| Connect Follow us on Twitter Like us on Facebook
About | Subscribe | Advertise


Download our free ebook on Abrasive Blast Cleaning

Paint and Coatings Industry News

Main News Page

NY Contractor Killed in DuPont Plant Blast

Wednesday, November 10, 2010

Comment | More

Federal, state and local authorities are investigating a baffling tank explosion that has killed one worker and injured another at a DuPont plant in Western New York.

The explosion of the 10,000-gallon empty tank occurred about 10:45 a.m. Tuesday (Nov. 9) at the DuPont Yerkes Plant in Tonawanda, NY, and was felt a mile away, authorities said.

Richard Folaron, 57, a father of four from South Wales, NY, was killed instantly.

William Freeburg, about 50 years old, of Angola, NY, was reported in stable condition Wednesday (Nov. 10) at a local hospital.

Freeburg suffered superficial facial burns, but officials remain concerned about his hearing and vision, because he was so close to the blast.

Maintenance Underway

Both men worked for Mollenberg-Betz Mechanical Contractors, a third-generation family operation in Buffalo. The company marked its centennial in September and, until now, had never had a fatality.

Folaron was welding a bracket on top of the tank about 20 feet up when the blast occurred, said Jim Camarre, the company’s CFO and VP of Finance.  Freeburg was on the ground; it is not clear what he was doing.

The tank had recently been cleaned, inspected, taken out of service and was undergoing maintenance, DuPont said in a company statement.

“While workers were welding equipment connected to the tank, an explosion took place which resulted in the injuries,” the statement said. “The incident was limited to the equipment that was being worked on, and the process involved has been shut down.”

The plant was not evacuated, no vapors were released, and all other employees were safe, DuPont said. The plant, built in 1921, manufactures Corian and a polyvinyl fluoride film used for covering applications. It employs more than 700 people.

‘The Last Place We Expected This’

Authorities are baffled by the explosion, which involved a permitted job, experienced contractors, and two companies with sterling safety records. The incident is under investigation by the Occupational Safety and Health Administration, local police and fire officials, and the New York Department of Environmental Conservation.

OSHA Area Director Art Dube confirmed that the tank was completely vacuumed out two weeks ago and said the project had all of the proper permits. The DuPont facility has “an excellent safety record,” Dube added.

Camarre agreed, saying his company had worked with DuPont for more than 20 years. “DuPont is probably the hardest company in Western New York to work for,” Camarre said. “They’re a very safety-conscious facility. So this was the last place we expected this to happen.”

Freeburg’s wife told Camarre that Freeburg occasionally grumbled about DuPont’s relentless safety requirements, Camarre said.

“All safety procedures that were supposed to be followed were followed, but obviously the tank they were working on exploded, so something went wrong somewhere,” he said.

OSHA-Recognized Contractor

Mollenberg-Betz is an OSHA Voluntary Protection Program employer. VPP employers have met rigorous performance-based criteria for a managed safety and health system. The program includes onsite evaluations.

Mollenberg-Betz is one of just 46 employers nationwide with OSHA VPP “Merit” status.

Folaron had worked for Mollenberg-Betz for 15 years and had more than 30 years of experience. Freeburg has worked there for more than 25 years.

Chemical Connection?

DuPont spokesman David A. Hastings told the Buffalo News that the tank previously held a chemical known as polyvinyl fluoride, or PVF, in slurry form. The chemical is used as a protective coating for solar panels and is a powder in its final form, Hastings said.

Dube, of OSHA, speculated in published reports that “probably a little bit of some unknown material [was] left in the tank."

Mike Stratton, the Assistant Director for OSHA in Buffalo, told reporters, “It is an organic chemical; it does give off flammable vapors."

DuPont said it was “cooperating fully” in the external investigations and conducting one of its own.


Tagged categories: Accidents; DuPont; Fatalities; Health and safety; Tank interiors

Comment from Russell Woodall, (11/11/2010, 7:40 AM)

We have and do work at Dupont Charleston SC. The safety procedures are extremely strict. My prayers go out to the families involved.

Comment from Victor Manuel Isidro Espinoza, (11/11/2010, 10:06 AM)

This event teaches us that we must be careful even as you follow proper safety procedures. A small mistake can be fatal. I send my deepest condolences to the families affected.

