*Easy to use and only pennies
per square foot
*Works with poor quality
*Use for mist blasting, vapor
blasting, wet blasting and
*Leaves no residue and
provides excellent adhesion.
Novatek Corporation, Dustless Coatings Removal
Strip, clean and profile all dust free!
Comply with new lead standards.
Contact today: (866) 563-7800
The MBX Bristle Blaster
Get a 2.7 to 3.3 mil profile and a
Near White Metal Clean.
For info visit www.mbxit.com
or call 877 629-8777
Termarust (HR CSA) Chemically Stops
Truss bridge treated in 2000 with Termarust's (HR CSA) field-proven rust mitigation system chemically stopped corrosion, crevice corrosion & pack rust.
By integrating Schmidt's
Aftercoolers with our blast pots, these systems remove moisture from air and minimize equipment footprint on jobsite.
Coatings Adhesion Testers
The PATTI® accurately measures the bond strength between coating & substrate. Outfitted properly, the surface can be rough, porous, or curved & >10K psi strong!
NO FLASH RUST -
Our HoldTight®102 salt remover & flash rust preventer prevents flash rust by removing surface contaminants. It has no equal; only wannabees.
Contact us for your
(800) 319.8802 email@example.com
Extend the life of your generation, transmission, and distribution systems by learning how to integrate corrosion control into your asset management plan.
Blastox - One Step
Don't waste money on added labor steps with other methods. Don't mix, meter or apply at the job-site. Avoid strict hazardous waste rules.
Let your painters paint