PaintSquare.com
      | Connect Follow us on Twitter Like us on Facebook
About | Subscribe | Advertise
  

 


JPCL May 2011

 
JPCL May 2011


View the Digital Edition of this Issue

In This Issue...


Sizing DH for Water Tank Lining Jobs

by Don Schnell, Dehumidification Technologies, LP

The author focuses on sizing dehumidification (DH) for water tank lining projects and discusses how sizing depends on the goals for climate control and on project conditions of the tank, from geographical location to weather conditions and project specifications.


Preparing an Inspection Plan for Bridge Maintenance Painting

by William D. Corbett, KTA-Tator, Inc.

This article reviews the purpose and benefits of developing an inspection plan and reviews SSPC's Guide for Planning Coatings Inspection. Two formats for inspection plans are illustrated, and the author demonstrates how to populate an inspection plan based on the requirements of a bridge coating specification.


Characterizing Surfaces after UHP Waterjetting in New Ship Construction

by Philippe Le Calvé, DCNS, France; Jean-Pierre Pautasso, Direction Générale de I’Armement, France; and Nathalie Le Bozec, French Corrosion Institute

The authors report on the first part of a study on the use of UHP waterjetting for secondary surface preparation in new vessel construction. They focus on the influence of cleaning parameters such as flow pressure or type of waterjetting tools on surface cleanliness, roughness, and holding primer. The results are compared with a traditional grit-blasted surface.


Plus...


News


Project Preview


Editorial

A time to help and something else

by Bill Shoup, Executive Director, SSPC


SSPC News


Top of the News


Problem Solving Forum

On measuring WFT to predict DFT


F-Files: Mechanisms of Failure

A case of premature coating failure on the interior surfaces of bridge box girders

by James D. Machen, Senior Coatings Consultant, KTA-Tator, Inc. Richard Burgess, Series Editor, KTA-Tator, Inc.


Technology

From alkyds to polysiloxanes: A review of bridge coatings

by Chris McMillan, International Paint, LLC


Maintenance Tips

Preventing overspray with a wind monitoring plan

by Julie Dean, Overspray Rx


Show Preview

AWWA Preview


International Bridge Conference Preview


Mega Rust Preview


   

Advanced Recycling Systems
ADVANCED RECYCLING SYSTEMS (ARS)

Recycling Machines, Dust Collectors, Rapid Deployment units are time-tested and approved for the rugged industrial environment. Contact ARS today!
(330)536-8210


Axxiom Manufacturing
Revolutionary Units

By integrating Schmidt's Aftercoolers with our blast pots, these systems remove moisture from air and minimize equipment footprint on jobsite.
Call 1-800-231-2085


CHLOR*RID International Inc.
Hold*Blast

*Stop flash rust
*Provides outstanding
performance
*Easy to use and only pennies
per square foot
*Works with poor quality
water
*Use for mist blasting, vapor
blasting, wet blasting and
UHP WJ
*Leaves no residue and
provides excellent adhesion.


Monti Tools, Inc.
BRISTLE BLASTER® - THE ORIGINAL ONE

Surface cleanliness of SSPC-10 | Anchor profile
up to 4.7 mils | Removes corrosion & coatings |
ATEX approved for zone 1
| www.monti.com | 832-623-7970


Abrasives Inc.
Check our Prices for Blast Abrasives

Faced with higher abrasive costs? We invite you to call & check our rates on Black Magic® coal slag and other quality blast materials. Abrasives Inc. 800-584-7524


Carboline Company
Fireproofing Solutions

Pyroclad® X1 Thermo-Lag® Pyrocrete® – protecting against hydrocarbon and jet fires, explosions, and cryogenic spills.


Sherwin-Williams
Sherwin-Williams Oil & Gas App

Our coatings and linings expertise available 24/7, allowing you to explore the best Sherwin-Williams solutions for oil refineries, shale drilling sites, and offshore. Download today!


Blastox/The TDJ Group, Inc.
Blastox® - One Step Lead Abatement

Sandblast additive delivered to jobsite pre-blended to eliminate hazardous abrasive wastes. Why mix, meter or apply at the job-site? Blast with ease and
Let your painters paint!
1(800)-252-7869


DeFelsko Corporation
PosiTector Inspection Kits

PosiTector 6000 Coating Thickness Gage easily converts to a surface profile gage, dew point meter or ultrasonic wall thickness gage with a simple probe change


Park Derochie Coatings Ltd.
www.ParkDerochie.com

Coatings          Fireproofing
Sandblasting     Scaffolding
Metalizing           Insulation

• Shop & Field Services
• SSPC Certified
• NACE Inspectors on staff
• New Construction &
  Maintenance Programs

 
 
 
 
Technology Publishing

The Technology Publishing Network

The Journal of Protective Coatings & Linings (JPCL) PaintSquare
Durability + Design Paint BidTracker

 
EXPLORE:      JPCL   |   PaintSquare News   |   Interact   |   Buying Guides   |   Webinars   |   Resources   |   Classifieds
REGISTER AND SUBSCRIBE:      Free PaintSquare Registration   |   Subscribe to JPCL   |   Subscribe to PaintSquare News
MORE:      About PaintSquare.com   |   Privacy policy   |   Terms & conditions   |   Site Map   |   Search   |   Contact Us
 

© Copyright 2000-2016, Technology Publishing / PaintSquare, All rights reserved
2100 Wharton Street, Suite 310, Pittsburgh PA 15203-1951; Tel 1-412-431-8300; Fax 1-412-431-5428; E-mail webmaster@paintsquare.com