Comment from Alberto Castilleja, (11/11/2010, 10:33 AM)

En la practica que tenemos durante masde 30 anos trabajando con las plantas de Dupont, siempre hemos observado y se nos ha exigido un alto grado de seguridad, en este caso pensamos que sea una probable reaccion entre el abrasivo usado con el sandblasting, el sustrato de acero y el tipo de recubrimiento aplicado, ya que ocacionalmente la carga de carbono del acero llega a alterar las condiciones de reaccion quimica, sentimos mucho el fatal accidente y nos unimos al dolor de su familia.

Comment from Lubomir Jancovic, (11/11/2010, 11:21 AM)

That point gives a chance for everybody to think about reality and paperwork about safety regulations. I was working the last two years for a company which had 80 years working with all safety regulations through OSHA regulations, but I know a minimum of one guy died over there from lung cancer because he must have been working like that. I was hurt a lot in this job, because sometimed I was pushed to work in a dangerous work area. Maybe all it is about money ????

Comment from Tom Cahill, (11/11/2010, 2:30 PM)

Reading Mr. Alberto Castilleja's thoughful and useful commentary in Spanish: I have translated it (inadequately, I am sure) for our English speakers. We have been working at DuPont plant sites for more than 30 years. It is our experience that DuPont enforces very strict safety standards. In this case I think the explosion may have been caused by a reaction between the abrasive used in sandblasting, the substrate steel and the type of coating applied, and that occasionally the carbon component of steel causes conditions that creates an explosive chemical reaction in this context. We are deeply saddened by this fatal accident and we extend our sincerest condolences to the families in their terrible grief.

Comment Join the Conversation:

Sign in to our community to add your comments.

SSPC: The Society for Protective Coatings

Join SSPC and Enhance
Your Career !

Nationwide Overspray
Profession Overspray Removal Services

The Finest Name in Safe Overspray Removal. We specialize in removing all contaminants from any surface. Family Owned and Operated for 33 years! Fully insured. Satisfaction is guaranteed.

Corrosion Probe, Inc.
From Detection to Correction

Corrosion Probe, Inc. has the Most Concrete Coatings Experience and Expertise. Contact us today at

Blastox/The TDJ Group, Inc.
Blastox - One Step
Lead Abatement

Don't waste money on added labor steps with other methods. Don't mix, meter or apply at the job-site. Avoid strict hazardous waste rules.
Let your painters paint

Sherwin-Williams Protective & Marine Coatings

With 4,000 distribution points and 3,700+ years of experience, Sherwin-Williams delivers the products, support and expertise you need, right where you need it.

CS Unitec
Work Cleaner and Safer

CS Unitec’s Vibro-Lo low-vibration scalers offer high performance for greater productivity & improved operator comfort. Optional dust shroud.

Novatek Corporation
Dustless Coatings Removal

Strip it, clean it, and profile it,
all dust free! High production
rates and Blast like finishes.
Comply with new lead

Sidewinder/Persyst Enterprises, Inc.
The Sidewinder Model M2 Solvent Recycler

Combat the rising cost of gunwash, thinners, acetone & more while drastically reducing waste disposal coat.

Mitsubishi Gas Chemical America
Performance Amine 1,3-BAC

A highly reactive cycloaliphatic diamine offering superior performance. Reasonable cost and curing efficacy makes it suitable for all types of epoxy resin applications.

Elcometer, Inc.
Elcometer 266
DC Holiday Detector

Easily Finds Pinholes, Flaws & Thin Spots; Safer, More Reliable Testing; Voltage-Adjustable Keypad; Dual-Safety Switch On Handle.

Technology Publishing

The Technology Publishing Network

The Journal of Protective Coatings & Linings (JPCL) PaintSquare
Durability + Design Paint BidTracker

EXPLORE:      JPCL   |   PaintSquare News   |   Interact   |   Buying Guides   |   Webinars   |   Resources   |   Classifieds
REGISTER AND SUBSCRIBE:      Free PaintSquare Registration   |   Subscribe to JPCL   |   Subscribe to PaintSquare News
MORE:      About   |   Privacy policy   |   Terms & conditions   |   Site Map   |   Search   |   Contact Us

© Copyright 2000-2015, Technology Publishing / PaintSquare, All rights reserved
2100 Wharton Street, Suite 310, Pittsburgh PA 15203-1951; Tel 1-412-431-8300; Fax 1-412-431-5428; E-mail