PaintSquare.com
Follow us on Twitter Follow us on LinkedIn Like us on Facebook Follow us on Instagram Visit the TPC Store
Search the site

 


JPCL November 2009

 
JPCL November 2009

Investigating Corrosion Protection of Offshore Wind Towers, Part 3: Results of the Laboratory Investigations

by Andreas W. Momber, Ph.D., Muehlhan AG; Peter Plagemann, Ph.D., and Volkmar Stenzel, Ph.D., Fraunhofer Institute for Manufacturing and Applied Materials Research; and Michael Schneider, Ph.D., Fraunhofer Institute for Ceramic Technologies and Systems

In Part 3 of a three-part series, the authors report on corrosive stress on offshore wind towers. Laboratory investigations of several coatings for wind towers are discussed and compared with site testing of the same coatings.


PACE Moves West for 2010

PACE 2010 will take place February 7-10, 2010, in Phoenix, AZ. Get a head start this month with SSPC course previews and a list of exhibitor descriptions known to JPCL at press time. Stay tuned for the full PACE preview in the December 2009 issue.


Test Method for the Estimation of the IMO PSPC "Walk-On Time" for Ballast Tank Coatings

by Serafin Barreiro, Hempel A/S, Kgs.

The author reports on a laboratory study intended to devise an appropriate test method to determine the walk-on time for several ballast tank coatings. The study came in response to the International Maritime Organization's new Performance Standard for Protective Coatings for Dedicated Seawater Ballast Tanks, which now requires walk-on times to be included in job specifications.


Plus...


Editorial

Editorial: What Is Really Important

by Bill Shoup, Executive Director, SSPC


Regulation News

Regulation News: Defendants in Painters' Deaths Get Extension

by Karen A. Kapsanis, JPCL


News

Association, company, and product news


Project Preview


Top Of The News

Q-Lab VP dies; was leader in testing


Problem Solving Forum

Problem Solving Forum: Checking Abrasives in the Field

Many SSPC and ISO standards can be used in the laboratory to check the quality of abrasives, including particle size, moisture content, and contamination. However, what are the most important quality checks to be carried out in the field when using new abrasive?


Case History

Case History: Copper Mine Gets New Support

by David E. Snider and Heather M. Ramsey, Sauereisen Inc.


F-Files: Mechanisms of Failure

Cases from the F-Files: Coating Failures on Galvanized Mast Arms

by Paul Vinik, MSChE, P.E., Florida Department of Transportation and Richard A. Burgess, B.S. , M.S., KTA-Tator, Inc.


From the Offices of SSPC

SSPC News

Vulcan painters achieves historic first


   
Advertisements
 
Harsco
 
Find BLACK BEAUTY® Abrasives
 
Use our online tool to search by address, city or zip code to find where you can buy BLACK BEAUTY® abrasives. Or call us toll free: 1-888-733-3646
 

 
Atlantic Design, Inc.
 
CLICK HERE
 
to see what we did to this dust collector! ADI can increase the efficiency and life of your equipment! Any brand, for less than new! 866.Call.ADI
 

 
NLB Corporation
 
NLB Sure Shroud: Greater Protection and Flexibility
 
NLB’s Sure Shroud’s lighter weight and flexibility reduces operator fatigue and offers unmatched protection against high pressure hose ruptures. 10k to 40k psi rated.
 

 
KTA-Tator, Inc. - Corporate Office
 
KTA Online
Instrument Catalog
 
• Any Manufacturer
• Any Instrument
• Any Time
Visit www.ktagage.com
Or call 800-582-4243
 

 
Carboline Company
 
Fireproofing Solutions
 
Pyroclad® X1 Thermo-Lag® Pyrocrete® – protecting against hydrocarbon and jet fires, explosions, and cryogenic spills.
 

 
HoldTight Solutions Inc.
 
NO FLASH RUST - NO CONTAMINANTS
 
Our HoldTight®102 salt remover & flash rust
preventer prevents flash
rust by removing surface contaminants. Contact us
for your nearest distributor.
(800) 319.8802 sales@holdtight.com
 

 
Advanced Recycling Systems
 
ADVANCED RECYCLING SYSTEMS (ARS)
 
Recycling Machines, Dust Collectors, Rapid Deployment units are time-tested and approved for the rugged industrial environment. Contact ARS today!
(330)536-8210
 

 
Monti Tools, Inc.
 
BRISTLE BLASTER® – THE ORIGINAL ONE
 
  • Abrasive blast with a power tool
  • Remove corrosion, mill scale and coatings
  • Cleans & roughens
  • Meets SSPC-SP 10 / NACE No. 2
  • Profile up to 4.7 mils
  • ATEX Zone 1
  •  

     
    Blastox/The TDJ Group, Inc.
     
    Blastox® - One Step Lead Abatement
     
    Sandblast additive delivered to jobsite pre-blended to eliminate hazardous abrasive wastes. Why mix, meter or apply at the job-site? Blast with ease and
    Let your painters paint!
    1(800)-252-7869
     

     
    Aggreko
     
    Climate Control Rental Solutions
     
    Aggreko offers rental solutions for your painting/coating project. Dehumidifiers, heating, power and 24/7 service, nationwide.
    844-433-9802
     

     
     
     
     

    Technology Publishing Co., 2100 Wharton Street, Suite 310, Pittsburgh PA 15203-1951

    TEL 1-412-431-8300  • FAX  1-412-431-5428  •  EMAIL webmaster@paintsquare.com


    The Technology Publishing Network

    Durability + Design PaintSquare the Journal of Protective Coatings & Linings Paint BidTracker

     
    EXPLORE:      JPCL   |   PaintSquare News   |   Interact   |   Buying Guides   |   Webinars   |   Resources   |   Classifieds
    REGISTER AND SUBSCRIBE:      Free PaintSquare Registration   |   Subscribe to JPCL   |   Subscribe to PaintSquare News
    MORE:      About PaintSquare.com   |   Privacy policy   |   Terms & conditions   |   Site Map   |   Search   |   Contact Us