GOING BEYOND INDUSTRY STANDARDS
The ADI HD40 Dust Collector is a smaller, more
economical way to meet/ exceed Industry standards.
Watch the video for details on our website.
NO FLASH RUST -
Our HoldTight®102 salt remover & flash rust preventer prevents flash
rust by removing surface contaminants. It has no equal; only wannabees.
Contact us for your
(800) 319.8802 firstname.lastname@example.org
Dustmaster®8,000 CFM Dust Collector
An 8,000 CFM maximum air flow rate, 50 HP, Tier 4i Diesel Engine, and two 16” I.D. duct inlets provide the widest CFM range in its class. Available for purchase or rent.
Termarust (HR CSA) Chemically Stops
Hydro Utility Penstock Overcoated in 1997. Was power washed and overcoated with major cost saving. No environmental impact with Termarust's low LC50 of 41,007 ppm.
Paul N. Gardner Company
We are distributors, producers & designers of physical testing instruments for the paint, coating & related industries. Contact us at 954-946-9454 or 1-800-762-2478 or visit www.gardco.com.
By integrating Schmidt's
Aftercoolers with our blast pots, these systems remove moisture from air and minimize equipment footprint on jobsite.
ADVANCED RECYCLING SYSTEMS (ARS)
Recycling Machines, Dust Collectors,
Rapid Deployment units are time-tested
and approved for the rugged industrial
environment. Contact ARS today!