ARMEX is The Only Choice
When removing coatings & cleaning substrates that cannot be damaged the only blasting abrasive to use is ARMEX. ARMEX for when Non-Destructive Cleaning is Critical.
Humidity & Temperature Control Equipment
Rental Desiccant Dehumidifiers, ArcticDRY Units, Air Conditioners, Heaters and Generators to help control the climate on your next industrial painting project. Nationwide locations, 24/7 service: (866) 379-2600 www.drycogroup.com”
NO FLASH RUST - NO CONTAMINANTS
Our HoldTight®102 salt remover & flash rust
preventer prevents flash
rust by removing surface contaminants. Contact us
(800) 319.8802 firstname.lastname@example.org
Dustmaster®8,000 CFM Dust Collector
An 8,000 CFM maximum air flow rate, 50 HP, Tier 4i Diesel Engine, and two 16" I.D. duct inlets provide the widest CFM range in its class. Available for purchase or rent.
& Dust Collectors
Vacuum and dust collector hose, filters
and related accessories.
Termarust (HR CSA) Chemically Stops
Hydro Utility Penstock Overcoated in 1997. Was power washed and overcoated with major cost saving. No environmental impact with Termarust's low LC50 of 41,007 ppm.
CLICK TO SEE...
what we did to this machine!
Let ADI upgrade your machine, extending
the life, efficiency, and value. Any make.
Like new, but better!
Fix it once and Forget it
Most protective coatings fail when concrete cracks. Not CIM. It stays flexible to bridge cracks in concrete and provides long term protection for your tank.