ARMEX is The Only Choice
When removing coatings & cleaning substrates that cannot be damaged the only blasting abrasive to use is ARMEX. ARMEX for when Non-Destructive Cleaning is Critical.
ENGINEERING SOLUTIONS, NOT EXCUSES
See our website for features of our best seller,
the ADI 3500CFM 4-Pot Blast Vacuum Recycler. A smaller
package with all the ADI power you need.
Premium Low VOC Polyurethane Finish
AkzoNobel introduces Interthane 990V as a 250 g/l HAPS free polyurethane with outstanding
color and gloss retention. 990V is fast curing and applicator friendly.
Termarust (HR CSA) Chemically Stops
Hydro Utility Penstock Overcoated in 1997. Was power washed and overcoated with major cost saving. No environmental impact with Termarust's low LC50 of 41,007 ppm.
NO FLASH RUST -
Our HoldTight®102 salt remover & flash rust preventer prevents flash rust by removing surface contaminants. It has no equal; only wannabees.
Contact us for your
(800) 319.8802 email@example.com
Blast Room Secrets!
25 Critical components to assess before spending a dime on a blast room! Free for a limited time. Download here.
Dustmaster®8,000 CFM Dust Collector
An 8,000 CFM maximum air flow rate, 50 HP, Tier 4i Diesel Engine, and two 16” I.D. duct inlets provide the widest CFM range in its class. Available for purchase or rent.