HIGH PERFORMANCE ABRASIVES
“Made in the USA!”
Why recycle waste from other countries? Go FASTER, CLEANER, at 1/3 THE COST with
MR&R “All-American” Sharpshot®HP!!
WATCH THE VIDEO
By integrating Schmidt's
Aftercoolers with our blast pots, these systems remove moisture from air and minimize equipment footprint on jobsite.
Number 1 Crushed Glass Abrasive in America!
6 NEW plants coast to coast! Safe for environment, 100% recycled glass. White Metal Finish!
No unsafe toxins like Beryllium & Arsenic!
Rust Buddy Solidifier
Stops Rust With A Brushstroke.
No Surface Prep Required.
Any structure, any height, any place -
A qualified coatings inspector is
SIMPLY the BEST
In Wet Abrasive Blasting
Automated controls simplify operation. 100lb. media capacity & enclosed water tank, for hours of continuous blasting. Dry weight of 350 lbs. & 150 psi capable.
High Temperature White Paint
New Coating with not yellow, remains white and will withstand temperatures up to 1,200ºF
NO FLASH RUST -
Our HoldTight®102 salt remover & flash rust preventer prevents flash
rust by removing surface contaminants. It has no equal; only wannabees.
Contact us for your
(800) 319.8802 firstname.lastname@example.org
Rapid cure, high temperature lining
AkzoNobel introduces Enviroline 405HTR, an ultra-low VOC lining. 405HTR offers rapid return to service, and excellent chemical resistance at high temperatures.
ARMEX when nondestructive cleaning is critical
The gentle physical propriety of baking soda but yet aggressive cleaning ability is what makes ARMEX the only choice for nondestructive abrasive blasting.