PaintSquare.com
      | Connect Follow us on Twitter Like us on Facebook
About | Subscribe | Advertise
  

 


JPCL September 2009

 
JPCL September 2009

Disbondments of Pipeline Coatings and Their Effects on Corrosion Risks

by D. Melot, G. Paugam, and M. Roche, Total SA, France

This article updates and completes information on recent cases of pipeline coating failures presented at the 16th International Confrence on Pipeline Protection. It also summarizes the results of laboratory test programs intended to explain these coating failures.


Preparing Repair Mortars for Wastewater Service: Broom Finish or Blasted Surface?

by Vaughn O'Dea and Rick Schwab, Tnemec Company, Inc.

The authors summarize the results of an investigation to qualitatively assess adhesion of a protective lining when applied to a broom-finished surface versus a mechanically-profiled concrete surface


The Basics of Deteriorating Concrete at Wastewater Plants: Tips on Causes, Repair, and Resources

by Heather Bayne, SSPC

This article reviews aggressive exporsures within wastewater facilities; degradation of a structure; diagnosis of a corrosion problem; repair; and prevention of corrosion


Plus...


News

SSPC News: SSPC Training Spans the Globe


Letters to the Editor: On Units for Measuring Chloride Contamination


Companies

Company News


Products

Product News


Project Preview


Top of the News

Costello promoted at International; Clemco's Dave Hansel dies


Problem Solving Forum

Problem Solving Forum: How to Set Up Ventilation in Confined Spaces

How do you set up ventilation equipment for worker protection where access is difficult, such as manholes?


F-Files: Mechanisms of Failure

The Case of the Shop Job: Coated Equipment Sent North but Coating Performance Went South

by Jayson L. Helsel, P.E., KTA-Tator, Inc.; Richard Burgess, KTA-Tator, Inc., Series Editor


Case History

Case History: Custom Platform Was Key in Lining Power Plant Stack

by Daryl Fleming, Assistant Editor, JPCL


Associations

Association News

WEFTEC Celebrates Its 82nd Year in Orlando


   

Axxiom Manufacturing
Schmidt Improves
Portable Blasters

Schmidt's VBS System reduces blowdown intensity, prevents exhaust from damaging floor while using no screens or filters. Reduces sound; Increasing safety.
Call 1-800-231-2085


Carlisle Fluid Technologies
Built for Tough Jobs

From Epoxies to Urethanes to other high solid coatings, the new Binks Airless 75 delivers a great finish using an ergonomic design. Visit binks.com for more information.


Monti Tools, Inc.
BRISTLE BLASTER® - THE ORIGINAL ONE

Surface cleanliness of SSPC-10 | Anchor profile
up to 4.7 mils | Removes corrosion & coatings |
ATEX approved for zone 1
| www.monti.com | 832-623-7970


Montipower, Inc.
The MBX Bristle Blaster

Get a 2.7 to 3.3 mil profile and a Near White Metal Clean. For info visit www.mbxit.com or call 877 629-8777


CHLOR*RID International Inc.
HOLD*BLAST: Buy time for pennies per sq ft.

* Stop flash rust
* Vapor blasting
* Wet blasting
* UHP water jetting
* No residue


Nationwide Overspray
Profession Overspray Removal Services

The Finest Name in Safe Overspray Removal. We specialize in removing all contaminants from any surface. Family Owned and Operated for 33 years! Fully insured. Satisfaction is guaranteed.


Jotun Paints Inc.
Jotachar JF750 - The Time Saving Solution

The only mesh free solution for jet fire scenarios. Jotachar saves installation time and material costs - the next generation of epoxy passive fire protection.


SEMicro Division, M.E. Taylor Engineering, Inc.
Coatings Adhesion Testers

The PATTI® accurately measures the bond strength between coating & substrate. Outfitted properly, the surface can be rough, porous, or curved & >10K psi strong!


Abrasives Inc.
Check our Prices for Blast Abrasives

Faced with higher abrasive costs? We invite you to call & check our rates on Black Magic® coal slag and other quality blast materials. Abrasives Inc. 800-584-7524


NACE International, The Corrosion Society
Advance Your Coating Inspector Career

By completing the world’s most recognized program, NACE’s CIP, you’ll be better trained and qualified on inspection of surface preparation and coatings application.

 
 
 
 
Technology Publishing

The Technology Publishing Network

The Journal of Protective Coatings & Linings (JPCL) PaintSquare
Durability + Design Paint BidTracker

 
EXPLORE:      JPCL   |   PaintSquare News   |   Interact   |   Buying Guides   |   Webinars   |   Resources   |   Classifieds
REGISTER AND SUBSCRIBE:      Free PaintSquare Registration   |   Subscribe to JPCL   |   Subscribe to PaintSquare News
MORE:      About PaintSquare.com   |   Privacy policy   |   Terms & conditions   |   Site Map   |   Search   |   Contact Us
 

© Copyright 2000-2016, Technology Publishing / PaintSquare, All rights reserved
2100 Wharton Street, Suite 310, Pittsburgh PA 15203-1951; Tel 1-412-431-8300; Fax 1-412-431-5428; E-mail webmaster@paintsquare.com