ARMEX is The Only Choice
When removing coatings & cleaning substrates that cannot be damaged the only blasting abrasive to use is ARMEX. ARMEX for when Non-Destructive Cleaning is Critical.
Blast Room Secrets!
25 Critical components to assess before spending a dime on a blast room! Free for a limited time. Download here.
Termarust (HR CSA) Chemically Stops
Truss bridge treated with Termarust's (HR CSA) in 1995. This highway & rail truss bridge is still stable and there still is no active corrosion.
Dustmaster®18,000 CFM Dust Collector
A 18,000 CFM maximum air flow rate, 97 HP, Tier III Diesel Engine, and four 20” I.D. duct inlets provide the widest CFM range in its class. Available for purchase or rent.
ADVANCED RECYCLING SYSTEMS (ARS)
Recycling Machines, Dust Collectors,
Rapid Deployment units are time-tested
and approved for the rugged industrial
environment. Contact ARS today!
Bayer MaterialScience is now Covestro.
The pioneering spirit of our first 150 years will drive the bold vision of our next 150: to develop the industry’s most innovative coatings solutions.
East Coast Shipyard Cut Blasting Costs 30% with BARTON
A comparison trial convinced this shipyard that they could realize significant savings by switching to Barton® garnet instead of coal or copper slag.
Watch the video now.
Humidity & Temperature Control Equipment
Rental Desiccant Dehumidifiers, ArcticDRY Units, Air Conditioners, Heaters and Generators to help control the climate on your next industrial painting project. Nationwide locations, 24/7 service: (866) 379-2600 www.drycogroup.com”