PaintSquare.com


The First Word in Protective & Marine Coatings

A Product of Technology Publishing / PaintSquare
JPCL | PaintSquare News | Durability + Design | Paint BidTracker

Bridge Coating Systems: Selecting and Sourcing

Paint and Coatings Industry News

Main News Page


3M’s New N95 Respirator Designed for Comfort

Wednesday, December 22, 2010

Comment | More

3M Particulate Respirator 9211

3M’s new Particulate Respirator 9211 is designed for optimum comfort while performing grinding, sanding, sweeping, bagging and other operations that create dust.

The respirator features a low-profile collapse-resistant design, 3M’s patented Cool Flow Exhalation Valve, and a soft nose foam pad. Respirators are individually packaged to improve convenience and to help prevent contamination during storage.

Product Features

According to 3M, the respirator allows for a good field of vision, is compatible with protective eyewear, and fits a wide range of face sizes.

The low profile allows improved visibility and is compatible with a wide range of safety equipment, while the Cool Flow Exhalation Valve is positioned for cool, easy breathing, the company says.

3M 9200 Series respirators also feature a soft web on the inner panels to improve comfort against the skin. Wide headbands provide a comfortable and secure face seal, according to 3M. This respirator contains no components made from natural rubber latex.

Usage Warnings, Notes

Uses would also include solids such as those from textile operations, dry chemical handling, surface preparation, processing of minerals, and certain other substances.

The respirators are not to be used for gases and vapors, including those present in paint spraying operations, oil aerosols, asbestos or sandblasting; or for aerosol concentrations that exceed 10 times the OSHA PEL, or applicable government regulations, whichever is lower. This respirator does not supply oxygen. If the respirator becomes damaged or soiled, or if breathing becomes difficult, users should leave the contaminated area and replace the respirator.

Before use of this respirator, a written respirator protection program must be implemented meeting all the requirements of OSHA 29 CFR 1910.134 such as training and fit testing, 3M notes.

More information: www.shop3M.com or call 1-800-646-1655 and request document number 3055 or 3056.

   

Tagged categories: 3M; Health and safety; Respirators; Surface preparation

Comment Join the Conversation:

Sign in to our community to add your comments.

Clemco Industries Corp.
Powerful Protection in a Small Package

Mounts inside blast helmet, alerts operator to dangerous breathing-air condition by audible, visual, and vibratory alarms. Easily calibrated, battery operated.


Absolute Equipment/Grand Rental Station
Portable Power from Absolute Equipment

•Compressors
•Lighting Systems
•Generators
•Light Compaction
Sales • Rental • Service
Call 1-866-931-6655
Over a century of
providing excellence.


Abrasives Inc.
Check our Prices for Blast Abrasives

Faced with higher abrasive costs? We invite you to call & check our rates on Black Magic® coal slag and other quality blast materials. Abrasives Inc. 800-584-7524


Blastox/The TDJ Group, Inc.
Blastox - One Step
Lead Abatement

Don't waste $$ on added labor steps with other methods. Don't mix, meter or apply at the job-site. Avoid strict hazardous waste rules.
Let your painters paint!


LS Industries
LS Blasters: Optimum Steel Cleaning Efficiency

Simplify surface prep with the precise shot control of LS Blasters. Our blast technology delivers optimum coverage and finish. 800-533-8008


Novatek Corporation
Dustless Coatings Removal

Strip it, clean it, and profile it,
all dust free! High production
rates and Blast like finishes.
Comply with new lead
standards.


Minerals Research & Recovery
PREMIUM SLAG ABRASIVES

Visit mrrinc.com. In surface preparation tests run for NIOSH by an independent company, Sharpshot® was shown to be the best slag abrasive for cutting speed and cost per sq. ft.
Call Steve: 520-297-4626

 
 
 
Technology Publishing

The Technology Publishing Network

The Journal of Protective Coatings & Linings (JPCL) PaintSquare
Durability + Design Paint BidTracker JPCL Europe

 
EXPLORE:      JPCL   |   PaintSquare News   |   Interact   |   Buying Guides   |   Webinars   |   Resources   |   Classifieds
REGISTER AND SUBSCRIBE:      Free PaintSquare Registration   |   Subscribe to JPCL   |   Subscribe to PaintSquare News
MORE:      About PaintSquare.com   |   Privacy policy   |   Terms & conditions   |   Site Map   |   Search   |   Contact Us
 

© Copyright 2000-2014, Technology Publishing / PaintSquare, All rights reserved
2100 Wharton Street, Suite 310, Pittsburgh PA 15203-1951; Tel 1-412-431-8300; Fax 1-412-431-5428; E-mail webmaster@paintsquare.com