PaintSquare.com
      | Connect Follow us on Twitter Like us on Facebook
About | Subscribe | Advertise
  

 


JPCL November 2009

 
JPCL November 2009

Investigating Corrosion Protection of Offshore Wind Towers, Part 3: Results of the Laboratory Investigations

by Andreas W. Momber, Ph.D., Muehlhan AG; Peter Plagemann, Ph.D., and Volkmar Stenzel, Ph.D., Fraunhofer Institute for Manufacturing and Applied Materials Research; and Michael Schneider, Ph.D., Fraunhofer Institute for Ceramic Technologies and Systems

In Part 3 of a three-part series, the authors report on corrosive stress on offshore wind towers. Laboratory investigations of several coatings for wind towers are discussed and compared with site testing of the same coatings.


PACE Moves West for 2010

PACE 2010 will take place February 7-10, 2010, in Phoenix, AZ. Get a head start this month with SSPC course previews and a list of exhibitor descriptions known to JPCL at press time. Stay tuned for the full PACE preview in the December 2009 issue.


Test Method for the Estimation of the IMO PSPC "Walk-On Time" for Ballast Tank Coatings

by Serafin Barreiro, Hempel A/S, Kgs.

The author reports on a laboratory study intended to devise an appropriate test method to determine the walk-on time for several ballast tank coatings. The study came in response to the International Maritime Organization's new Performance Standard for Protective Coatings for Dedicated Seawater Ballast Tanks, which now requires walk-on times to be included in job specifications.


Plus...


Editorial

Editorial: What Is Really Important

by Bill Shoup, Executive Director, SSPC


Regulation News

Regulation News: Defendants in Painters' Deaths Get Extension

by Karen A. Kapsanis, JPCL


News

Association, company, and product news


Project Preview


Top Of The News

Q-Lab VP dies; was leader in testing


Problem Solving Forum

Problem Solving Forum: Checking Abrasives in the Field

Many SSPC and ISO standards can be used in the laboratory to check the quality of abrasives, including particle size, moisture content, and contamination. However, what are the most important quality checks to be carried out in the field when using new abrasive?


Case History

Case History: Copper Mine Gets New Support

by David E. Snider and Heather M. Ramsey, Sauereisen Inc.


F-Files: Mechanisms of Failure

Cases from the F-Files: Coating Failures on Galvanized Mast Arms

by Paul Vinik, MSChE, P.E., Florida Department of Transportation and Richard A. Burgess, B.S. , M.S., KTA-Tator, Inc.


From the Offices of SSPC

SSPC News

Vulcan painters achieves historic first


   

Mitsubishi Gas Chemical America
Performance Amine 1,3-BAC

A highly reactive cycloaliphatic diamine offering superior performance. Reasonable cost and curing efficacy makes it suitable for all types of epoxy resin applications.


Carboline Company
We have the solution

We are a global leader in coatings, linings, and fireproofing. We have the right people, right products, and right locations.


Wasser High-Tech Coatings Inc.
Wasser Coatings Protect

Wasser Coatings offer a complete range of Moisture Cure Urethane (NEPCOAT approved) systems in addition to Polyurea membranes and linings(NSF).
www.wassercoatings.com


Polyval Coatings
Polyflex® Polyurea Linings

Polyflex™ new Polyurea Geotextile Membrane System has been specifically engineered to protect the environment in containment applications.
www.polyflexlinings.com


Fischer Technology Inc.
Measure TSA Coatings on Stainless Steel

The PHASCOPE® PMP10 from FISCHER precisely measures thermally sprayed aluminum (TSA) on stainless steel.


Novatek Corporation
Dustless Coatings Removal

Strip it, clean it, and profile it,
all dust free! High production
rates and Blast like finishes.
Comply with new lead
standards.


JAD Equipment Co.
Trak Mats: Don't get Stuck In the Mud

Trak Mats offer more than just plywood. Use over and over for years. www.jadcousa.com


Versaflex Inc.
Best NSF 61.5 Approved Potable Water Polyurea

VersaFlex Polyurea Earns Highest ANSI/NSF 61.5 Rating for High Temp Service, Minimum Tank Size and Max Thickness. All Polyureas Are Not Created Equal. FREE WHITE PAPER. Call 855-337-7745


Montipower, Inc.
The MBX Bristle Blaster

Get a 2.7 to 3.3 mil profile and a Near White Metal Clean. For info visit www.mbxit.com or call 877 629-8777


HoldTight Solutions Inc.
NO FLASH RUST -
NO CONTAMINANTS

Our HoldTight®102 salt remover & flash rust preventer prevents flash rust by removing surface contaminants. It has no equal; only wannabees.
Contact us for your
nearest distributor.
(800) 319.8802 sales@holdtight.com

 
 
 
 
Technology Publishing

The Technology Publishing Network

The Journal of Protective Coatings & Linings (JPCL) PaintSquare
Durability + Design Paint BidTracker

 
EXPLORE:      JPCL   |   PaintSquare News   |   Interact   |   Buying Guides   |   Webinars   |   Resources   |   Classifieds
REGISTER AND SUBSCRIBE:      Free PaintSquare Registration   |   Subscribe to JPCL   |   Subscribe to PaintSquare News
MORE:      About PaintSquare.com   |   Privacy policy   |   Terms & conditions   |   Site Map   |   Search   |   Contact Us
 

© Copyright 2000-2016, Technology Publishing / PaintSquare, All rights reserved
2100 Wharton Street, Suite 310, Pittsburgh PA 15203-1951; Tel 1-412-431-8300; Fax 1-412-431-5428; E-mail webmaster@paintsquare.com