| Connect Follow us on Twitter Like us on Facebook
About | Subscribe | Advertise


Free Download of our eBook on Overcoating Bridges and Other Structures

Paint and Coatings Industry News

Main News Page

PPG Unveils Solvent-Free Tank Linings

Tuesday, May 31, 2011

More items for Coating Materials

Comment | More

PPG Protective & Marine Coatings has introduced two veteran solvent-free tank linings to the North American market and launched a third for the emerging fuels market.

As PPG’s Dr. Robyn McMillan explains, NovaGuard 840, NovaGuard 890 and SigmaGuard are solvent-free technologies designed to provide corrosion, solvent and chemical resistance as well as exceptional pit filling and tank bottom repair.

NovaGuard 840

NovaGuard 840 tank coating combines the broad chemical resistance of phenolic, Novolac epoxy systems with the environmental advantages of a solvent-free product.

PPG says 840 is useful for a wide range of tank storage products, including chemicals, solvents, crude oil (up to 90°C/194°F) and refined fuels. The coating is also approved to Air BP F2D2 section 2.1 for storage of jet fuels.

NovaGuard 840, NovaGuard 890 and SigmaGuard

NovaGuard 840 can be applied as a one- or two-coat system with a total dry-film thickness as low as 300 microns/12 mils per coat. Application is by standard single feed airless spray and brush or roll for repair and stripe coating.

NovaGuard 890

NovaGuard 890 is a solvent-free, phenolic, Novolac epoxy tank lining that meets the latest chemical resistance requirements of the petrochemical industry, including all levels of ethanol in blends of gasoline and biodiesel grades.
The new coating is designed to address the needs of today’s petrochemical industry and its emerging fuel trends, including:

• Widespread use of ethanol as an oxygenate in gasoline:

• Increased use of biodiesel as a clean-burning alternative fuel; and

• Growing use of biodiesel and (bio) ethanol.

NovaGuard 890 is designed for application by standard airless spray equipment. It can be used for both new tank lining and major refurbishment of old tanks, including tank bottom repair as a reinforced lining.

Both NovaGuard products have a glossy finish, for easy cleaning and inspection, PPG says.

SigmaGuard CSF 650

A fixture of the petrochemical industry for 20 years, but new to North America, SigmaGuard CSF 650 is a solvent-free, single-coat, amine-cured epoxy tank lining.

Just one coat is required to provide protection for storage tanks holding crude oil (up to 60°C/140°F), aliphatic petroleum products, and a wide variety of chemicals, according to PPG.

This solvent-free formulation minimizes application hazards, and the coating is appropriate for lining new tanks and refurbishing old ones. In addition, the smooth, glossy finish enables easier cleaning and inspection.

SigmaGuard CSF 650 provides corrosion control, meets the requirements of Mil-C-4556E for resistance against aircraft fuel and fuel degradation, and is approved to Air BP for storage of jet fuels.

PPG says tanks lined with SigmaGuard CSF 650 have been opened and inspected 15 years after application and show no degradation, blistering or softening.

Reinforcement, Resistance

All three coatings can also be reinforced by chopped fiber glass or fiber glass mat.

An extended chemical resistance list for all three products can be found at TankSelect.

More information:


Tagged categories: Corrosion resistance; Linings; PPG; Protective coatings; Solvent-free coatings; Tank interiors

Comment Join the Conversation:

Sign in to our community to add your comments.

Polyval Coatings
Polyflex® Polyurea Linings

Polyflex™ new Polyurea Geotextile Membrane System has been specifically engineered to protect the environment in containment applications.

Wasser High-Tech Coatings Inc.
Wasser Coatings Protect

Wasser Coatings offer a complete range of Moisture Cure Urethane (NEPCOAT approved) systems in addition to Polyurea membranes and linings(NSF).

Jessup Manufacturing Company
More Traction for Extreme Marine Conditions

Jessup Safety Track® 3800 Military Grade peel-and-stick non-skid tapes and treads provide extra slip resistance for decks. MIL-PRF-24467C Type XI, Black & Gray.

Sherwin-Williams Protective & Marine Coatings

With 4,000 distribution points and 3,700+ years of experience, Sherwin-Williams delivers the products, support and expertise you need, right where you need it.

New resins from BASF will have metals loving water:

Excellent corrosion resistance, low VOC, high gloss, thin films

SSPC: The Society for Protective Coatings

Join SSPC and Enhance
Your Career !

Thermion Inc
Buy Back Program

We are offering $5,000
credit for your old Model
This drive system is
being discontinued by
the manufacturer.
More information at

Chicago Corrosion Group

Rust Buddy Solidifier

Stops Rust With A Brushstroke.
No Surface Prep Required.

Built for Tough Jobs

From Epoxies to Urethanes to other high solid coatings, the new Binks Airless 75 delivers a great finish using an ergonomic design. Visit for more information.

Carboline Company
Fireproofing Solutions

Pyroclad® X1 Thermo-Lag® Pyrocrete® – protecting against hydrocarbon and jet fires, explosions, and cryogenic spills.

Technology Publishing

The Technology Publishing Network

The Journal of Protective Coatings & Linings (JPCL) PaintSquare
Durability + Design Paint BidTracker

EXPLORE:      JPCL   |   PaintSquare News   |   Interact   |   Buying Guides   |   Webinars   |   Resources   |   Classifieds
REGISTER AND SUBSCRIBE:      Free PaintSquare Registration   |   Subscribe to JPCL   |   Subscribe to PaintSquare News
MORE:      About   |   Privacy policy   |   Terms & conditions   |   Site Map   |   Search   |   Contact Us

© Copyright 2000-2015, Technology Publishing / PaintSquare, All rights reserved
2100 Wharton Street, Suite 310, Pittsburgh PA 15203-1951; Tel 1-412-431-8300; Fax 1-412-431-5428; E-mail