PosiTector Inspection Kits
PosiTector 6000 Coating Thickness Gage easily
converts to a surface profile gage, dew point meter or
ultrasonic wall thickness gage with a simple probe change
US Minerals -
With nationwide production and distribution capabilities, U.S. Minerals supplies a complete range of coal slag and other abrasives to meet all of your blasting needs.
SSPC C3 & C5 TRAINING
QUALITY PROGRAM/CERTIFICATION SUPPORT – ISO,NQA-1, AISC SSPC QP and QS.
MONITORING-Environmental and worker monitoring
CONSULTING & INSPECTION – Coatings, EHS, and compliance.
BRISTLE BLASTER® - THE ORIGINAL ONE
Surface cleanliness of SSPC-10 | Anchor profile
up to 4.7 mils | Removes corrosion & coatings |
ATEX approved for zone 1
| www.monti.com | 832-623-7970
Remove Rust, Paint and More!
Remove coatings, corrosion & produce keyed surfaces with CS Unitec's floor planers. 8" & 10" cutting width. Gas, air & electric models. email@example.com
By integrating Schmidt's
Aftercoolers with our blast pots, these systems remove moisture from air and minimize equipment footprint on jobsite.
Coatings Adhesion Testers
The PATTI® accurately measures the bond strength between coating & substrate. Outfitted properly, the surface can be rough, porous, or curved & >10K psi strong!
Termarust (HR CSA) Chemically Stops
Truss bridge treated with Termarust's (HR CSA) in 1995. This highway & rail truss bridge is still stable and there still is no active corrosion.
What keeps contractors one layer ahead when finishing their projects?
The answer: Pasquick®. Thanks to Pasquick®, one layer of coating is saved – resulting in faster workflows and earlier project finishing. Learn more.
DH Tech has the most innovative and
reliable equipment available to
IT'S UNDER CONTROL!