ARMEX is The Only Choice
When removing coatings & cleaning substrates that cannot be damaged the only blasting abrasive to use is ARMEX. ARMEX for when Non-Destructive Cleaning is Critical.
The MBX Bristle Blaster
Get a 2.7 to 3.3 mil profile and a
Near White Metal Clean.
For info visit www.mbxit.com
or call 877 629-8777
ADVANCED RECYCLING SYSTEMS (ARS)
Recycling Machines, Dust Collectors,
Rapid Deployment units are time-tested
and approved for the rugged industrial
environment. Contact ARS today!
NO FLASH RUST - NO CONTAMINANTS
Our HoldTight®102 salt remover & flash rust
preventer prevents flash
rust by removing surface contaminants. Contact us
(800) 319.8802 firstname.lastname@example.org
Humidity & Temperature Control Equipment
Rental Desiccant Dehumidifiers, ArcticDRY Units, Air Conditioners, Heaters and Generators to help control the climate on your next industrial painting project. Nationwide locations, 24/7 service: (866) 379-2600 www.drycogroup.com”
Schmidt's VBS System reduces blowdown intensity, prevents exhaust from damaging floor while using no screens or filters.
Reduces sound; Increasing safety.
Blasting with BARTON Garnet - Video
Watch now to see how BARTON garnet abrasives outperform other blast media in key areas.
Dustmaster® 6,000 CFM Dust Collector
This 2-piece design has a 6,000 CFM maximum flow rate, 15HP, 3-Phase Electric Motor, and single 16" I.D. duct inlet provide the widest CFM range in its class. Available for purchase or rent.