inadequate training and refresher training for first responders;

• Insufficient training in respirator and fire extinguisher use  for first responders;

• Hazards in electrical equipment;

• Inappropriate lighting for a hazardous location;

• Use of administrative controls, rather than engineering controls, to safeguard against catastrophic hazards;

• Outdated piping and instrument diagrams;

• Employees unaware of fire and explosion hazards; and

• Lack of many written procedures.

Company Response

In a prepared statement, Bostik said the OSHA findings were “undergoing careful study by the full Bostik team and our outside experts.”

Noting that OSHA has a defined process for contesting citations, Bostik said: “If deemed necessary and appropriate following our team’s study of the initial findings, Bostik is prepared to follow this process and seek review of the alleged citations consistent with our rights to do so.”

It added:  “Out of respect for the agency and the appeals process afforded to us by OSHA, we will issue no additional comment on the initial findings until the remainder of the process is complete.”

The company noted that the Middleton plant had been in operation since the late 19th century and that the explosion “arose from operations that are not performed at other Bostik locations in the United States. While we regret the incident, we are proud of the progress we have made in upgrading our Middleton facility fully consistent with the state of the art of our modern operations worldwide.”

‘High Stakes’

Dr. David Michaels, Assistant Secretary of Labor for OSHA, said that the requirements of OSHA's PSM standard “are stringent and comprehensive, because the stakes are so high. Failure to evaluate, anticipate, address and prevent hazardous conditions associated with a process can result in a catastrophic incident such as an explosion.”

Added Jeffrey A. Erskine, OSHA’s area director for northeastern Massachusetts: “In this case, Bostik knew from prior third-party and internal compliance audits conducted at the plant that aspects of its PSM program were incomplete or inadequate, and misclassified electrical equipment was in use. The company did not take adequate steps to address those conditions.”

Erskine added: “Luckily, the explosion happened when there were few workers in the plant. Otherwise, this incident could have resulted in a catastrophic loss of life.”

Bostik Inc. has 15 business days from receipt of the citations to comply, meet with OSHA’s area director or contest the findings.

Headquartered in Wauwatosa, WI, Bostik is part of Bostik S.A. based in France, one of the world’s largest manufacturers of adhesives and sealants. Bostik’s markets include construction adhesives, flooring installations, building components and marine.

   

Tagged categories: Adhesive; Chemical Plants; Construction; Explosions; Health and safety; OSHA; Regulations; Violations

Comment Join the Conversation:

Sign in to our community to add your comments.

Clemco Industries Corp.
Powerful Protection in a Small Package

Mounts inside blast helmet, alerts operator to dangerous breathing-air condition by audible, visual, and vibratory alarms. Easily calibrated, battery operated.


Bullard

The Next Generation
of Blasting

• Lightest
• Coolest
• Most Comfortable
• Most Dependable


ABKaelin, LLC
Quality is our bottom line

Services include:
• Environmental, Health &
  Safety
• Contractor QP Certification
• Quality Assurance Programs
  and Auditing
• SSPC C3/C5 and other
  Training
• Coatings
• Design/Construction
See our website at abkaelin.com or contact us today abkaelin@comcast.com


Blastox/The TDJ Group, Inc.
Blastox - One Step
Lead Abatement

Don't waste $$ on added labor steps with other methods. Don't mix, meter or apply at the job-site. Avoid strict hazardous waste rules.
Let your painters paint!


Novatek Corporation
Dustless Coatings Removal

Strip it, clean it, and profile it,
all dust free! High production
rates and Blast like finishes.
Comply with new lead
standards.


LS Industries
LS Blasters: Optimum Steel Cleaning Efficiency

Simplify surface prep with the precise shot control of LS Blasters. Our blast technology delivers optimum coverage and finish. 800-533-8008


CS Unitec
Surface Prep & Material Removal

CS Unitec’s Floor Planers remove coatings & corrosion from concrete & metal surfaces. Produce keyed profiles for waterproofing applications. info@csunitec.com

 
 
 
Technology Publishing

The Technology Publishing Network

The Journal of Protective Coatings & Linings (JPCL) PaintSquare
Durability + Design Paint BidTracker JPCL Europe

 
EXPLORE:      JPCL   |   PaintSquare News   |   Interact   |   Buying Guides   |   Webinars   |   Resources   |   Classifieds
REGISTER AND SUBSCRIBE:      Free PaintSquare Registration   |   Subscribe to JPCL   |   Subscribe to PaintSquare News
MORE:      About PaintSquare.com   |   Privacy policy   |   Terms & conditions   |   Site Map   |   Search   |   Contact Us
 

© Copyright 2000-2014, Technology Publishing / PaintSquare, All rights reserved
2100 Wharton Street, Suite 310, Pittsburgh PA 15203-1951; Tel 1-412-431-8300; Fax 1-412-431-5428; E-mail webmaster@paintsquare.com